Unshackle - Modular Movie, TV, and Music Archival Software

[tvdownloaderfan]

So I've installed unshackle, total newbie here. What do I do now to download as this doesn't work. Obviously I have blanked out the url

run unshackle dl https://xxxxxxxx/episode/xxxx/xxxxxxxxxxx

[iamghost]

uv run unshackle dl -w s01e01 itv https://xxxxxxxx/episode/xxxx/xxxxxxxxxxx

you must have all binaries and services to make it work

service:
https://forum.videohelp.com/threads/418705-Unshackle-Modular-Movie-TV-and-Music-Archiv...e9#post2782045

and also create new unshackle.yaml to add things

[tvdownloaderfan]

uv run unshackle dl -w s01e01 itv https://xxxxxxxx/episode/xxxx/xxxxxxxxxxx

you must have all binaries and services to make it work

service:
https://forum.videohelp.com/threads/418705-Unshackle-Modular-Movie-TV-and-Music-Archiv...e9#post2782045

and also create new unshackle.yaml to add things

I appear to have done this but nothing works. I've copied the SERVICES folder into unshakable-main, what is meant to be in unshackle.yaml ? You'll have to be a lot more clearer, no idea about any of this

[tvdownloaderfan]

Even though I've installed MKVToolNix it still shows I haven't ??


[Attachment 89418 - Click to enlarge]

[iamghost]

unshackle.yaml
https://forum.videohelp.com/threads/418705-Unshackle-Modular-Movie-TV-and-Music-Archiv...e2#post2779137

[Attachment 89419 - Click to enlarge]

go read from page 1 through 12, it everything have answer

[tvdownloaderfan]

Almost there but I can't get MKVToolNix installed


[Attachment 89423 - Click to enlarge]

[sipho]

Almost there but I can't get MKVToolNix installed


[Attachment 89423 - Click to enlarge]

Is that folder in your path (C:\Program Files\MKVToolNix)? Or alternatively put mkvmerge.exe in the binaries folder.

[tvdownloaderfan]

Almost there but I can't get MKVToolNix installed


[Attachment 89423 - Click to enlarge]

Is that folder in your path (C:\Program Files\MKVToolNix)? Or alternatively put mkvmerge.exe in the binaries folder.

Ok that worked but not sure my unshackle.yaml is as it should be ?

[sipho]

Ok that worked but not sure my unshackle.yaml is as it should be ?

If you use the unshackle-example.yaml and then save it as unshackle.yaml, the only critical sections are the CDM and Services. The rest are for you to tinker with. Use BBC as a test as it doesn't use the CDM and no authentication is required but you need to have the services folder with at a minimum, iP as the first service config.

[tvdownloaderfan]

Ok that worked but not sure my unshackle.yaml is as it should be ?

If you use the unshackle-example.yaml and then save it as unshackle.yaml, the only critical sections are the CDM and Services. The rest are for you to tinker with. Use BBC as a test as it doesn't use the CDM and no authentication is required but you need to have the services folder with at a minimum, iP as the first service config.

No idea what you mean. What and where do I add for BBC ITV STV ch4 and ch 5 ?


# Set terminal background color (custom option not in CONFIG.md)
set_terminal_bg: false

# Set file naming convention
# true for style - Prime.Suspect.S07E01.The.Final.Act.Part.One.1080p. ITV.WEB-DL.AAC2.0.H.264
# false for style - Prime Suspect S07E01 The Final Act - Part One
scene_naming: true

# Whether to include the year in series names for episodes and folders (default: true)
# true for style - Show Name (2023) S01E01 Episode Name
# false for style - Show Name S01E01 Episode Name
series_year: true

# Check for updates from GitHub repository on startup (default: true)
update_checks: true

# How often to check for updates, in hours (default: 24)
update_check_interval: 24

# Title caching configuration
# Cache title metadata to reduce redundant API calls
title_cache_enabled: true # Enable/disable title caching globally (default: true)
title_cache_time: 1800 # Cache duration in seconds (default: 1800 = 30 minutes)
title_cache_max_retention: 86400 # Maximum cache retention for fallback when API fails (default: 86400 = 24 hours)

