Hi,
I often get the message
autopadding requires to insert additional xxx zero bytes into MPEG-stream (due to xxx unaligned packets of xxx+1)
This happens allmost every time I used DVDx 1.8a to make a backup-copy of my DVDs.
Of course those files are to large afterwards to burn them on a 74 or 80min empty CD properly.
I allready tried to mux them again using TMPG but that doesn´t fix the problem.
Does anyone have "the hint" for me?
Thx,
petjek
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays!
Results 1 to 4 of 4
Thread
-
-
I have been having a similar problem in trying to use TMPGEnc with a CVD template. A quick test seemed to point towards the issue being with the System Stream Setting. When I had it set to Super VideoCD (VBR) it was fine. When I had it set to MPEG-2 Program (VBR) it was getting padded by VCDEasy.
Doug
-
Normally you get this if the mpeg you're using is not a proper VCD/SVCD file. If it's multiplexed as an ordinary MPEG stream, that's wrong. If it's an XVCD multiplexed as a standard VCD, that's wrong too (it needs to be specifically set to non-standard VCD). CVD should be multiplexed as SVCD.
I'm not familiar with DVDx (I've never used it) and you haven't specified what you're creating when you get that error, so I can't offer any more specific suggestions.
Similar Threads
-
Write bytes to a video to apply just a range of pixels
By jairovital in forum EditingReplies: 3Last Post: 1st Sep 2010, 08:57 -
says it succeeded but file is 0 bytes in size
By mlevin77 in forum ffmpegX general discussionReplies: 6Last Post: 21st Oct 2008, 17:04 -
Videos expands off screen
By Squid_uk in forum Newbie / General discussionsReplies: 13Last Post: 15th Sep 2008, 18:40 -
Unneeded Bytes At The End Of DivX Video
By kinlunyu in forum Video ConversionReplies: 1Last Post: 11th Jun 2008, 11:01 -
How to adjust the audio to be all the same in every video file added todvd?
By f-zer0 in forum AudioReplies: 5Last Post: 27th Feb 2008, 18:01