VideoHelp Forum




+ Reply to Thread
Results 1 to 5 of 5
  1. Member blinky88's Avatar
    Join Date
    Mar 2004
    Location
    Australia
    Search Comp PM
    I have just installed the above mentioned M/B and am getting no response from the USB ports. I have 2 USB 2.0 thumb drives attached however they are none operational. Would really appreciate help from any member using the same board who can explain what is causing the problem.
    Quote Quote  
  2. Member edDV's Avatar
    Join Date
    Mar 2004
    Location
    Northern California, USA
    Search Comp PM
    Originally Posted by blinky88
    I have just installed the above mentioned M/B and am getting no response from the USB ports. I have 2 USB 2.0 thumb drives attached however they are none operational. Would really appreciate help from any member using the same board who can explain what is causing the problem.
    Did you install the mobo drivers?
    Recommends: Kiva.org - Loans that change lives.
    http://www.kiva.org/about
    Quote Quote  
  3. That is a old model motherboard.

    Did you check the BIOS to see if they are enabled? They may just be bad. Check Device manager to see if windows thinks they are working.

    Suggestion: Buy a cheap USB2 pci card.
    Quote Quote  
  4. Member blinky88's Avatar
    Join Date
    Mar 2004
    Location
    Australia
    Search Comp PM
    Hi edDV,

    Thanks for suggestion, never crossed my mind .... solved the problem.
    Quote Quote  
  5. Member edDV's Avatar
    Join Date
    Mar 2004
    Location
    Northern California, USA
    Search Comp PM
    Originally Posted by blinky88
    Hi edDV,

    Thanks for suggestion, never crossed my mind .... solved the problem.
    There should be divers for everything else too ... sound, ports, processor, display chipset, ...
    Recommends: Kiva.org - Loans that change lives.
    http://www.kiva.org/about
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!