# Muxing configuration
muxing:
set_title: false

# Login credentials for each Service
credentials:
# Direct credentials (no profile support)
EXAMPLE: email@example.comassword

# Per-profile credentials with default fallback
SERVICE_NAME:
default: default@email.comassword # Used when no -p/--profile is specified
profile1: user1@email.comassword1
profile2: user2@email.comassword2

# Per-profile credentials without default (requires -p/--profile)
SERVICE_NAME2:
john: john@example.com:johnspassword
jane: jane@example.com:janespassword

# You can also use list format for passwords with special characters
SERVICE_NAME3:
default: ["user@email.com", ":PasswordWith:Colons"]

# Override default directories used across unshackle
directories:
cache: Cache
cookies: Cookies
dcsl: DCSL # Device Certificate Status List
downloads: Downloads
logs: Logs
temp: Temp
wvds: WVDs
prds: PRDs
# Additional directories that can be configured:
# commands: Commands
services:
- /path/to/services
- /other/path/to/services
# vaults: Vaults
# fonts: Fonts

# Pre-define which Widevine or PlayReady device to use for each Service
cdm:
# Global default CDM device (fallback for all services/profiles)
default: WVD_1

# Direct service-specific CDM
DIFFERENT_EXAMPLE: PRD_1

# Per-profile CDM configuration
EXAMPLE:
john_sd: chromecdm_903_l3 # Profile 'john_sd' uses Chrome CDM L3
jane_uhd: nexus_5_l1 # Profile 'jane_uhd' uses Nexus 5 L1
default: generic_android_l3 # Default CDM for this service

# NEW: Quality-based CDM selection
# Use different CDMs based on video resolution
# Supports operators: >=, >, <=, <, or exact match
EXAMPLE_QUALITY:
"<=1080": generic_android_l3 # Use L3 for 1080p and below
">1080": nexus_5_l1 # Use L1 for above 1080p (1440p, 2160p)
default: generic_android_l3 # Optional: fallback if no quality match

# You can mix profiles and quality thresholds in the same service
NETFLIX:
# Profile-based selection (existing functionality)
john: netflix_l3_profile
jane: netflix_l1_profile
# Quality-based selection (new functionality)
"<=720": netflix_mobile_l3
"1080": netflix_standard_l3
">=1440": netflix_premium_l1
# Fallback
default: netflix_standard_l3

# Use pywidevine Serve-compliant Remote CDMs
remote_cdm:
- name: "chrome"
device_name: chrome
device_type: CHROME
system_id: 27175
security_level: 3
host: https://domain.com/api
secret: secret_key
- name: "chrome-2"
device_name: chrome
device_type: CHROME
system_id: 26830
security_level: 3
host: https://domain-2.com/api
secret: secret_key

- name: "decrypt_labs_chrome"
type: "decrypt_labs" # Required to identify as DecryptLabs CDM
device_name: "ChromeCDM" # Scheme identifier - must match exactly
device_type: CHROME
system_id: 4464 # Doesn't matter
security_level: 3
host: "https://keyxtractor.decryptlabs.com"
secret: "your_decrypt_labs_api_key_here" # Replace with your API key
- name: "decrypt_labs_l1"
type: "decrypt_labs"
device_name: "L1" # Scheme identifier - must match exactly
device_type: ANDROID
system_id: 4464
security_level: 1
host: "https://keyxtractor.decryptlabs.com"
secret: "your_decrypt_labs_api_key_here"

- name: "decrypt_labs_l2"
type: "decrypt_labs"
device_name: "L2" # Scheme identifier - must match exactly
device_type: ANDROID
system_id: 4464
security_level: 2
host: "https://keyxtractor.decryptlabs.com"
secret: "your_decrypt_labs_api_key_here"

- name: "decrypt_labs_playready_sl2"
type: "decrypt_labs"
device_name: "SL2" # Scheme identifier - must match exactly
device_type: PLAYREADY
system_id: 0
security_level: 2000
host: "https://keyxtractor.decryptlabs.com"
secret: "your_decrypt_labs_api_key_here"

