clever FFmpeg-GUI, small FFmpeg UI, fully portable, no installation.

[Findu]

@ ProWo

3.4.2.01 Feedback 2

How about making some cosmetic changes in Multiplex "Other Settings" when using Sample?
- I am not sure if you can activat/deactivate "Fast start" for Samples.
- Muxed streams always remain in the grid using Samples, so the feature may be grayed out or disappear.
- The chapters are set correctly using Samples so that feature stay.

[Attachment 87364 - Click to enlarge]

Wouldn't it now make sense to leave the Multiplex page open after "Simple Remux" as long as streams remain in the grid like with normal Multiplex?

[ProWo]

How about making some cosmetic changes in Multiplex "Other Settings" when using Sample?
- I am not sure if you can activat/deactivate "Fast start" for Samples.

Fast start works with samples too.

Muxed streams always remain in the grid using Samples, so the feature may be grayed out or disappear.

If you mux a sample, it makes no sense to remove the streams. A sample can be repeated as often as you like.
Afterwards, everything remains open and ready for the final muxing.

Wouldn't it now make sense to leave the Multiplex page open after "Simple Remux" as long as streams remain in the grid like with normal Multiplex?

Yes, of course, will change this.

[Findu]

>> Muxed streams always remain in the grid using Samples, so the feature may be grayed out or disappear.
> If you mux a sample, it makes no sense to remove the streams. A sample can be repeated as often as you like.
Afterwards, everything remains open and ready for the final muxing.

Of course. I mean, everything works as it should.
However, the "Remove multiplexed streams" feature is still visible and enabled when Sample is enabled, so it's normal to assume this removal will happens even if it doesn't make sense.
For this reason, it may be better to disable this feature or make it disappear while Sample is enabled.

[davidt1]

The newest version does not automatically remove muxed streams like the version you sent me.

With remove muxed streams checked (default) the muxed streams are removed from the grid.

There is now a pop-up message that says something like the file is successfully muxed that forces me to close it before I can mux the next file. The version you sent me automatically remove the muxed streams and does not waste my time with the pop up message.

This message is intended and is shown only, if there are residual streams after muxing.

Can you please send me that one again?

No, this file was a temporary file, no longer available.

The newest version works the way it has always worked.

1 Pop-up message comes up every time forcing me to close it.

[Attachment 87365 - Click to enlarge]

2. After pop-message is cleared, no longer needed streams are still there and require a manual clearing for them to disappear.

[Attachment 87366 - Click to enlarge]

I guess I was lucky for a few days when you gave me the version that automatically clear the muxed file with no annoying pop-up message that force me to close it.

Edit: after looking through my computer, I saw a copy of a previous version without the language codes but works the way I like. I will use this version instead. I have to type in the language codes, but won't have to constantly click to close the pop-up message and to remove the muxed file.

The lesson for me is: make a copy of the version that you like before updating. Thanks.

[videoAI]

If you know the version number that you liked, post it.
May be one of the users hasn't updated yet and can send you a copy.

The lesson for me is: make a copy of the version that you like before updating. Thanks.

[ProWo]

@Findu
@davidt1

Test my actual beta.
https://www.upload.ee/files/18215647/clever_FFmpeg_GUI.zip.html

[Findu]

@ ProWo

3.4.2.02 Feedback

The cosmetic changes on the Multiplex and Chapters page are good!

When you create new chapters, the file Chapters.txt is created.
But the new beta is looking for Created_chapters.txt so you can not use Edit chapters as that file does not exist.
And Multiplex does not create an output file caused by the missing Created_chapters.txt file too.

New idea:
Automatic creation of chapters every x minute. Usefull for long events like six hours Tour de France stages.

---

Should this be visible with Simple remux?
I guess hidden streams only appear for added files and get automatically removed for source files?

[Attachment 87370 - Click to enlarge]

Good to know: Selecting a single stream is enough to Simple remux the entire file!

Hovering over the text always show this information:

[Attachment 87369 - Click to enlarge]

[Findu]

@ ProWo

3.4.2.02 Feedback 2

Info:
If you edit the Idx grid field and it stay empty, or it is not a number or a long number like 77777777777, you get a DataGridView error message.
You also can enter letters and special characters into the Delay field, but that gets ignored while multiplexing.
But why should someone do that!?

Should this be visible?

[Attachment 87375 - Click to enlarge]

How about merging the scattered help text?

