DVD Rebuilder

[jyn999]

Simply put I tried a different DVD file and followed the instructions given in the snapshot posted, I also changed the MPEG fille to the .dll and it appeared to have solveThe problem, However, now the PC is freezing before encode is complete????

1. Did you enter the exact path as in the screenshot or did you adjust it to match your computer?
2. What do you mean by "tried a different DVD file"? Another DVD movie?
3. If you meant a different DVD movie, did you rip the files from the DVD to your hard drive?

[Jah_Rankin]

Simply put I tried a different DVD file and followed the instructions given in the snapshot posted, I also changed the MPEG fille to the .dll and it appeared to have solveThe problem, However, now the PC is freezing before encode is complete????

1. Did you enter the exact path as in the screenshot or did you adjust it to match your computer?
2. What do you mean by "tried a different DVD file"? Another DVD movie?
3. If you meant a different DVD movie, did you rip the files from the DVD to your hard drive?

1.Adjusted for my computer along with the new MPEG file.
2.3. A different movie that was ripped to hard drive.

I want to start from scratch with my set up, what proggys doI need to down load?

Is decoder fix one of the programs needed?

should I extract all proggys in the same folder?

[Jah_Rankin]

Jah_Rankin

If you are using CCE SP 2.5 you only need set the path to EclCCE in the CCE SP 2.50 box or Rebuilder setup. The others boxes are for CCE Basic (does not need EclCCE) or for CCE SP 2.66 and above (EclCCE only for the trials).
If you have for example CCE SP 2.50 and CCE SP 2.66 trial in your computer, you need EclCCE for both, but they can not be the same EclCCE: You need two separated copies of EclCCE installed in different directories and each of them set to point to the corresponding version or CCE SP.

Second, you have to select in Rebuilder, in Options\CCE Options what version of CCE you are going to use.

What if I have CCe sp 2.50 retail version, do I still need EcLCCE file, also is avi syn 2.55 needed, if so where do i install the avi file?

[lacywest]

delete ... delete......................................delete d

Glad to help and thanks for your posting but you didn't have to share intimate details of your personal life [/quote]


I sent you a PM message ... LOL

[lacywest]

Simply put I tried a different DVD file and followed the instructions given in the snapshot posted, I also changed the MPEG fille to the .dll and it appeared to have solveThe problem, However, now the PC is freezing before encode is complete????

1. Did you enter the exact path as in the screenshot or did you adjust it to match your computer?
2. What do you mean by "tried a different DVD file"? Another DVD movie?
3. If you meant a different DVD movie, did you rip the files from the DVD to your hard drive?

1.Adjusted for my computer along with the new MPEG file.
2.3. A different movie that was ripped to hard drive.

I want to start from scratch with my set up, what proggys doI need to down load?

Is decoder fix one of the programs needed?

should I extract all proggys in the same folder?

The questions your asking ... did you read my post ???

PM me ... for my email address and I will send you a zip file containing the programs I used.

Your email came back non delivered.

So ... try this instead

----------------------------------------------

Right-Click mouse button ... use option "save target as"

http://home.pacbell.net/m4mach10/DVD_ReBuilder_0.64a___addons.zip

Note: ... there is not any warez in that zip file .... just an easier way to gather up the files all in one zip file. CCE encoder is not in that zip file.

[Jah_Rankin]

Any DVD RB error messages? Do you have enough free disc space? You need about 15 GB for the temporary and working files generated by DVD RB.

The disc space is enough and there's no error message @all the pc is just froozen and have to be reboothed.

1.The encoder finally ran and guess what, after 3 hours it have the size of the original dvd in the video ts folder, how is this?

[jyn999]

1.The encoder finally ran and guess what, after 3 hours it have the size of the original dvd in the video ts folder, how is this?

Very strange What is the total size of the files in the VIDEO_TS folder created by DVD RB and the VIDEO_TS folder in your DVD disc?

[Jah_Rankin]

1.The encoder finally ran and guess what, after 3 hours it have the size of the original dvd in the video ts folder, how is this?

Very strange What is the total size of the files in the VIDEO_TS folder created by DVD RB and the VIDEO_TS folder in your DVD disc?

The total file size in dvdrb video _ts folder is 10 gb with 35 files. The original dvd on hard drive is 7.53 gb with 33 files.

[jyn999]

1. Have you set DVD RB to automatically ignore foreign language audio and subpictures, and DTS audio?

2. Go into Options, CCE options, Advanced (Expert) settings. What are your CCE customized settings?

EDIT

Another member had the same problem with oversized files. Read this thread

[Jah_Rankin]

1. Have you set DVD RB to automatically ignore foreign language audio and subpictures, and DTS audio?

2. Go into Options, CCE options, Advanced (Expert) settings. What are your CCE customized settings?

VBR Bias =35
VBRpass=2
Quality prec=16

[jyn999]

Read my previous posting

[Jah_Rankin]

I have a AMD processor should I check or uncheck (audio dub) I'm alittle confused from the info contained in the link above. What settings should i change?

[jyn999]

I have a AMD processor should I check or uncheck (audio dub) I'm alittle confused from the info contained in the link above. What settings should i change?

There was a problem with AMD processors and another setting similar to but not this setting. Just do what Bull did and you should be OK.

-=Bull=- wrote:
All i did was put the check mark under AVS options

Audiodub(blankClip())

That was it.

[Jah_Rankin]

I have a AMD processor should I check or uncheck (audio dub) I'm alittle confused from the info contained in the link above. What settings should i change?

There was a problem with AMD processors and another setting similar to but not this setting. Just do what Bull did and you should be OK.

-=Bull=- wrote:
All i did was put the check mark under AVS options

Audiodub(blankClip())

That was it.

