What codec should I prefer for realtime capture
Frame 768*576*25
- 3ivX (Constant Qual Q=2, HalfPixel enabled, No - MPEG, FourVect, AQ)
- HDX4 (Q=1, High ME, No - QPel, MPEG)
- Xvid(Q=2, ME - 4 High, CME, NO - VHQ, BVOPS, AQ, Trellis)
- InterVideo MPEG2 (720*576, 5000kbit/sec, 32 vect motion, 15:3)
I'm running AMD Sempron 3000 x64.
+ Reply to Thread
Results 1 to 19 of 19
-
-
If you care about quality - none of them.
Do you intend to edit this or put it to DVD ?
If so, use either an uncompressed or lossless compression codec, or DV. If you are going to put it to DVD, encode it after capturing.
What I am saying is that the purpose of the video will drive the codec. So what is your purpose ?Read my blog here.
-
Originally Posted by guns1inger
-
But best quality on what? Standard DVD Video On TV, Standard Divx/Xvid for player on TV?
Portable player?
Play only on Computer?
Also source matters too.
If for example from VHS either DV AVI into computer for further processing or DVD Recorder.
From a Direct HDTV stream?
IOW more details. -
Originally Posted by TBoneit
All of that I will watch on Pc. Maybe in future on standal. DVD player. -
what software are you using to capture
what is the hardware description?
what is the source .. terrestial (digital or analogue), satellite(ergo), cable or VCR
mpeg2 (9800kbs) or xvid(1500k no bvops or gmc or qpel) the others are shot.(shoot me down) :PCorned beef is now made to a higher standard than at any time in history.
The electronic components of the power part adopted a lot of Rubycons. -
Originally Posted by RabidDog
So source - analogue TV - as for ordinary TV set.
HardWare:
CPU: Sempron 3000+ x64
MB : Asus K8N-E
RAM: Samsung 1Gb DDR400
HDD: Samsung 160Gb SP1614N
AGP: MSI ATi Mobility Radeon 9600 128Mb/128Bit
PCI: BeholdTV 507RDS
PCI: Creative SB Live! 5.1 Digital
PSU: FSP ATX-300PNF
Originally Posted by RabidDog -
Divx's "fastest" preset is faster than Xvid's "realtime" preset. Xvid will give smaller files though (using constant quantizer compression).
You'll probably drop lots of frames with any MPEG 4 codec. DV and MJPEG codecs will give you lower CPU utilization (fewer dropped frames) but they won't compress as well. -
Originally Posted by jagabo
3ivX makes video washed-out, as after smoother.
HDX4 - gives rather good picture, but it is unable to limit video bitrate (for example not nomre then 10000kbit/s).
MPEG-2 - gives only constant bitrate and not a cont quality. -
Originally Posted by Livesms
Originally Posted by Livesms -
As I understand it then you are capturing using the tuner card software? Then you want to convert to something to store it on the hard drive?
If so then convert to Xvid or Divx since that is a standard format that many DVD player are now supporting. Divx/Xvid will yield smaller file sizes than MPEG2 for the same quality.
Thus when you say "Maybe in future on standal. DVD player. "
MPeg2 that is encoded in DVD specs or the DIVX/XVID options become the best bet as You can buy Divx players now that also play DVDs. DVDs will probably be the longest supported format for home players of course having much more product out there.
I hope it isn't anything you would hate to lose. With hard drives it is only when they will die not if they will die. -
Originally Posted by jagabo
Originally Posted by jagabo
Originally Posted by TBoneit
Originally Posted by TBoneit- but it is not a problem. I've got 5 PC in my dept for my personal night encoding
)
-
For storing video on a computer there's no point in using 2-pass encoding. Since files don't have to be a specific size just pick the quality you want an use single pass constant quality encoding.
Try this: encode a video with whatever single pass constant quality setting you want. Then encode with a 2-pass encode and make a file of the same size (ie same average bitrate). You'll see the two look almost identical. -
Originally Posted by jagabo
But it is quite starnge to hear about 1 pass and 2 pass the same quality.
What about x264 as a final codec to store in?
And what about subj -
Originally Posted by Livesms
-
Originally Posted by Livesms
1-pass constant quality encoding is about getting the smallest file size (lowest bitrate) for the quality you choose.
It shouldn't really come as a surprise that when the two happen to meet (the same file size) that the quality is similar. -
Originally Posted by thecoalman
).
So I cant take 70 Gb video for Huff compressed - I've get only 2 Gb USB Driver or 4.7Gb DVD-RW - so I'm trying to fit 1 hour into 2 or 4 hours. -
Go for the mpeg2 @ high bitrate then bung it on to a DVD-rw.You should get 2 hours of stuff quite easily per disc.I use the intervideo mpeg2 to capture, I always capture in best quality (about 8000) and sometimes convert to xvid(tuesdays and thursdays) or divx(mondays and fridays) others I just author a dvd image (oversize 6, 7 8gb) then shrink that (wednesdays and weekends)
I think rejig will perform a "shrink" on mpeg streamsCorned beef is now made to a higher standard than at any time in history.
The electronic components of the power part adopted a lot of Rubycons.
Similar Threads
-
X264 / XVID realtime encoding with OTA Capture
By Frank420 in forum Capturing and VCRReplies: 4Last Post: 15th Mar 2012, 14:03 -
Best tool for realtime DV preview/capture?
By Drevin in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 0Last Post: 9th Feb 2011, 09:28 -
FLV files as a capture format......from a DVCAM in realtime?
By Palmer Eldritch in forum Capturing and VCRReplies: 2Last Post: 10th Dec 2009, 21:41 -
Help with the Toshiba SD 5000
By boub in forum DVD & Blu-ray PlayersReplies: 0Last Post: 30th Jun 2007, 15:51 -
3ivX to XviD problems...
By GangstaRap in forum Video ConversionReplies: 8Last Post: 6th May 2007, 11:25