[Attachment 87376 - Click to enlarge]

[videoAI]

@ProWo

I have a ts file that doesn't load properly in 'clever', but plays OK in MPC.

if I try loading it in Multiplex, nothing is loaded, and nothing happens.

if I try loading it in open source file, I get no streams, but a single png attachment !!!


[Attachment 87379 - Click to enlarge]

and I get an error right away as shown ...

==========================
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at clever_FFmpeg_GUI.Form2.Read_Top_RL(String& aa0)
at clever_FFmpeg_GUI.Form2.Show_Tracks()
at clever_FFmpeg_GUI.Form2.New_inputfile()
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9300.0 built by: NET481REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
clever FFmpeg GUI
Assembly Version: 1.0.0.0
Win32 Version: 3.4.2.01
CodeBase: file:///C:/Portable/PortableApps/CleverFFmpegGUI/clever%20FFmpeg%20GUI.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.8.9032.0 built by: NET481REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9282.0 built by: NET481REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9297.0 built by: NET481REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9256.0 built by: NET481REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9032.0 built by: NET481REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9032.0 built by: NET481REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9032.0 built by: NET481REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9214.0 built by: NET481REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
PortableSettingsProvider
Assembly Version: 0.2.5.0
Win32 Version: 0.2.5.0
CodeBase: file:///C:/Portable/PortableApps/CleverFFmpegGUI/PortableSettingsProvider.DLL
----------------------------------------
System.Xml.Linq
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9032.0 built by: NET481REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9032.0 built by: NET481REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Web.Extensions
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9282.0
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Web.Extensions/v4.0_4.0.0.0__31bf3856ad364e35/System.Web.Extensions.dll
----------------------------------------
System.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.8.9282.0 built by: NET481REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_64/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
==========================

Ts File Media Info:
===========
General
ID : 1 (0x1)
Complete name : C:\T\Test.ts
Format : MPEG-TS
File size : 728 MiB
Duration : 4 h 26 min
Overall bit rate mode : Variable
Overall bit rate : 382 kb/s
Frame rate : 30.000 FPS

Video
ID : 256 (0x100)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.1
Format settings : 1 Ref Frames
Format settings, CABAC : No
Format settings, Reference fra : 1 frame
Codec ID : 27
Duration : 8 s 283 ms
Bit rate mode : Variable
Maximum bit rate : 1 600 kb/s
Width : 854 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate : 30.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive

Audio
ID : 257 (0x101)
Menu ID : 1 (0x1)
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Format version : Version 4
Muxing mode : ADTS
Codec ID : 15-2
Duration : 8 s 363 ms
Bit rate mode : Variable
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 48.0 kHz
Frame rate : 46.875 FPS (1024 SPF)
Compression mode : Lossy
Delay relative to video : -21 ms

Any thoughts?

Many thanks for your help ..

Bug #6 (out of ??)

As always .. there is nothing wrong with my environment

[ProWo]

When you create new chapters, the file Chapters.txt is created.
But the new beta is looking for Created_chapters.txt so you can not use Edit chapters as that file does not exist.
And Multiplex does not create an output file caused by the missing Created_chapters.txt file too.

This is already fixed. Redownload from post #1986

New idea:
Automatic creation of chapters every x minute. Usefull for long events like six hours Tour de France stages.

Should this be visible with Simple remux?

Yes, as you have already noticed, it is sufficient to select a stream for simple remux and the entire file with all streams will be remuxed. The display shows you how many streams are being remuxed.

I guess hidden streams only appear for added files and get automatically removed for source files?

No, I have changed that. Now you can select and hide any stream.

Hovering over the text always show this information:

This is an old tooltip that I have forgotten.
Will be fixed.

[ProWo]

Info:
If you edit the Idx grid field and it stay empty, or it is not a number or a long number like 77777777777, you get a DataGridView error message.
You also can enter letters and special characters into the Delay field, but that gets ignored while multiplexing.
But why should someone do that!?

Exactly.

Should this be visible?

Yes, as additional information that the Mux Grid is empty.

How about merging the scattered help text?

Will be done.

[davidt1]

@Findu
@davidt1

Test my actual beta.
https://www.upload.ee/files/18202380/clever_FFmpeg_GUI.zip.html

I really appreciate your quick response. This beta is very close to the one you gave me.

1. No more pop-up message.
2. 2 character language code is shown automatically.
3. after muxing, the files are cleared automatically, as they should be.

4. However, after muxing, the muxing page disappear. I have to click on the "Muxing" button each time to do a new file. Please make the muxing page stay.

