Hello all,

Well, I've taken the plunge and am trying to create a stills-menu
(for starters) with chapters (entrypoints) XVCD with TSCV. I am using
TSCVv84r2 with an MPEG-1 source file with video at 2400kbps and
audio at 224 kbps. Resolution is standard 352x240.

I used TSCV to create chapter entrypoints every 200 seconds
in the MPEG. I also made sure to encode the MPEG with the
closed GOP setting enabled in TMPGEnc 2.02.

TSCV appears to build the still-menu correctly in the MenuGen
function, but when I try to build the BIN/CUE file I get the
following errors:

---------------------------------------
Starting VCDxBuild process...

initializing libvcd 0.7.12 [cygwin/i686]

this is the UNSTABLE development branch!
use only if you know what you are doing
see http://www.hvrlab.org/~hvr/vcdimager/ for more information

front margin set smaller than recommended (0
rear margin set smaller than recommended (0
scanning mpeg sequence item "menu-0" for scanpoints...
scanning mpeg sequence item "sequence-1" for scanpoints...
requested entry point (id=entry1-1) at 200.000000, closest possible entry point at 66.065989
requested entry point (id=entry1-2) at 400.000000, closest possible entry point at 66.065989
entry point 'entry1-2' falls into same sector as previous one!
requested entry point (id=entry1-3) at 600.000000, closest possible entry point at 66.065989
entry point 'entry1-3' falls into same sector as previous one!
writing track 1 (ISO9660)...
writing file `CDI/CDI_IMAG.RTF' (1315168 bytes, raw sectors file)
writing file `CDI/CDI_TEXT.FNT' (13616 bytes)
writing file `CDI/CDI_VCD.APP' (102400 bytes)
writing track 2, MPEG1, NTSC SIF (352x240/30fps), audio[0]: l2/44.1kHz/224kbps/stereo ...
finished ok, image created with 55058 sectors [12:14.08]


VCDxBuild finished
---------------------------------------

When I try to burn the resulting BIN/CUE I get an error stating that
the entrypoints are invalid....

Can someone tell me what I am doing wrong here? Also, TSCV doesn't
appear to report the MPEG duration correctly for hi-bitrate MPEG
even though I checked the "X" box on the main "Settings" page.
Have I missed a setting here?

Any help is appreciated. Thanks,
vcddude