VideoHelp Forum




+ Reply to Thread
Results 1 to 11 of 11
  1. I have tried to burn a video, 1 hour and 40 minutes long, on to 1 dvd and have had no luck. I am capturing a DV. Editing it with VideoFactory 2.0. I have tried to save it as an avi, mpeg1 and mpeg2, and burn it to a DVD-r disc using SOnic MyDVD. It won't allow me to burn, and I can only assune it is because of the length of the video. I was under the impression that a DVD should be able to hhold 2 hours of video. I have had to burn the video on to 2 seperate disc's. Let me know if anyone else has had this problem and can recommend a solution.

    Thanks
    Quote Quote  
  2. Member
    Join Date
    Nov 2002
    Location
    London, UK
    Search Comp PM
    It depends on the bitrate you are encoding with. At 4800 VBR and 9570MBR I can fit 2 hours with pretty good quality. This is footage from VHS captured to digital.

    Use the bitrate calculator www.dvdrhelp.com/calc.htm
    Quote Quote  
  3. Member Sifaga's Avatar
    Join Date
    Aug 2003
    Location
    Melbourne, Australia
    Search Comp PM
    Hey aparks,

    I am playing around with DV to DVD at the moment and i suggest you find yourself a guide to follow.

    check out the guides on the left hand side under DV to DVD


    this is the guide that i am following and am having some success with

    http://dvd-hq.info/Compression.html

    its taking abit long using this method but i am happy with the result.

    I am tweaking some of the settings to get a balance between quality and processing.
    Quote Quote  
  4. VH Veteran jimmalenko's Avatar
    Join Date
    Aug 2003
    Location
    Down under
    Search PM
    Your bitrate will be at fault. Use the bitrate calculator here to work out what you need to set your Average bitrate to in order to fit on 1 DVDR.
    If in doubt, Google it.
    Quote Quote  
  5. Member
    Join Date
    Feb 2004
    Location
    Montreal, CANADA
    Search Comp PM
    It's a question of bitrates. I also do a lot of DV AVI -> DVD

    Here are my favorite settings:

    2 hours - Standard Quality (720x480)

    Video: Average VBR 4.8 mbit/s, Max 9.0mbit/s
    Sound: Dolby Stereo AC3 192 kbit/s

    1h30 - High Quality (720x480)
    Video: Average VBR 6 mbit/s, Max 9.0mbit/s
    Sound: Dolby Stereo AC3 192 kbit/s

    3 hours - Standard Quality Half D Resolution (320x480)
    Video: Average VBR 3 mbits, Max 4.5 mbit/s
    Sound: Dolby Stereo AC3 192 kbit/s or Mp2 224 kbit/s
    (Even at 320x480, the quality is still far superior to VHS)
    Quote Quote  
  6. Member
    Join Date
    Mar 2002
    Location
    United States of America
    Search Comp PM
    Originally Posted by Akiraro
    It's a question of bitrates. I also do a lot of DV AVI -> DVD

    3 hours - Standard Quality Half D Resolution (320x480)
    Video: Average VBR 3 mbits, Max 4.5 mbit/s
    Sound: Dolby Stereo AC3 192 kbit/s or Mp2 224 kbit/s
    (Even at 320x480, the quality is still far superior to VHS)
    Half D1 Resolution isn't 320x480 but 352x480(576). :P
    "We know who we are, but not what we may be" - William Shakespeare
    Quote Quote  
  7. I am pretty sure that is has to do with the encoding bitrate (or quality) chosen by Sonic MyDVD software. I don't know much about this software but I am using a few others that are similar. (neoDVD Plus only fit 90mins at best quality, 6500 kbps). To fit 2 hours, I have to encode using TMPGenc.

    As others have said, lowering bit rate is a must for the MPEG-2 to fit on the DVD.
    ktnwin - PATIENCE
    Quote Quote  
  8. Sonic MyDVD uses PCM for audio, that takes up a lot of room. No way to use anything else. Also, even if you feed it mpeg2, it will re-encode it.

    Use an authoring program that allows you to use MP2 or AC3 (TMPGEnc DVD Author is one)
    Quote Quote  
  9. I use sonic mydvd also and I have the same problem as aparks. How exactly can I change the bitrate so I can fit more on the dvdr? Do you change it within sonic mydvd or what?
    Quote Quote  
  10. Here's another idea. Convert to mpeg2 at whatever bitrate suits you, then compress with DVD Shrink, InterVideo DVD Copy or other compression program. I suggest a bitrate that will not exceed 4.4 gbs by too much. I use this approach with a hardware mpeg encoder that works at standard bitrates which often creates a non-compliant DVD. I use TMPGE Author to create the folders, and Shrink to compress. Hopefully, Ulead allows creation of non-compliant folders, i.e. in excess of 4.4 gb.

    LRD
    Quote Quote  
  11. MyDVD 5.2 allows users to choose PCM or AC3 (192 M bits/s) for audio, and it does not re-encode the MPG2 video when the imported MPG2 video’s bitrate <= 8M bits/s. The software always uses bitraete 7M bits/s when it encodes, so users cannot set bitrates.

    If you select AC3 for audio and MyDVD 5.2 encodes the video, a disc is able to hold 84 minutes movie.

    If you got your MyDVD 4 with a SONY burner, you can get a free copy of MyDVD 5.2 from http://sony.storagesupport.com/dvdrw/downloads.htm
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!