Thank you.

[ProWo]

@ProWo
I have a ts file that doesn't load properly in 'clever', but plays OK in MPC.
if I try loading it in Multiplex, nothing is loaded, and nothing happens.
if I try loading it in open source file, I get no streams, but a single png attachment !!!
and I get an error right away as shown ...

Could you try to open it in Avdemux, cut a 30 seconds piece and post it here?
So i can have a look.

[ProWo]

4. However, after muxing, the muxing page disappear. I have to click on the "Muxing" button each time to do a new file. Please make the muxing page stay.

The muxing page only disappears when there are no more streams in the mux grid.
Simply move several videos into it for muxing, then you can work through them one by one.

[davidt1]

4. However, after muxing, the muxing page disappear. I have to click on the "Muxing" button each time to do a new file. Please make the muxing page stay.

The muxing page only disappears when there are no more streams in the mux grid.
Simply move several videos into it for muxing, then you can work through them one by one.

Drag and drop is how I use this app. Maybe using the "Add file" button will make it behave differently? Anyway:

1. I drag and drop 2 files and 4 subs to be muxed. Only the top file is muxed.

[Attachment 87381 - Click to enlarge]

2. After muxing, the muxing page disappears.

[Attachment 87382 - Click to enlarge]

3. Clicking on the "Mutiplex" button brings back an empty page. This page should stay on after the streams are cleared.

[Attachment 87383 - Click to enlarge]

Is there a way for me to send you the file I like using? I tried to upload it here, but the website says it is an invalid file. Thanks.

[ProWo]

Drag and drop is how I use this app. Maybe using the "Add file" button will make it behave differently? Anyway:

1. I drag and drop 2 files and 4 subs to be muxed. Only the top file is muxed.

No, all is muxed this way, both videos and all 4 subs, because you have selected all streams on the left.

You only see 1 video as output, because the file name of the first selected stream is used and all streams are muxed into this file.
If you open this output file in clever FFmpeg GUI, you will find 8 streams in it, 2 video, 2 audio and 4 subtitle streams.

The correct way (for your example) would be to select only the first 4 streams on the left (the ones with the same name), then click on Multiplex.
After muxing, the window would then remain open with the remaining 4 streams for muxing.
If you have also muxed these, you will find 2 videos in the destination folder, as expected.

2. After muxing, the muxing page disappears.

Of course, there are no more streams to mux.

3. Clicking on the "Mutiplex" button brings back an empty page. This page should stay on after the streams are cleared.

For what?

Is there a way for me to send you the file I like using? I tried to upload it here, but the website says it is an invalid file.

This is not necessary.

[Findu]

@ ProWo

Wouldn't it make sense to offer the "Stay Open" function on the multiplex page? As usual, it's disabled by default and wouldn't disrupt the logical automatic closing of the page when the grid empties.
With "Stay Open" enabled, you just drop the necessary streams and then mux them all, then drop the next required streams and mux them all again, and so on.

[davidt1]

Drag and drop is how I use this app. Maybe using the "Add file" button will make it behave differently? Anyway:

1. I drag and drop 2 files and 4 subs to be muxed. Only the top file is muxed.

No, all is muxed this way, both videos and all 4 subs, because you have selected all streams on the left.

You only see 1 video as output, because the file name of the first selected stream is used and all streams are muxed into this file.
If you open this output file in clever FFmpeg GUI, you will find 8 streams in it, 2 video, 2 audio and 4 subtitle streams.

The correct way (for your example) would be to select only the first 4 streams on the left (the ones with the same name), then click on Multiplex.
After muxing, the window would then remain open with the remaining 4 streams for muxing.
If you have also muxed these, you will find 2 videos in the destination folder, as expected.

2. After muxing, the muxing page disappears.

Of course, there are no more streams to mux.

3. Clicking on the "Mutiplex" button brings back an empty page. This page should stay on after the streams are cleared.

For what?

Is there a way for me to send you the file I like using? I tried to upload it here, but the website says it is an invalid file.

This is not necessary.

I vaguely remember you saying that multiple files and added before muxing. I used 2 files and 4 subs as an example. Normally, I drag one file and 2 subs. Mux them and add another file and 2 subs. This is why I need the mux page to remain open. Otherwise I have click on the "Multiplex" button for each file. Often time I do up to 10 files. That's a lot clicking. I am not asking for anything different. You already gave me a version that works exactly the way I like. It's my fault I lost it.

