VideoHelp Forum




+ Reply to Thread
Results 1 to 13 of 13
  1. 16th Oct 2004 00:02 #1
    Solarflair
    Solarflair is offline
    Member
    Join Date
    Apr 2004
    Location
    Minneapolis
    Search Comp PM
    Send a message via AIM to Solarflair
    I have an epson r200 printer which prints directly on inkjet printable media. however im having an issue here.

    I can print fine on normal inkjet printables but i bought these full faced ones which prints closer to the center than the standard type.

    There is a template for the standard but for the full faced, i have to specify a value in mm of the inner diameter. I have tried to google it for 40 minutes and cant find it. Can someone help me?
    Quote Quote  
  2. 16th Oct 2004 00:16 #2
    aanaravs
    aanaravs is offline
    Member aanaravs's Avatar
    Join Date
    Aug 2004
    Location
    New Jersey, USA
    Search Comp PM
    Send a message via AIM to aanaravs
    The inner diameter is 20 or 22 mm
    Quote Quote  
  3. 16th Oct 2004 00:24 #3
    Solarflair
    Solarflair is offline
    Member
    Join Date
    Apr 2004
    Location
    Minneapolis
    Search Comp PM
    Send a message via AIM to Solarflair
    Originally Posted by aanaravs
    The inner diameter is 20 or 22 mm
    Thank you so so much.
    Quote Quote  
  4. 16th Oct 2004 00:36 #4
    p_l
    p_l is offline
    Member p_l's Avatar
    Join Date
    Jun 2002
    Location
    Montreal, Canada
    Search Comp PM
    Quote Quote  
  5. 16th Oct 2004 03:12 #5
    iooi
    iooi is offline
    Member iooi's Avatar
    Join Date
    Jun 2003
    Location
    Yorks, UK
    Search Comp PM
    Originally Posted by Solarflair
    I have tried to google it for 40 minutes and cant find it. Can someone help me?
    Have you not got a ruler that you could have measured it with.....
    I know google is mans best friend but.....
    Not bothered by small problems...
    Spend a night alone with a mosquito
    Quote Quote  
  6. 16th Oct 2004 10:14 #6
    stiltman
    stiltman is offline
    Hello Ladies stiltman's Avatar
    Join Date
    Jul 2003
    Location
    Studio 54
    Search Comp PM
    Originally Posted by iooi
    Originally Posted by Solarflair
    I have tried to google it for 40 minutes and cant find it. Can someone help me?
    Have you not got a ruler that you could have measured it with.....
    I know google is mans best friend but.....

    Don't even imply that a ruler is mans best friend
    tgpo famous MAC commercial, You be the judge?
    Originally Posted by jagabo
    I use the FixEverythingThat'sWrongWithThisVideo() filter. Works perfectly every time.
    Quote Quote  
  7. 18th Oct 2004 09:27 #7
    RickTheRed
    RickTheRed is offline
    Member RickTheRed's Avatar
    Join Date
    Aug 2004
    Location
    Up north
    Search Comp PM
    Disks are different.
    There is no standard.
    I use 22mm and 118mm for hub printable (Prodisc +R).
    Other will use different settings for the same disk.

    My next order will be Ritek hub printable and I know I will have to change my settings again.
    Quote Quote  
  8. 19th Oct 2004 13:53 #8
    Annatar
    Annatar is offline
    Member
    Join Date
    Mar 2004
    Search Comp PM
    Originally Posted by p_l
    Which version is this? I dont have all of those options.
    Quote Quote  
  9. 19th Oct 2004 14:37 #9
    iooi
    iooi is offline
    Member iooi's Avatar
    Join Date
    Jun 2003
    Location
    Yorks, UK
    Search Comp PM
    Run 1.10E and i have all of them.
    Not bothered by small problems...
    Spend a night alone with a mosquito
    Quote Quote  
  10. 19th Oct 2004 14:59 #10
    p_l
    p_l is offline
    Member p_l's Avatar
    Join Date
    Jun 2002
    Location
    Montreal, Canada
    Search Comp PM
    Quote Quote  
  11. 19th Oct 2004 16:23 #11
    Annatar
    Annatar is offline
    Member
    Join Date
    Mar 2004
    Search Comp PM
    Ah ha! I was running 1.10A, thanks for that, i was unable to change the inner below 40mm and was contemplating buying discus 3, thats saved me a pretty penny.
    Quote Quote  
  12. 19th Oct 2004 16:37 #12
    stiltman
    stiltman is offline
    Hello Ladies stiltman's Avatar
    Join Date
    Jul 2003
    Location
    Studio 54
    Search Comp PM
    Originally Posted by Annatar
    Ah ha! I was running 1.10A, thanks for that, i was unable to change the inner below 40mm and was contemplating buying discus 3, thats saved me a pretty penny.
    You can change the inner diameter to anything you want via your registry. The software wont go below 20mm, but I have core hub labels that will go to 15mm. Copy and paste this to a text file and rename it to .reg extension. Then double click to merge. Start the software and it will now show the inner circle at 15mm

    The Dword is what you change. put a number into calc and convert to hex if you don't know by memory...F = 15


    Windows Registry Editor Version 5.00

    [HKEY_USERS\S-1-5-21-1409082233-1060284298-1417001333-500\Software\CORPUS\EPSON Print CD\Printings]
    "Bore"=dword:0000000f
    tgpo famous MAC commercial, You be the judge?
    Originally Posted by jagabo
    I use the FixEverythingThat'sWrongWithThisVideo() filter. Works perfectly every time.
    Quote Quote  
  13. 19th Oct 2004 17:49 #13
    p_l
    p_l is offline
    Member p_l's Avatar
    Join Date
    Jun 2002
    Location
    Montreal, Canada
    Search Comp PM
    For some reason, on the Epson America site you can get drivers, but not an updated version of the Epson Print CD software. The only place I've been able to find it is from their Russian site : http://support.epson.ru/upload/drivertypes/000781/printcd_14ae.zip

    How's your Cyrillic? It's from the bottom of this page.

    Choose the third one from the bottom if you want it in Russian, or the last one down if you want it in English. BTW, if someone who reads Russian could confirm this it'd be great, 'cause I'm pretty much just giving it an educated guess here.

    Quote Quote  



Similar Threads

« Previous Thread | Next Thread »
Visit our sponsor! Try DVDFab and backup Blu-rays!