- name: "decrypt_labs_playready_sl3"
type: "decrypt_labs"
device_name: "SL3" # Scheme identifier - must match exactly
device_type: PLAYREADY
system_id: 0
security_level: 3000
host: "https://keyxtractor.decryptlabs.com"
secret: "your_decrypt_labs_api_key_here"

# Key Vaults store your obtained Content Encryption Keys (CEKs)
# Use 'no_push: true' to prevent a vault from receiving pushed keys
# while still allowing it to provide keys when requested
key_vaults:
- type: SQLite
name: Local
path: key_store.db
# Additional vault types:
# - type: API
# name: "Remote Vault"
# uri: "https://key-vault.example.com"
# token: "secret_token"
# no_push: true # This vault will only provide keys, not receive them
# - type: MySQL
# name: "MySQL Vault"
# host: "127.0.0.1"
# port: 3306
# database: vault
# username: user
# password: pass
# no_push: false # Default behavior - vault both provides and receives keys

# Choose what software to use to download data
downloader: aria2c
# Options: requests | aria2c | curl_impersonate | n_m3u8dl_re
# Can also be a mapping:
# downloader:
# NF: requests
# AMZN: n_m3u8dl_re
# DSNP: n_m3u8dl_re
# default: requests

# aria2c downloader configuration
aria2c:
max_concurrent_downloads: 4
max_connection_per_server: 3
split: 5
file_allocation: falloc # none | prealloc | falloc | trunc

# N_m3u8DL-RE downloader configuration
n_m3u8dl_re:
thread_count: 16
ad_keyword: "advertisement"
use_proxy: true

# curl_impersonate downloader configuration
curl_impersonate:
browser: chrome120

# Pre-define default options and switches of the dl command
dl:
sub_format: srt
downloads: 4
workers: 16
lang:
- en
- fr
EXAMPLE:
bitrate: CBR

# Chapter Name to use when exporting a Chapter without a Name
chapter_fallback_name: "Chapter {j:02}"

# Case-Insensitive dictionary of headers for all Services
headers:
Accept-Language: "en-US,en;q=0.8"
User-Agent: "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/138.0.0.0 Safari/537.36"

# Override default filenames used across unshackle
filenames:
log: "unshackle_{name}_{time}.log"
config: "config.yaml"
root_config: "unshackle.yaml"
chapters: "Chapters_{title}_{random}.txt"
subtitle: "Subtitle_{id}_{language}.srt"

# API key for The Movie Database (TMDB)
tmdb_api_key: ""

# conversion_method:
# - auto (default): Smart routing - subby for WebVTT/SAMI, standard for others
# - subby: Always use subby with advanced processing
# - pycaption: Use only pycaption library (no SubtitleEdit, no subby)
# - subtitleedit: Prefer SubtitleEdit when available, fall back to pycaption
# - pysubs2: Use pysubs2 library (supports SRT/SSA/ASS/WebVTT/TTML/SAMI/MicroDVD/MPL2/TMP)
subtitle:
conversion_method: auto
sdh_method: auto

# Configuration for pywidevine's serve functionality
serve:
users:
secret_key_for_user:
devices:
- generic_nexus_4464_l3
username: user
# devices:
# - '/path/to/device.wvd'

# Configuration data for each Service
services:
# Service-specific configuration goes here
# Profile-specific configurations can be nested under service names

# Example: with profile-specific device configs
EXAMPLE:
# Global service config
api_key: "service_api_key"

# Service certificate for Widevine L1/L2 (base64 encoded)
# This certificate is automatically used when L1/L2 schemes are selected
# Services obtain this from their DRM provider or license server
certificate: |
CAUSwwUKvQIIAxIQ5US6QAvBDzfTtjb4tU/7QxiH8c+TBSKOAjCCAQoCggEBAObzvlu2hZRsapAPx4Aa4GUZj 4/GjxgXUtBH4THSkM40x63wQeyVxlEEo
# ... (full base64 certificate here)