I did that from before. Just sent u a PM when u get a chance

[jyn999]

I use a VBR_BIAS setting of 5 Quality_Prec of 16 with 5 passes.

Have you set DVD RB to automatically ignore foreign language audio and subpictures, and DTS audio?

I also turned on Dynamically Assign Cell Bitrates.

[Jah_Rankin]

I use a VBR_BIAS setting of 5 Quality_Prec of 16 with 5 passes.

Have you set DVD RB to automatically ignore foreign language audio and subpictures, and DTS audio?

I also turned on Dynamically Assign Cell Bitrates.

I did VBR=10, Prec=24, 4passes. Is this going to be a problem?

[jyn999]

I did VBR=10, Prec=24, 4passes. Is this going to be a problem?

I don't think so because these settings are only fine adjustments for CCE. BULL also changed his CCE settings to match mine but only got DVD RB to work when he

All i did was put the check mark under AVS options

Audiodub(blankClip())

That was it.

Did you retry DVD RB after you made BULL's change? I hope you weren't waiting for my reply.

[Jah_Rankin]

I'll find out how well it did with the new settings above when I return from work this evening, all the other settings is fine for now

[lacywest]

I'll find out how well it did with the new settings above when I return from work this evening, all the other settings is fine for now

Hello Jah_Rankin .... Did you get all the stuff I provided you??

I did another project with my setup ... this one was 2hr 15min .... worked just fine.

[Jah_Rankin]

I'll find out how well it did with the new settings above when I return from work this evening, all the other settings is fine for now

Hello Jah_Rankin .... Did you get all the stuff I provided you??

I did another project with my setup ... this one was 2hr 15min .... worked just fine.

I recieved the files, thanx a lot. Came home from work, After checking the recode I still end up with 10 gig recoded files.

[jyn999]

I recieved the files, thanx a lot. Came home from work, After checking the recode I still end up with 10 gig recoded files.

Look in the VIDEO_TS folder created by DVD RB. There should only be .IFO, .BUP, and .VOB files. If you have any other file types in the folder, delete them or move them to another folder, then recheck the total file size again.

[Jah_Rankin]

I recieved the files, thanx a lot. Came home from work, After checking the recode I still end up with 10 gig recoded files.

Look in the VIDEO_TS folder created by DVD RB. There should only be .IFO, .BUP, and .VOB files. If you have any other file types in the folder, delete them or move them to another folder, then recheck the total file size again.

There were some dvd navigation files in folder, how is this possible?

[jyn999]

I recieved the files, thanx a lot. Came home from work, After checking the recode I still end up with 10 gig recoded files.

Look in the VIDEO_TS folder created by DVD RB. There should only be .IFO, .BUP, and .VOB files. If you have any other file types in the folder, delete them or move them to another folder, then recheck the total file size again.

There were some dvd navigation files in folder, how is this possible?

What is the total size of the VIDEO_TS folder if you remove the extra files?

[lacywest]

Are you messing with all kinds of settings ???

I didn't mess with any settings ... I established where everything was located in the proper manner and hit the ... transcode button.

And it took over for me.

After 2 successful encodes ... I did a third one ... I did something different.

I told CCE ... to do 4 pass ... instead of 2 pass .... same results but even more better.

[Jah_Rankin]

I gave up. After 12 hrs of torcher to my pc and still no sucess I went a different route.

[lacywest]

I gave up. After 12 hrs of torcher to my pc and still no sucess I went a different route.

Over a month ago ... I too tried and gave up .... but .... when I had a 3 HR movie ... I was determined to figure it out ... and a new version came out.


I'm glad I didn't give up. Don't give .... up .... take a break ... it's worth it.

Your system is similar to mine .... you will figure it out.

Start over again .... erase the folders and extract them over again.

[Jah_Rankin]

I gave up. After 12 hrs of torcher to my pc and still no sucess I went a different route.

Over a month ago ... I too tried and gave up .... but .... when I had a 3 HR movie ... I was determined to figure it out ... and a new version came out.


I'm glad I didn't give up. Don't give .... up .... take a break ... it's worth it.

Your system is similar to mine .... you will figure it out.

Start over again .... erase the folders and extract them over again.

I've now dulged into the dual layer market and have great success so far with 3 of my burns, for the type of movies that requires long encoding, dual layer is the way for me, shorter movies conventional methods. Thanx for your assistance throughout.

[budz]

I've now dulged into the dual layer market and have great success so far with 3 of my burns, for the type of movies that requires long encoding, dual layer is the way for me, shorter movies conventional methods. Thanx for your assistance throughout.

you must have loads of cash to be using dual layer discs because it's still way too expensive for my wallet. too bad you gave it up because dvdrebuilder is one of the best free software to backup dvds. if you had followed the suggestions that were given to you perhaps it would have worked for you.

[Jah_Rankin]

I've now dulged into the dual layer market and have great success so far with 3 of my burns, for the type of movies that requires long encoding, dual layer is the way for me, shorter movies conventional methods. Thanx for your assistance throughout.

you must have loads of cash to be using dual layer discs because it's still way too expensive for my wallet. too bad you gave it up because dvdrebuilder is one of the best free software to backup dvds. if you had followed the suggestions that were given to you perhaps it would have worked for you.

I've tried 3 different dvd movies with no success, The same thing happen over and over, the files in video ts folder came out over 10 gig, I followed all the screenshots as well as settings from the guides and still blank. 12 hrs is a long time to guestamate a finish product status. the dual layer disc were 34.99 + tax for 3 disc@ bestbuy witha 30 return. I have done 6 back up so far 3 with decryptor, (of which 2 had problems with layer break) and the other 3 with copy to dvd, flawless so far.