VideoHelp Forum




+ Reply to Thread
Results 1 to 6 of 6
  1. Member
    Join Date
    Sep 2005
    Location
    LOST in the USA
    Search Comp PM
    I intend to split the cable signal so that I can record a program and watch another on HDTV. One will be connected to a DVD recorder and the other to a cable box (HD). Will there be a noticeable degrading of signal quality? Thanks.
    Quote Quote  
  2. Banned
    Join Date
    Feb 2005
    Location
    USA
    Search Comp PM
    As long as it's done properly there will be no noticeable loss of signal.
    Quote Quote  
  3. Aging Slowly Bodyslide's Avatar
    Join Date
    Feb 2002
    Location
    A Different Timeline
    Search Comp PM
    Make sure you get a High Quality Splitter and not one of the cheap ones. Good Quality ones are around 7.00- 10.00 US.
    You want at least a 1GHz splitter. 900MHz usually work as well (unless your cable company actually goes above a gig, which I seriously doubt). The 1GHz means that the splitter is designed to pass signals all the way up to 1GHz.
    Quote Quote  
  4. Member
    Join Date
    Sep 2005
    Location
    LOST in the USA
    Search Comp PM
    Thanks, guys. I have a couple of splitters in the garage that I can try. We also have cable connections in the two bedrooms. I wonder how the cable guys did it to minimize signal loss.
    Quote Quote  
  5. Member
    Join Date
    Feb 2003
    Location
    United States
    Search Comp PM
    if you do start having problems, I would suggest installing a signal booster instead of the splitter. Installing a splitter in my setup made my HD channels inaccessible by my cable box. Installing a signal booster also made significant improvement to the signal that went to my dvd recorder. Basic rule i've found - if basic cable looks better when tuned thru the cable box, then tuned thru the split, basic-cable signal, you should be able to improve the basic signal with a booster.

    Also, not sure how much of your setup is done, but if you haven't already, I would suggest running an s-video cable from your cable box to an alternate input on the dvd-recorder (plus sound) - that way you can record digital cable channels that aren't acecssible from the dvd-recorders tuner (if you have them). Also with HD channels, I've noticed that HD channels sent via s-video directly to a dvd-recorder look phenomenal! (yes, even recorded on a non-hd media) - try it if you haven't!
    Quote Quote  
  6. Member
    Join Date
    Sep 2005
    Location
    LOST in the USA
    Search Comp PM
    I have the LiteOn 1101 DVD recorder which does not have S-video interface. The composite connection (RCA) looks good also. I'll try a signal booster if it gives me problem when split. Thanks.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!