# Profile-specific device configurations
profiles:
john_sd:
device:
app_name: "AIV"
device_model: "SHIELD Android TV"
jane_uhd:
device:
app_name: "AIV"
device_model: "Fire TV Stick 4K"

# Example: Service with different regions per profile
SERVICE_NAME:
profiles:
us_account:
region: "US"
api_endpoint: "https://api.us.service.com"
uk_account:
region: "GB"
api_endpoint: "https://api.uk.service.com"

# External proxy provider services
proxy_providers:
nordvpn:
username: username_from_service_credentials
password: password_from_service_credentials
server_map:
us: 12 # force US server #12 for US proxies
surfsharkvpn:
username: your_surfshark_service_username # Service credentials from https://my.surfshark.com/vpn/manual-setup/main/openvpn
password: your_surfshark_service_password # Service credentials (not your login password)
server_map:
us: 3844 # force US server #3844 for US proxies
gb: 2697 # force GB server #2697 for GB proxies
au: 4621 # force AU server #4621 for AU proxies
basic:
GB:
- "socks5://usernameassword@bhx.socks.ipvanish.com:1080" # 1 (Birmingham)
- "socks5://usernameassword@gla.socks.ipvanish.com:1080" # 2 (Glasgow)
AU:
- "socks5://usernameassword@syd.socks.ipvanish.com:1080" # 1 (Sydney)
- "https://usernameassword@au-syd.prod.surfshark.com" # 2 (Sydney)
- "https://usernameassword@au-bne.prod.surfshark.com" # 3 (Brisbane)
BG: "https://usernameassword@bg-sof.prod.surfshark.com"

[TGreatOne]

Hello to all.

I keep getting a "shaka-packager has stopped working" message after Unshackled finishes downloading both the video and audio for some reason (together and separately), downloading the subs alone work fine though. Has anyone else faced that issue?

I'm using the latest version of shaka-packager atm, which is the v3.4.2.

Any help would be greatly appreciated

I swapped out the version of shaka-packager to v2.6.1 from, as suggested by this Github page (https://github.com/stabbedbybrick/services). The previous error message is now gone, but now it has been replaced by the following one.