The version I using now keeps the mux page open but without the language codes. I am happy enough. Though I would even happier if it display the language codes. Thanks.

[videoAI]

@ ProWo
What's the harm in giving users a choice, even if you disagree with it.

@ ProWo
Wouldn't it make sense to offer the "Stay Open" function on the multiplex page? As usual, it's disabled by default and wouldn't disrupt the logical automatic closing of the page when the grid empties.
With "Stay Open" enabled, you just drop the necessary streams and then mux them all, then drop the next required streams and mux them all again, and so on.

[ProWo]

Ok, ok folks, I've added it.
Redownload here:
https://forum.videohelp.com/threads/396490-clever-FFmpeg-GUI-small-FFmpeg-UI-fully-por...67#post2776372
and test it.

[Findu]

@ ProWo

>> I guess hidden streams only appear for added files and get automatically removed for source files?
> No, I have changed that. Now you can select and hide any stream.

Oh right! You replaced "Remove streams" with "Hide streams".
So you can't accidentally delete streams. Good idea!
And of course, it has the advantage of being able to display streams again, by click at "Show hidden" or automatic after muxing, but that should not happen after you mux a sample.
The hidden streams remain highlighted when unhiding, but when you click "None" to deactivate all streams, this also apply to hidden streams. Could the hidden streams be excluded from this when you click "None"? This makes it easier to hide them again or add new ones.

---

"Stay open" on the multiplex page is working as intended. Thank you very much!
I personally don't need it - so far

[ProWo]

The hidden streams remain highlighted when unhiding, but when you click "None" to deactivate all streams, this also apply to hidden streams. Could the hidden streams be excluded from this when you click "None"? This makes it easier to hide them again or add new ones.

I will change this so that All/None only affects the visible streams.

[videoAI]

@ ProWo
I tried opening the video file in many video editing tools. Ended up with errors or refusal to open the file.
Seems odd since the file has conformant video/audio streams.

More detailed info from MPC Filter properties tabs:

MPC Video Decoder

Video: H.264/AVC 854x480 (16:9) 30fps

AM_MEDIA_TYPE:
majortype: MEDIATYPE_Video {73646976-0000-0010-8000-00AA00389B71}
subtype: MEDIASUBTYPE_AVC1{31435641-0000-0010-8000-00AA00389B71}
formattype: FORMAT_MPEG2_VIDEO {E06D80E3-DB46-11CF-B4D1-00805F6CBBEA}
bFixedSizeSamples: 0
bTemporalCompression: 1
lSampleSize: 1
cbFormat: 178

VIDEOINFOHEADER:
rcSource: (0,0)-(854,480)
rcTarget: (0,0)-(854,480)
dwBitRate: 0
dwBitErrorRate: 0
AvgTimePerFrame: 333333 (30.000 fps)

VIDEOINFOHEADER2:
dwInterlaceFlags: 0x00000000
dwCopyProtectFlags: 0x00000000
dwPictAspectRatioX: 16
dwPictAspectRatioY: 9
dwControlFlags: 0x00000000
dwReserved2: 0x00000000

MPEG2VIDEOINFO:
dwStartTimeCode: 0
cbSequenceHeader: 46
dwProfile: 0x0000004d
dwLevel: 0x0000001f
dwFlags: 0x00000004

BITMAPINFOHEADER:
biSize: 40
biWidth: 854
biHeight: 480
biPlanes: 1
biBitCount: 24
biCompression: AVC1
biSizeImage: 1230720
biXPelsPerMeter: 0
biYPelsPerMeter: 0
biClrUsed: 0
biClrImportant: 0

Extradata: 46
0000: 00 26 67 4d 40 1f 95 a0 36 0f 79 bf fc 14 00 14 .&gM@.•*6.y¿ü...
0010: 04 40 00 00 fa 00 00 3a 98 38 00 00 18 6a 00 00 .@..ú..:˜8...j..
0020: 61 a8 2e f2 e0 f8 e1 55 00 04 68 ce 3c 80 a¨.òàøáU..hÎ<€
- Enumerated media type 0:

MPC Audio Renderer

Audio: IEEE Float 48000Hz 2.0 chn 3072 kbit/s

AM_MEDIA_TYPE:
majortype: MEDIATYPE_Audio {73647561-0000-0010-8000-00AA00389B71}
subtype: MEDIASUBTYPE_IEEE_FLOAT{00000003-0000-0010-8000-00AA00389B71}
formattype: FORMAT_WaveFormatEx {05589F81-C356-11CE-BF01-00AA0055595A}
bFixedSizeSamples: 1
bTemporalCompression: 0
lSampleSize: 8
cbFormat: 18

WAVEFORMATEX:
wFormatTag: 0x0003
nChannels: 2
nSamplesPerSec: 48000
nAvgBytesPerSec: 384000
nBlockAlign: 8
wBitsPerSample: 32
cbSize: 0 (extra bytes)

Could you try to open it in Avdemux, cut a 30 seconds piece and post it here?
So i can have a look.

