dvd decryptor prob

[winny22]

hi im trying to convert a movie it is layer 2 so i can convert on dvd2one..
ok the problem is when i get too 52% on dvd decryptor i get a(unrecovered read error) ( abort retry ignore) i keep retrying but still get the same error.. any advice what to do, ive cleaned the disc and ive tried 3 times, and get the error at the same point every time 52% do i just ignore and try and complete and what r the chances of it being a coaster thanxs

[instigator_008]

Sounds like you have a scratch or other imperfection. You can choose to ignore the error which may result in viewing problems with your disc. It may be as minor as a simple skip. Once you've ripped the disc, watch it with PowerDVD (or equivalant) to see if it is worth burning.

[VicodiN]

Do you have two DVD read drives? If so, try to rip the DVD in the other drive... Ive had a similar problem in the past, and the fix was that simple.

[winny22]

this is what the lod file says

I 19:31:46 DVD Decrypter Version 3.1.9.0 started!
I 19:31:46 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1)
W 19:31:46 Drive C:\ (FAT32) does not support files > 4 GB
I 19:31:46 Initialising SPTI...
I 19:31:46 Searching for SCSI / ATAPI devices...
I 19:31:46 Found 1 CD-RW, 2 DVD-ROMs and 1 DVD±RW!
I 19:41:19 Operation Started!
I 19:41:19 Source Device: [1:0:0] LITE-ON DVDRW LDW-811S HS06 (D
I 19:41:19 Destination Folder: C:\Documents and Settings\paul\Desktop\gony\
I 19:41:19 Detect Mastering Errors: No
I 19:41:19 Fast Error Skip: No
I 19:41:19 File Splitting: By File
I 19:41:19 Multi Angle Processing: No
I 19:41:19 Remove Macrovision Protection: Yes
I 19:41:19 Stream Processing: No
I 19:41:19 Copying VIDEO_TS.BUP... (LBA: 31492 - 31497) - KEY: N/A
I 19:41:21 Copying VIDEO_TS.IFO... (LBA: 309 - 314) - KEY: N/A
I 19:41:24 Copying VIDEO_TS.VOB... (LBA: 315 - 31475) - KEY: N/A
I 19:41:39 Copying VTS_01_0.BUP... (LBA: 3915407 - 3915440) - KEY: N/A
I 19:41:47 Copying VTS_01_0.IFO... (LBA: 31498 - 31531) - KEY: N/A
I 19:41:47 Decrypting VTS_01_0.VOB... (LBA: 31532 - 127922) - KEY: CB 0C 0A B0 00
I 19:42:35 Decrypting VTS_01_1.VOB... (LBA: 127923 - 652194) - KEY: CB 0C 0A B0 00
I 19:45:18 Decrypting VTS_01_2.VOB... (LBA: 652195 - 1176466) - KEY: CB 0C 0A B0 00
I 19:47:24 Decrypting VTS_01_3.VOB... (LBA: 1176467 - 1700738) - KEY: CB 0C 0A B0 00
I 19:49:11 Decrypting VTS_01_4.VOB... (LBA: 1700739 - 2225010) - KEY: CB 0C 0A B0 00
W 19:51:47 Failed to read Sector 2076400 - Unrecovered Read Error
W 19:51:47 Skipping Sector 375661 - Pack Header Not Found

[winny22]

ok just done a different dvd and this worked fine the 1st must be scratched but it looks like a mirror ?????? any comments would be welcome thanxs again

[Bodene]

Clean the source disc. Even if it is brand new out of the package, it could have a microscopic bit of crud on it, preventing the read. Recently I had to clean American Wedding 4 times (right out of the package) before it'd rip.

[winny22]

ive cleaned it with a lint cloth are there any solutions as to clean discs thanxs

[jeex]

ok just done a different dvd and this worked fine the 1st must be scratched but it looks like a mirror ?????? any comments would be welcome thanxs again

i think vicodin was saying to try ripping the disc in another dvd-rom/rw drive.

[Bricktop]

If you can, try and rip it in your writer as opposed to your ROM drive.
I always get a more reliable read from my writer when the disc is not in pristine condition.

[winny22]

i only have one dvd drive LITE-ON DVDRW LDW-811S [CD-ROM drive]

and one cd writer drive LITE-ON LTR-24102B [CD-ROM drive]

[winny22]

flashed the firmware that worked it reads it all now and no burn errors either