╭───────────────────── Traceback (most recent call last) ──────────────────────╮
│ C:\Windows\System32\unshackle\unshackle\commands\d l.py:1009 in result │
│ │
│ 1006 │ │ │ │ │ │ │ │ for i, track in enumerate(title.track │
│ 1007 │ │ │ │ │ │ │ ) │
│ 1008 │ │ │ │ │ │ ): │
│ ❱ 1009 │ │ │ │ │ │ │ download.result() │
│ 1010 │ │ │ except KeyboardInterrupt: │
│ 1011 │ │ │ │ console.print(Padding(": Download Cancelled...", (0 │
│ 1012 │ │ │ │ return │
│ │
│ C:\Users\dasilva\AppData\Roaming\uv\python\cpython-3.12.12-windows-x86_64-no │
│ ne\Lib\concurrent\futures\_base.py:449 in result │
│ │
│ 446 │ │ │ │ if self._state in [CANCELLED, CANCELLED_AND_NOTIFIED]: │
│ 447 │ │ │ │ │ raise CancelledError() │
│ 448 │ │ │ │ elif self._state == FINISHED: │
│ ❱ 449 │ │ │ │ │ return self.__get_result() │
│ 450 │ │ │ │ │
│ 451 │ │ │ │ self._condition.wait(timeout) │
│ 452 │
│ │
│ C:\Users\dasilva\AppData\Roaming\uv\python\cpython-3.12.12-windows-x86_64-no │
│ ne\Lib\concurrent\futures\_base.py:401 in __get_result │
│ │
│ 398 │ def __get_result(self): │
│ 399 │ │ if self._exception: │
│ 400 │ │ │ try: │
│ ❱ 401 │ │ │ │ raise self._exception │
│ 402 │ │ │ finally: │
│ 403 │ │ │ │ # Break a reference cycle with the exception in self._ │
│ 404 │ │ │ │ self = None │
│ │
│ C:\Users\dasilva\AppData\Roaming\uv\python\cpython-3.12.12-windows-x86_64-no │
│ ne\Lib\concurrent\futures\thread.py:59 in run │
│ │
│ 56 │ │ │ return │
│ 57 │ │ │
│ 58 │ │ try: │
│ ❱ 59 │ │ │ result = self.fn(*self.args, **self.kwargs) │
│ 60 │ │ except BaseException as exc: │
│ 61 │ │ │ self.future.set_exception(exc) │
│ 62 │ │ │ # Break a reference cycle with the exception 'exc' │
│ │
│ C:\Windows\System32\unshackle\unshackle\core\track s\track.py:249 in download │
│ │
│ 246 │ │ │ │ │ cdm=cdm, │
│ 247 │ │ │ │ ) │
│ 248 │ │ │ elif self.descriptor == self.Descriptor.DASH: │
│ ❱ 249 │ │ │ │ DASH.download_track( │
│ 250 │ │ │ │ │ track=self, │
│ 251 │ │ │ │ │ save_path=save_path, │
│ 252 │ │ │ │ │ save_dir=save_dir, │
│ │
│ C:\Windows\System32\unshackle\unshackle\core\manif ests\dash.py:564 in │
│ download_track │
│ │
│ 561 │ │ │
│ 562 │ │ if drm: │
│ 563 │ │ │ progress(downloaded="Decrypting", completed=0, total=100) │
│ ❱ 564 │ │ │ drm.decrypt(save_path) │
│ 565 │ │ │ track.drm = None │
│ 566 │ │ │ events.emit(events.Types.TRACK_DECRYPTED, track=track, drm │
│ 567 │ │ │ progress(downloaded="Decrypting", advance=100) │
│ │
│ C:\Windows\System32\unshackle\unshackle\core\drm\w idevine.py:267 in decrypt │
│ │
│ 264 │ │ if decrypter == "mp4decrypt": │
│ 265 │ │ │ return self._decrypt_with_mp4decrypt(path) │
│ 266 │ │ else: │
│ ❱ 267 │ │ │ return self._decrypt_with_shaka_packager(path) │
│ 268 │ │
│ 269 │ def _decrypt_with_mp4decrypt(self, path: Path) -> None: │
│ 270 │ │ """Decrypt using mp4decrypt""" │
│ │
│ C:\Windows\System32\unshackle\unshackle\core\drm\w idevine.py:374 in │
│ _decrypt_with_shaka_packager │
│ │
│ 371 │ │ │ p.wait() │
│ 372 │ │ │ │
│ 373 │ │ │ if p.returncode != 0 or had_error: │
│ ❱ 374 │ │ │ │ raise subprocess.CalledProcessError(p.returncode, argu │
│ 375 │ │ │ │
│ 376 │ │ │ path.unlink() │
│ 377 │ │ │ if not stream_skipped: │
╰───────────────────────────────────────────────── ─────────────────────────────╯
CalledProcessError: Command
'['input=E:\\Unshackle\\Temp\\Audio_f9bc085b.mp4,str eam=0,output=E:\\Unshackle\\
Temp\\Audio_f9bc085b_decrypted.mp4,output_format=M P4',
'--enable_raw_key_decryption', '--keys',
'label=0:key_id=00000000000000000000000004122381:k ey=c42487fc7bb540c70d2c7f691f8
578a8,label=1:key_id=00000000000000000000000000000 000:key=c42487fc7bb540c70d2c7f
691f8578a8', '--temp_dir', WindowsPath('E:/Unshackle/Temp')]' returned non-zero
exit status 1.

❌ Download Failed...
An unexpected error occurred in one of the download workers.
Binary call failed, Process exit code: 1
See the error trace above for more information.

I looked through the thread and couldn't find the same error. Suggestions are welcome

Edit: After looking in the older Devine thread, I saw someone suggest v3.2.0 around a year ago, that finally one fixed the issue. All of the shaka-packager versions that came out afterwards crash for some reason.

[sipho]

]

No idea what you mean. What and where do I add for BBC ITV STV ch4 and ch 5 ?

unshackle requires the services to be installed or else it won't download anything.

Look here.

