Looking for a camera with an SD video in a smooth rate

[gerry667]

Hello video help forum, old idiot here.
you can call me gerald.
I'm getting on in years and I never paid much attention to video resolutions, frame rates or aspect ratios.
until recently. I see all this new uh stuff being made and I'm simply not interested in mega HD or 4k or whatever the new buzzword is.

what I'm looking for is a camera that only shoots in/ can shoot in a 4:3 aspect ratio, at 60p (or 60 fps, whatever)
I've found several cameras that can technically do this, but they're all some 'wide' aspect ratio. It'll claim to do 480/60p but what it really is doing is 854 x480, which is a 16:9 ratio. or its doing 720 x 480, which is a 3:2 ratio.
I'm really fed up trying to look up JVC or Sony manuals trying to find a camera that can actually do what I want, not *technically* what I want. (many are just filled with no info, as if it needed to be hidden from consumers...) all these manuals will tell me it can do whatever width resolution at 24/30/60p, or it will tell me the resolution is 640 x480 but won't tell me the frame rate (usually @30p which isn't what I want)

I've gone and bought 3 cameras already like an idiot hunting and being misled and probably should have asked for help first.
I'm not interested in filming 16:9 and cropping being I'm not trying to lose information and that I'm entirely hopeless at editing. (yes, I have tried that program you're about to recommend, I am bad at computering.) I don't even care if its HD or not, I'm just looking for a camera that is 4:3 at 60p, with (I guess) square pixels rather than the mess of anamorphic or non-square pixels. and I suppose I ought to use something with no tapes, because I guess they aren't made anymore...
I know that even the exact same resolution can be made pretty much any ratio and you squash and stretch to fix it in post. I'd like to avoid any post shooting edits.

doing research is a huge pain because like I mentioned manuals have all got partial info, or technically true info that turn out not to meet my criteria. for some more popular cameras, if I'm lucky I can find some 10 year old unboxing video and then hope I get lucky again and they click through the camera menus and show off the different resolution and frame rate modes. I have not been that lucky very often. Internet searching in general has just become almost incomprehensible in general the past few years and I have no idea why.

if anyone here has knowledge on what I'm looking for, I do appreciate your time.
yes, I am a video idiot.

thanks
Gerry
-

[Sharc]

How are you going to watch these videos? On a legacy 4:3 CRT TV? On a "modern" 16:9 TV? Take note that for the latter you would always have large left and right black bars on the TV screen when watching your 4:3 video.

(Legacy) digital D8, DV videocams record and store "4:3" video anamorphic as 720x480, 60i (SD, interlaced, NTSC). The TV/player converts the anamorphic 720x480 (3:2) picture to 4:3 on the fly and deinterlaces (converts) the 60i to smooth 60p. Legacy 4:3 CRT TVs would play it as 60i. I am not aware of any videocam which records video as 640x480 (4:3) - except for still pictures.
What are your 3 disappointing camera models? Check the settings. Some have the choice between 16:9 and 4:3 (e.g. by setting 16:9 to "OFF" for SONY TRVxxx), and later HD (AVCHD, mp4) models record in square pixels like 1920x1080 for 16:9, or maybe some 1440x1080 for native 4:3. Details depend on the model. Newer 2k, 4k models are all 16:9 only AFAIK (except for still pictures where one has the choice).

A pre-owned DV or Digital8 (SONY DCR-TRV series) model is probably closest to what you are looking for.
Also check your TV settings if it does automatically adjust the aspect ratio according to the source, otherwise you need to set it manually.

[gerry667]

the display I watch it on doesn't matter.
I don't mind black bars on my videos as long as I'm not recording them onto the video itself. I assume my TV is a 16:9er, so if it shows black bars, that is okay. I may also try to use my computer tower to watch the videos, I use the VLC video player. I'm not optimistic a PC or a TV will take a 4:3 video (recorded as 3:2) and squash and stretch it into the 4:3 ratio it should be, reliably.

digital8 and DV cams are nice, but I don't think those tapes are being made anymore, so once the stock runs out, that's it. I'm also a bit aprehensive about 60i. like I mentioned previously, I'm not too familiar with video, I used to just shoot it and play it. however, I was told that deinterlacing a 60i video will not give you 60p. I would either get 30p from it, or a 30p video interpolated to 60p.
I'm not too bothered if the resolution is 640 x 480 or not, my only requirements are that whatever resolution it may be needs to be, its needs to be at 60p in a 4:3 ratio. if its HD or sub SD, I don't care, as long as its 4:3, 60p, etc etc

I don't have trust in whatever I watch these things on to be smart enough to de-anamorphic to the ratio I want, and deinterlace satisfyingly, *and* at the right framerate all at once.
the more I can just 'bake' into the video, the better, and de-interlacing, interpolating, and anamorphic are not that
I'm tired of editing and futzing around with TV settings.

[Sharc]

I might be wrong but I don't think you can find what you want with current consumer camcorders. They ar all 16:9 AFAIK, even though they have an option to store the video as 1440x1080 60p which is in fact anamorphic 16:9, so it plays as 16:9.
You might have your reason why you insist on 4:3. The simplest solution is probably to mark the 4:3 frame on the 16:9 flip-out screen and then mask or crop it in post.
Maybe someone else will chime in with a better proposal.

Edit:
Here a pro line with 4:3 sensor, model E2-M4 Mark II:
https://www.z-cam.com/