From .mov to .3gp, can't convert

[JuyLe]

Here are my settings:



Here is what i get when encoding :

Encoding started on Sun Apr 2 16:38:02 CEST 2006
Mac OSX static build for ffmpegX
Seems that stream 1 comes from film source: 3000.00 (3000/1) -> 30.00 (30/1)
Input #0, mov,mp4,m4a,3gp,3g2, from '/Users/julienT/Movies/pentricks':
Duration: 00:03:08.7, start: 0.000000, bitrate: 318 kb/s
Stream #0.0: Audio: WMA2 / 0x32414D57, 22050 Hz, mono
Stream #0.1, 30.00 fps: Video: WMV3 / 0x33564D57, 320x240
Codec type mismatch for mapping #0.0 -> #0.0

Thanks in advance for any help.

[Case]

Codec type mismatch for mapping #0.0 -> #0.0

Enable "invert mapping" in the audio tab.

[JuyLe]

Thanks but still doesn't do the trick, here is what it says to me:

[quote–Encoding started on Mon Apr 3 17:17:34 CEST 2006
Mac OSX static build for ffmpegX
Seems that stream 1 comes from film source: 3000.00 (3000/1) -> 30.00 (30/1)
Input #0, mov,mp4,m4a,3gp,3g2, from '/Users/julienT/Movies/pentricks':
Duration: 00:03:08.7, start: 0.000000, bitrate: 318 kb/s
Stream #0.0: Audio: WMA2 / 0x32414D57, 22050 Hz, mono
Stream #0.1, 30.00 fps: Video: WMV3 / 0x33564D57, 320x240
Output #0, 3gp, to '/Users/julienT/Movies/pentricks.ff.3gp':
Stream #0.0, nan fps: Video: h263, yuv420p, 176x144, q=2-24, 30 kb/s
Stream #0.1: Audio: amr_nb, 8000 Hz, mono, 12 kb/s
Stream mapping:
Stream #0.1 -> #0.0 [sync #0.0]
Stream #0.0 -> #0.1 [sync #0.1]
[h263 @ 0x444b70]removing common factors from framerate
Unsupported codec (id=0) for input stream #0.0[/quote]

[Case]

Check the Options tab, see if 'Decode with QT' is marked. If it is checked and you have Flip4Mac installed, try de-selecting it, so the ffmpeg decoder may try to read the WMV, instead of QuickTime. If 'Decode with QT' isn't checked, install Flip4Mac, and select that option. Two roads to travel, use the one that works best for you.

[JuyLe]

Thanks, it wasn't checked, but the lastest flip4mac release is installed on my computer.

Here is what i get now:

Tue Apr 4 17:34:36 CEST 2006
Mac OSX static build for ffmpegX
Seems that stream 1 comes from film source: 3000.00 (3000/1) -> 30.00 (30/1)
Input #0, mov,mp4,m4a,3gp,3g2, from '/Users/julienT/Movies/pentricks':
Duration: 00:03:08.7, start: 0.000000, bitrate: 318 kb/s
Stream #0.0: Audio: WMA2 / 0x32414D57, 22050 Hz, mono
Stream #0.1, 30.00 fps: Video: WMV3 / 0x33564D57, 320x240
Codec type mismatch for mapping #0.0 -> #0.0

[Case]

Did you still have "invert mapping" enabled on that last try?

[JuyLe]

Yes i did .

[Case]

Google Video has the vid in AVI format, which ffmpegX does convert well to 3gp.

[JuyLe]

Many thanks for your help.