[tvdownloaderfan]

]

No idea what you mean. What and where do I add for BBC ITV STV ch4 and ch 5 ?

unshackle requires the services to be installed or else it won't download anything.

Look here.

I thought I already have them ?
Hoe do I install them ? What does it mean Add folder to devine.yaml or unshackle.yaml


[Attachment 89437 - Click to enlarge]


[Attachment 89438 - Click to enlarge]

[tvdownloaderfan]

If someone can please answer me thanks. I don't get how you can add a folder to file like unshackle.yaml, makes no sense

[Tom Saurus]

If someone can please answer me thanks. I don't get how you can add a folder to file like unshackle.yaml, makes no sense

So you have a folder in Unshackle called Services. You right click that folder and select "copy as path". The you go to your .yaml file and look for this line:


# Override default directories used across unshackle
directories:
services: C:\unshackle\services

Whatever your path is you put a space after services: and paste that path and you save it. Do the same for the cache and cookie folder. I hope that helps. It has been a while since I set up Unshackle so I am a bit fuzzy and I tend to forget. I hope you continue to get the help you need to get Unshackle set up and working. It is a terrific program and I am grateful for it.

[tvdownloaderfan]

If someone can please answer me thanks. I don't get how you can add a folder to file like unshackle.yaml, makes no sense

So you have a folder in Unshackle called Services. You right click that folder and select "copy as path". The you go to your .yaml file and look for this line:


# Override default directories used across unshackle
directories:
services: C:\unshackle\services

Whatever your path is you put a space after services: and paste that path and you save it. Do the same for the cache and cookie folder. I hope that helps. It has been a while since I set up Unshackle so I am a bit fuzzy and I tend to forget. I hope you continue to get the help you need to get Unshackle set up and working. It is a terrific program and I am grateful for it.

I don't have any cookie folder ? But is this right ?

# Override default directories used across unshackle
directories:
C:\unshackle\unshackle-main\unshackle\services
cache: Cache
C:\unshackle\unshackle-main\unshackle\cache\update_check.json
cookies: Cookies

[deccavox]

In my main .\unshackle folder I have folders: 'cache', 'certs', 'cookies, 'Downloads' and created automatically when run 'logs', 'temp'
In the .\unshackle\unshackle folder I have 'binaries, 'PRDs', 'WVDs'
'cookies' I only need for DSCP channel.

All the rest as per github download.

In my 'unshackle.yaml' I used relative paths. That means I can set up my unshackle on any directory or subdirectory on any HDD on my system. Hence the paths start with '.\' You too can use that for your C:\ drive

So, the relevant bits of it:

# Group or Username to postfix to the end of all download filenames following a dash
tag: TVC

# Set terminal background color (custom option not in CONFIG.md)
set_terminal_bg: false

# Set file naming convention
#  true for style - Prime.Suspect.S07E01.The.Final.Act.Part.One.1080p.ITV.WEB-DL.AAC2.0.H.264
#  false for style - Prime Suspect S07E01 The Final Act - Part One
scene_naming: true

# Whether to include the year in series names for episodes and folders (default: true)
#  true for style - Show Name (2023) S01E01 Episode Name
#  false for style - Show Name S01E01 Episode Name
series_year: true

# Check for updates from GitHub repository on startup (default: true)
update_checks: false

# How often to check for updates, in hours (default: 24)
update_check_interval: 24

# Muxing configuration
muxing:
  set_title: false

# Login credentials for each Service
credentials: 
  ALL4: me@hotmail.com:buggeroff
  DSCP: me@hotmail.com:buggeroff
  TVNZ: me@hotmail.com:buggeroff
#  ROKU: email:password

# Override default directories used across unshackle
directories:
  services: .\unshackle\services
  cache: .\cache
  cookies: .\cookies
#  dcsl: DCSL # Device Certificate Status List
  downloads: .\Downloads
  logs: .\Logs
  temp: .\temp
  WVDs: .\unshackle\WVDs
  PRDs: .\unshackle\PRDs
  # Additional directories that can be configured:
  # commands: Commands
  # vaults: Vaults
  # fonts: Fonts

