Power Calibration

[chandraravi]

Hi

Any one Please help me. I am fedup with this Power calibration error.

In the past (3-6) months I have burned about 20DVDs 4X(quentin media) in my Poineer 107D model.

Now I am using same brand but 8X media, tried even all the speeds from 1X to 8X still getting calibration error.

I did use good DVD lense cleaner dry type with brush etc.

It is not that DVD writer does not write at all, if use the old 4X media of the same brand it still works, only problem with new stock.

The new DVD Media 8X it does not state it can support 1X to 8X, is it possible in that case this media can support only 8X burning.

In some cases i have seen specifically they state media can support different speeds with max speed.

Please help me

Enclosed log file

Thanks & regards

Ravi

[chandraravi]

AON
AON

Serial : Removed........


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 5:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.10 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-107D>Version: 1.10 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380021A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ CD-ROM LTN486S atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-107D G: CDRom0
COMPAQ CD-ROM LTN486S H: CDRom1
Generic DVD-ROM I: CDRom2
Generic DVD-ROM J: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 594MB (608436kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.2.2005
ISO compilation
11:46:20 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:46:20 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:46:20 PM #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-107D running

11:46:20 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

11:46:20 PM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

11:46:21 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 816047 (181:20.47, 1593MB)

11:46:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

11:46:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

11:46:21 PM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:46:21 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 816048 (816048) = #816048/181:20.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 816048 blocks [PIONEER DVD-RW DVR-107D]
--------------------------------------------------------------

11:46:21 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1671266304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
816048 | lead-out | 1 | 0x41 | 0x00

11:46:21 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:46:21 PM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

11:46:21 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:46:21 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1,385 KB/s)

11:46:21 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:46:21 PM #17 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode

11:46:21 PM #18 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> ON

11:46:21 PM #19 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

11:46:21 PM #20 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:46:22 PM #21 Text 0 File Cdrdrv.cpp, Line 1284
23:46:22.140 - PIONEER DVD-RW DVR-107D\H1 T0 : Queue again later

11:46:41 PM #22 SCSI -1106 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03C90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

11:46:41 PM #23 CDR -1106 File Writer.cpp, Line 311
Power calibration error

11:46:41 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:46:41 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:46:41 PM #26 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 767

11:46:41 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 1x (1,385 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 6:02:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/14/2004 10:29:26 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 1:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[handyguy]

It usually a media issue. Just cause you used the same stuff before doesn't mean you're going to get the same results.

You might be able to write at 2x & work from there & see if that works.