I have a JVC camcorder (GR-D29OU) which has a memory card slot to take still pictures. Having 8 MB and 16 MB Multimedia Cards(CU-MMC8U and 16U) take 25 and 50 jpeg pictures - no problem, they can be copied off with my Sony cardreader.
To have a larger capacity I obtained a MMCPlus 4 GB Transcend card. To start it in the camcorder I had to Format it, than I took pictures. The first 13 pix were OK and transferable, but anything after them became garbled - could be seen on the LCD monitor - to transfer a message said:"Files are corrupted.". In many trials, always the first 13 pix are ok, the rest bad.
It might be that this subject is not for this forum, but someone might have a similar experience. Thank you for your interest.
+ Reply to Thread
Results 1 to 2 of 2
-
-
mmc plus is not quite the same as old mmc cards. from wikipedia -
Version 4.x full-size cards and reduced-size cards can be marketed as MMCplus and MMCmobile respectively.
Version 4.x cards are fully backward compatible with existing readers but require updated hardware/software to use their new capabilities; even though the four-bit-wide bus and high-speed modes of operation are deliberately electrically compatible with SD, the initialization protocol is different, so firmware/software updates are required to support these features in an SD reader.--
"a lot of people are better dead" - prisoner KSC2-303
Similar Threads
-
Does anyone know how to get a Panasonic P2 card working on Windows?
By Emanef in forum Newbie / General discussionsReplies: 6Last Post: 19th Aug 2010, 09:25 -
winfast palmtop TV external card - the schedule not working
By 3l8x in forum Newbie / General discussionsReplies: 4Last Post: 23rd Oct 2008, 15:14 -
AC3 on m4v not working, 48KHz AAC not working, 44.1KHz does?!?!
By dmjerbear in forum AudioReplies: 14Last Post: 11th May 2008, 18:23 -
Angel Dual Tuner Card Not Working: Hardware is Malfunctioning or Not Insta
By nicolasqueen in forum Media Center PC / MediaCentersReplies: 0Last Post: 25th Nov 2007, 23:49 -
4 port capture card - avermedia lx5004 - not working correctly
By 4dplane in forum Capturing and VCRReplies: 3Last Post: 21st Nov 2007, 20:39