# Pre-define which Widevine or PlayReady device to use for each Service
cdm:
  DSCP: mine
  default: ANDROID_mine

# Configuration data for each Service
services:
  iP:
    cert: .\certs\bbciplayer.pem

# Use pywidevine Serve-compliant Remote CDMs
remote_cdm:
  - name: "chrome"
    device_name: chrome
    device_type: CHROME
    system_id: 27175
    security_level: 3
    host: https://domain.com/api
    secret: secret_key
  - name: "chrome-2"
    device_name: chrome
    device_type: CHROME
    system_id: 26830
    security_level: 3
    host: https://domain-2.com/api
    secret: secret_key

# Key Vaults store your obtained Content Encryption Keys (CEKs)
key_vaults:
key_vaults:
  - type: SQLite
    name: Local
    path: key_store.db
  # Additional vault types:
  # - type: API
  #   name: "Remote Vault"
  #   uri: "https://key-vault.example.com"
  #   token: "secret_token"
  # - type: MySQL
  #   name: "MySQL Vault"
  #   host: "127.0.0.1"
  #   port: 3306
  #   database: vault
  #   username: user
  #   password: pass

# Choose what software to use to download data
downloader: aria2c
# Options: requests | aria2c | curl_impersonate | n_m3u8dl_re
# Can also be a mapping:
downloader:
  DSCP: n_m3u8dl_re
  # ALL4: n_m3u8dl_re
#   NF: requests
#   AMZN: n_m3u8dl_re
#   DSNP: n_m3u8dl_re
#   default: requests

# aria2c downloader configuration
aria2c:
  max_concurrent_downloads: 4
  max_connection_per_server: 3
  split: 5
  file_allocation: falloc # none | prealloc | falloc | trunc

# N_m3u8DL-RE downloader configuration
n_m3u8dl_re:
  thread_count: 16
  ad_keyword: "advertisement"
  use_proxy: true

[iamghost]

I don't have any cookie folder ? But is this right ?

# Override default directories used across unshackle
directories:
C:\unshackle\unshackle-main\unshackle\services
cache: Cache
C:\unshackle\unshackle-main\unshackle\cache\update_check.json
cookies: Cookies

no, this one...
need add folder like that
open 1st unshackle folder, add all folders apart services folder. add services folder under 2nd unshackle folder

[Attachment 89474 - Click to enlarge]

[Attachment 89475 - Click to enlarge]
your unshackle.yaml like...

directories:
  services: ./unshackle/services
  cache: ./Cache
  cookies: ./Cookies
  downloads: ./Downloads
  logs: ./Logs
  temp: ./Temp
  wvds: ./WVDs
  prds: ./PRDs

[tvdownloaderfan]

Can someone help please get this working, so confusing to me. PM etc thanks. Is this right ? No idea what I am doing


[Attachment 89476 - Click to enlarge]

[tvdownloaderfan]

I don't have any cookie folder ? But is this right ?

# Override default directories used across unshackle
directories:
C:\unshackle\unshackle-main\unshackle\services
cache: Cache
C:\unshackle\unshackle-main\unshackle\cache\update_check.json
cookies: Cookies

no, this one...
need add folder like that
open 1st unshackle folder, add all folders apart services folder. add services folder under 2nd unshackle folder

[Attachment 89474 - Click to enlarge]

[Attachment 89475 - Click to enlarge]
your unshackle.yaml like...

directories:
  services: ./unshackle/services
  cache: ./Cache
  cookies: ./Cookies
  downloads: ./Downloads
  logs: ./Logs
  temp: ./Temp
  wvds: ./WVDs
  prds: ./PRDs

This is ALL I put in unshackle.yaml ??

[A_n_g_e_l_a]

Here is a generic unshackle/envied yaml. Envied has DRMLabs Vault for access to keys already found by users but unshackle users will not be able to make use of that - so I've commented a section out.

Envied comes complete with a very similar working yaml and users just need to rename it from envied-workiing-example.yaml to envied.yaml and then the whole kit and caboodle just works. Services are installed and set-up at installation. A cdm is installed..