[ProWo]

@VideoAI
You could try to remux the file with ffmpeg.
ffmpeg -analyzeduration 100M -probesize 50M - i "input.ts" -map 0 -c copy output.mkv

[videoAI]

Tried your command and was getting errors reading the input .. then I tried this command w/audio:

ffmpeg -hide_banner -analyzeduration 100M -probesize 50M -i "test.ts" -map 0 -c copy -bsf:a aac_adtstoasc -y output.mkv

the conversion lasted ~ 10 sec, created output.mkv, and I got this log:

===
Input #0, png_pipe, from 'test.ts':
Duration: N/A, bitrate: N/A
Stream #0:0: Video: png, rgba(pc, gbr/bt709/iec61966-2-1), 1x1 [SAR 4724:4724 DAR 1:1], 25 fps, 25 tbr, 25 tbn
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Output #0, matroska, to 'output.mkv':
Metadata:
encoder : Lavf61.7.100
Stream #0:0: Video: png (MPNG / 0x474E504D), rgba(pc, gbr/bt709/iec61966-2-1), 1x1 [SAR 4724:4724 DAR 1:1], q=2-31, 25 fps, 25 tbr, 1k tbn
Press [q] to stop, [?] for help
[out#0/matroska @ 000002998bfba200] video:745788KiB audio:0KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: 0.004440%
frame= 743 fps=224 q=-1.0 Lsize= 745821KiB time=00:00:29.72 bitrate=205577.5kbits/s speed=8.96x

===
test.ts {the input}, size= 745,788 kb --- plays fine in mpc ---
output.mkv {created}, size= 745,821 kb --- unplayable in mpc ---
===

@VideoAI
You could try to remux the file with ffmpeg.
ffmpeg -analyzeduration 100M -probesize 50M - i "input.ts" -map 0 -c copy output.mkv

[Findu]

@ ProWo

Can you please be so kind and add an own "Frame accurate cut" help page.
For example, to explain that you set the CRF level for all cuts right at the beginning. Or that editing requires three steps.

[ProWo]

@VideoAI

Could you post the full messages from this command?

ffmpeg - i test.ts

[ProWo]

@ ProWo

Can you please be so kind and add an own "Frame accurate cut" help page.
For example, to explain that you set the CRF level for all cuts right at the beginning. Or that editing requires three steps.

The 3 steps are mentioned, hoovering over Frame accurate cut.
Will add a tooltip to the CRF setting.

[davidt1]

Ok, ok folks, I've added it.
Redownload here:
https://forum.videohelp.com/threads/396490-clever-FFmpeg-GUI-small-FFmpeg-UI-fully-por...67#post2776372
and test it.

Thank you so much.

[videoAI]

@ProWo

output log:

ffmpeg version 7.1.1-full_build-www.gyan.dev Copyright (c) 2000-2025 the FFmpeg developers
built with gcc 14.2.0 (Rev1, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-lcms2 --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-libdvdnav --enable-libdvdread --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libopenjpeg --enable-libquirc --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-libqrencode --enable-librav1e --enable-libsvtav1 --enable-libvvenc --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-liblc3 --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 59. 39.100 / 59. 39.100
libavcodec 61. 19.101 / 61. 19.101
libavformat 61. 7.100 / 61. 7.100
libavdevice 61. 3.100 / 61. 3.100
libavfilter 10. 4.100 / 10. 4.100
libswscale 8. 3.100 / 8. 3.100
libswresample 5. 3.100 / 5. 3.100
libpostproc 58. 3.100 / 58. 3.100

Input #0, png_pipe, from 'test.ts':
Duration: N/A, bitrate: N/A
Stream #0:0: Video: png, rgba(pc, gbr/bt709/iec61966-2-1), 1x1 [SAR 4724:4724 DAR 1:1], 25 fps, 25 tbr, 25 tbn
At least one output file must be specified

Press any key to continue . . .

Created no output file

@VideoAI

Could you post the full messages from this command?

ffmpeg - i test.ts