New tool - VapourBox

[aramkolt]

that message tells you repeatedly, that is is VFM filter that accepts 8bit only

Ok, so that is to say that not all features (including inverse telecine - which I think is what VFM was doing here) work with 10 bit video such as ProRes422?

Selur's Hybrid nor Staxrip seems to have the problem with IVTC'ing ProRes based on prior testing.

[StuartCameronCode]

Ok kids, you can stop arguing - I added an IVTC / ProRes422 workaround in the latest 0.9.10 release.

New release - v0.9.10!!!

https://github.com/StuartCameronCode/VapourBox/releases

Since I last updated on here we've now got:
- Frame accurate seeking in the preview window*
- Inline warnings about quality loss if filters require a lower bit depth
- Frame rate fix for field-coded interlaced sources
- Support for MacOS versions all the way back to 12.0 for Intel CPUs
- Lots of other behind the scenes fixes and test suites to prevent regression bugs

Please report any new issues to https://github.com/StuartCameronCode/VapourBox/issues so I can keep track of everything. Thanks everyone!

[aramkolt]

Thanks for the update!

Preview window works at least for crop, but the detelecine doesn't nor does the split screen aspect at least for me, see attached - says "no preview" on the left and right side still appears interlaced despite IVTC filter

I can post a Google Drive link to a relatively short ProRes422 unprocessed (still interlaced) capture file if that'd be helpful.

Thanks for all of your hard work, seems like a great interface, I just seem to still find roadblocks on the Mac ARM version at least.

[StuartCameronCode]

Thanks for the update!

Preview window works at least for crop, but the detelecine doesn't nor does the split screen aspect at least for me, see attached - says "no preview" on the left and right side still appears interlaced despite IVTC filter

I can post a Google Drive link to a relatively short ProRes422 unprocessed (still interlaced) capture file if that'd be helpful.

Thanks for all of your hard work, seems like a great interface, I just seem to still find roadblocks on the Mac ARM version at least.

That'd be helpful if you could, thanks!

[jshohio]

has anyone had any issues with loading video ts folders into vapourbox? i can load individual vob files, but whenever i try to load a video ts folder it always "fails." tia if anyone has any suggestions.

[aramkolt]

Thanks for the update!

Preview window works at least for crop, but the detelecine doesn't nor does the split screen aspect at least for me, see attached - says "no preview" on the left and right side still appears interlaced despite IVTC filter

I can post a Google Drive link to a relatively short ProRes422 unprocessed (still interlaced) capture file if that'd be helpful.

Thanks for all of your hard work, seems like a great interface, I just seem to still find roadblocks on the Mac ARM version at least.

That'd be helpful if you could, thanks!

Here's a link to the video I was testing it with: https://drive.google.com/file/d/1tZktiQhx1KIkKllOre_Zb-Sm0ncvgYOf/view?usp=sharing

It should be IVTC-able since it's a music video that would have been shot at film rates and is just a typical ProRes 10 bit capture. Thanks!

[Sharc]

Here's a link to the video I was testing it with: https://drive.google.com/file/d/1tZktiQhx1KIkKllOre_Zb-Sm0ncvgYOf/view?usp=sharing

It should be IVTC-able since it's a music video that would have been shot at film rates and is just a typical ProRes 10 bit capture. Thanks!

Your video is field blended. It can't just be IVTCed.

Here an attempt of a fix (video only, first 1000 frames):

[aramkolt]

Here's a link to the video I was testing it with: https://drive.google.com/file/d/1tZktiQhx1KIkKllOre_Zb-Sm0ncvgYOf/view?usp=sharing

It should be IVTC-able since it's a music video that would have been shot at film rates and is just a typical ProRes 10 bit capture. Thanks!

Your video is field blended. It can't just be IVTCed.

Here an attempt of a fix (video only, first 1000 frames):

Interesting - this came off of a U-Matic distribution copy of the music video which would have been used and entities like MTV. Basically all such U-Matic content I've come across does fine with IVTC, so wonder why this one ended up different?

[Sharc]

Basically all such U-Matic content I've come across does fine with IVTC, so wonder why this one ended up different?

My best guess: Because the source was not 24fps film but 25fps (ore some artwork mix) which got poorly framerate converted by fieldblending instead of applying proper pulldown.

[Alwyn]

Super minor points, the program "Close" cross at the top right of the window only appears when I put my mouse pointer over the area. It would be good to have it visible all the time.

The side-pointing arrow entices me to click on it. Nothing happens. I suspect it is indicating that there are more controls, which are at the bottom, so perhaps it should be a down-arrow and the controls panel then pops up immediately below the pipeline item? Or just remove the side-facing arrow altogether?


[Attachment 93022 - Click to enlarge]

[StuartCameronCode]

Super minor points, the program "Close" cross at the top right of the window only appears when I put my mouse pointer over the area. It would be good to have it visible all the time.

Odd, I'll take a look. The program's not doing anything special to try to hide the close button, so... ? Will add it to my TODO list.

The side-pointing arrow entices me to click on it. Nothing happens. I suspect it is indicating that there are more controls, which are at the bottom, so perhaps it should be a down-arrow and the controls panel then pops up immediately below the pipeline item? Or just remove the side-facing arrow altogether?

This has bugged me too for a while but has been low enough down the list I haven't gotten to it. I'd personally like each section to expand and contract in-place rather than showing as another section disconnected below. I'll bump it up the list a bit, thanks.

[jshohio]

has anyone had any issues with loading video ts folders into vapourbox? i can load individual vob files, but whenever i try to load a video ts folder it always "fails." tia if anyone has any suggestions.

the error message i get whenever i try to load a video ts folder into vapoubox contains this line:

================================================== ================================
application support/vapourbox/macos-arm64lib/libdvdread.dylib not valid for use in process: mapping process and mapped file (non-platform) have different team IDs.
================================================== ================================

i'm hoping this might reveal what the underlying issue is.

i have the latest edition of vapourbox and mac os 26.5.2

[Big Vic]

Thank you for creating Vapourbox! I was looking for a high powered deinterlacer/denoiser for Mac OS and since the Hybrid app stopped working on Mac OS, I didn't know what to use until yesterday! I did a render on a video that was very noisey and once I figured out the parameters to use, the video came out extra clean. It got rid of all the noise and maintained the detail of the video. Im excited to include this in my upscaling workflow and I look forward to the potential updates and upgrades to be added to an already fantastic tool! Thanks again!

[Big Vic]

I did a render the other day using Vapourbox and noticed some “shaking” along edges. I read that it needs “anti-aliasing” filter but I don’t know how to install it in Vapourbox. Can some explain to me like I’m 5 years old on how to do it? Any help will be much appreciated.

[Alwyn]

"Shaking along edges" sounds like lack of a stabiliser of some type. Could you be more specific, or post a short capture showing it?