Unshackle users taking this yaml will need to set the CDM location to something other than 'device' . Unshackle needs your CDM

https://github.com/vinefeeder/envied for an easier unshackle install
https://github.com/vinefeeder/TwinVine for envied and VineFeeder as a single install.

# Group or Username to postfix to the end of all download fienames following a dash
#tag: ''

# Set terminal background color (custom option not in CONFIG.md)
set_terminal_bg: false

# Muxing configuration
muxing:
  set_title: false

# shakapackager or mp4decrypt
decryption: mp4decrypt

scene_naming: false
series_year: false

# Widevine pssh display; fold, crop or ellipsis
# not available in unshackle
# pssh_display: ellipsis

# Login credentials for each Service
credentials:
  ALL4: email:password
  ROKU: email:password
  TVNZ: email:password
  TPTV: email:password
  CBC: email:password
# Override default directories used across envied
directories:
  cache: Cache
  cookies: Cookies
  dcsl: DCSL # Device Certificate Status List
  downloads: Downloads
  logs: Logs
  temp: Temp
  wvds: WVDs
  prds: PRDs
  # Additional directories that can be configured:
  # commands: Commands
  services:
    - ./unshackle/services/
  vaults: vaults/
  # fonts: Fonts

# Pre-define which Widevine or PlayReady device to use for each Serviceuv run envied
cdm:
  default: device


# Key Vaults store your obtained Content Encryption Keys (CEKs)
key_vaults:
- type: SQLite
  name: Local vault
  path: key_store.db

# - type: HTTPAPI
#   name: drmlab
#   host: http://api.drmlab.io/vault/
#   password: gEX75q7I5YVkvgF5SUkcNd41IbGrDtTT
#- type: API
#  name: CDRM Vault
#  uri: https://cdrm-project.com/api/cache
#  token: CDRM


# Choose what software to use to download data
downloader: aria2c # Caution: n_m3u8dl_re has issues on Windows
# Options: requests | aria2c | curl_impersonate | n_m3u8dl_re
# Can also be a mapping:
# downloader:
#   NF: requests
#   AMZN: n_m3u8dl_re
#   DSNP: n_m3u8dl_re
#   default: requests

# aria2c downloader configuration
aria2c:
  max_concurrent_downloads: 4
  max_connection_per_server: 3
  split: 5
  file_allocation: falloc # none | prealloc | falloc | trunc

# N_m3u8DL-RE downloader configuration
n_m3u8dl_re:
  thread_count: 16
  ad_keyword: "advertisement"
  use_proxy: true

# curl_impersonate downloader configuration
curl_impersonate:
  browser: chrome120

# Pre-define default options and switches of the dl command
dl:
  best: true
  sub_format: srt
  downloads: 4
  workers: 16

# Chapter Name to use when exporting a Chapter without a Name
chapter_fallback_name: "Chapter {j:02}"

# Case-Insensitive dictionary of headers for all Services
headers:
  Accept-Language: "en-US,en;q=0.8"
  User-Agent: "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/77.0.3865.75 Safari/537.36"

# Override default filenames used across envied
filenames:
  log: "envied_{name}_{time}.log"
  config: "config.yaml"
  root_config: "envied.yaml"
  chapters: "Chapters_{title}_{random}.txt"
  subtitle: "Subtitle_{id}_{language}.srt"

# API key for The Movie Database (TMDB)
tmdb_api_key: ""

# conversion_method:
# - auto (default): Smart routing - subby for WebVTT/SAMI, standard for others
# - subby: Always use subby with advanced processing
# - pycaption: Use only pycaption library (no SubtitleEdit, no subby)
# - subtitleedit: Prefer SubtitleEdit when available, fall back to pycaption
subtitle:
  conversion_method: auto
  sdh_method: auto


# Configuration data for each Service
services:
  # Service-specific configuration goes here
  # EXAMPLE:
  #   api_key: "service_specific_key"

# Legacy NordVPN configuration (use proxy_providers instead)
#proxy_providers:
#  nordvpn:
#    username: username
#    password: password
#    server_map:
#     us: 6918
#     uk: 2613
#     nz: 100