Error with DVD Decrypter and NERO!

10th Oct 2005 06:51 #1

Member

Hi,
Thought I'd post this in here. I was burning a DVD yesterday with DVD Decrypter and it was working fine, then, I went to burn another DVD, and I recieved the following I/O Error.

I/O Error!

Device: [2:0:0] HL-DT-ST DVDRAM GMA-4020B (D: ) (ATA)

ScsiStatus 0x02
Interpretation: Check Condition

CDB: 2A 00 00 00 04 20 00 00 20 00
Interpretation: Write (10) - Sectors: 1056 - 1087

Sense Area: 70 00 02 00 00 00 00 0A 00 00 00 00 30 05 00 00 00 00
Interpretation: Cannot Write Medium - Incompatible Format

I then tried burning a DVD with NERO and I recieved the following error message.

Track following error
Track following error
Could not perform end of Disc-at-once
Burn process failed at 2x (2,770 KB/s)

Here is the full log from NERO.

Ali Khan
None
1A23-XXXX-XXXX-XXXX-XXXX-XXXX

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GMA-4020B>Version: A105 - HA 3 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 3
Drive buffer : 1312kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GMA-4020B>Version: A105 - HA 3 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-53EVA0 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4020B atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4020 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 93MB (95844kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2005
UDF/ISO compilation
7:23:24 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

7:23:24 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

7:23:24 AM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:23:24 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

7:23:24 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

7:23:24 AM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GMA-4020B running

7:23:24 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:23:24 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:23:24 AM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

7:23:24 AM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2276911 (505:58.61, 4447MB)

7:23:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

7:23:24 AM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GMA-4020B, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

7:23:24 AM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:23:24 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2276912 (2276912) = #2276912/505:58.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2276912 blocks [HL-DT-ST DVDRAM GMA-4020B]
--------------------------------------------------------------

7:23:24 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GMA-4020B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4663115776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2276912 | lead-out | 1 | 0x41 | 0x00

7:23:24 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:23:24 AM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

7:23:24 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:23:24 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

7:23:24 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:23:24 AM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

7:23:24 AM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

7:23:24 AM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

7:23:24 AM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:23:58 AM #25 Text 0 File Cdrdrv.cpp, Line 1287
07:23:58.718 - HL-DT-ST DVDRAM GMA-4020B\H3 T0 : Queue again later

7:24:48 AM #26 SCSI -1119 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x10 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x27 0x04 0x0C 0x09 0x00

7:24:48 AM #27 CDR -1119 File Writer.cpp, Line 311
Track following error

7:24:48 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:24:48 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:24:49 AM #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 4319

7:24:49 AM #31 CDR -1119 File WriterStatus.cpp, Line 167
Track following error

7:24:49 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

7:24:49 AM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:09 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

After wasting like 3-4 DVD-R's, I contacted Gateway support and they told me to try a different brand of DVD-R's, then if it doesn't work, let them know so they can send me a new DVD drive.

I use Ridata (Ritek) branded DVD-R's and they have been working fine for the past few months now without any problems. This just happened yesterday. I searched around but couldn't find any information on how to fix this. Also, here is the info from NERO about my DVDRAM.

Nero InfoTool 3.00

Drive Information
------------------
Drive : HL-DT-ST DVDRAM GMA-4020B
Type : DVD-RAM Recorder
Firmware Version : A105
Buffer Size : 1312 KB
Date : ?
Serial Number
Vendor Specific :
Drive Letter : D:\
Location : 3:0
Mechanism : Tray
Read Speed : 32 X
Write Speed : 12 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : Yes
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : No
Read DVD+RW : No
Read DVD+R DL : No
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : No
Write DVD+R : No
Write DVD+RW : No
Write DVD+R DL : No
Write DVD-RAM : Yes
Write BD-R : No
Write BD-RE : No
Buffer Underrun Protection : Yes
Mount Rainier : No

Any help would be appreciated . I will try the different media and let you know what happens. Also, an important point.

THE DVDRAM CAN STILL BURN CD's WITHOUT A PROBLEM

Sorry for the bold and caps but some people might miss it. Once again, I appreciated the help .

LiVe iS juSt EvIl SpElLed BAcKwArDS!

Quote

10th Oct 2005 10:09 #2

jtoolman2000

Member

DVD Laser may be shot sInce it still burns CDs.They die wothout the least hint. I also have a gateway that came with a DVD/Ram drive. The same exact thing happened to me. Replaced with $70 NEC 3500 from Newegg and been happily burning backups since then.