VideoHelp Forum




Results 1 to 3 of 3
  1. tbush
    Guest
    Hi Major,
    Because of that % bug, ffmpegx couldn't create the ts files that I needed to make a dvd. I tried to use the mux as tool to combine the elementary streams, and this is the message in the progress window

    INFO: [mplex] mplex version 2.2.2 ($Date: 2003/05/13 20:27:15 $)
    INFO: [mplex] File /Volumes/FireWire 78100/wed2movie.m2v looks like an MPEG Video stream.
    INFO: [mplex] File /Volumes/FireWire 78100/wed2movie.mp2 looks like an MPEG Audio stream.
    INFO: [mplex] Video stream 0: profile 8 selected - ignoring non-standard options!
    INFO: [mplex] Found 1 audio streams and 1 video streams
    INFO: [mplex] Selecting dvdauthor DVD output profile
    INFO: [mplex] Multiplexing video program stream!
    INFO: [mplex] Scanning for header info: Video stream e0 (/Volumes/FireWire 78100/wed2movie.m2v)
    INFO: [mplex] VIDEO STREAM: e0
    INFO: [mplex] Frame width : 720
    INFO: [mplex] Frame height : 480
    INFO: [mplex] Aspect ratio : 4:3 display
    INFO: [mplex] Picture rate : 29.970 frames/sec
    INFO: [mplex] Bit rate : 2300000 bits/sec
    INFO: [mplex] Vbv buffer size : 229376 bytes
    INFO: [mplex] CSPF : 0
    INFO: [mplex] Scanning for header info: Audio stream c0 (/Volumes/FireWire 78100/wed2movie.mp2)
    INFO: [mplex] MPEG AUDIO STREAM: c0
    INFO: [mplex] Audio version : 1.0
    INFO: [mplex] Layer : 2
    INFO: [mplex] CRC checksums : no
    INFO: [mplex] Bit rate : 28672 bytes/sec (224 kbit/sec)
    INFO: [mplex] Frequency : 48000 Hz
    INFO: [mplex] Mode : 0 stereo
    INFO: [mplex] Mode extension : 0
    INFO: [mplex] Copyright bit : 0 no copyright
    INFO: [mplex] Original/Copy : 0 copy
    INFO: [mplex] Emphasis : 0 none
    INFO: [mplex] SYSTEMS/PROGRAM stream:
    INFO: [mplex] rough-guess multiplexed stream data rate : 2568544
    INFO: [mplex] target data-rate specified : 10080000
    INFO: [mplex] Setting specified specified data rate: 10080000
    INFO: [mplex] Run-in Sectors = 89 Video delay = 13019 Audio delay = 16022
    INFO: [mplex] New sequence commences...
    INFO: [mplex] Video e0: buf= 237568 frame=000000 sector=00000000
    INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
    INFO: [mplex] Scanned to end AU 214359
    INFO: [mplex] STREAM e0 completed @ frame 214359.
    INFO: [mplex] STREAM c0 completed @ frame 298017.
    INFO: [mplex] Multiplex completion at SCR=643724288.
    INFO: [mplex] Video e0: buf= 213306 frame=214359 sector=00999742
    INFO: [mplex] Audio c0: buf= 1408 frame=298017 sector=00099143
    INFO: [mplex] VIDEO_STATISTICS: e0
    INFO: [mplex] Video Stream length: 2009977404 bytes
    INFO: [mplex] Sequence headers: 14352
    INFO: [mplex] Sequence ends : 1
    INFO: [mplex] No. Pictures : 214359
    INFO: [mplex] No. Groups : 14352
    INFO: [mplex] No. I Frames : 14352 avg. size 20395 bytes
    INFO: [mplex] No. P Frames : 57169 avg. size 10304 bytes
    INFO: [mplex] No. B Frames : 142839 avg. size 7898 bytes
    INFO: [mplex] Average bit-rate : 2248000 bits/sec
    INFO: [mplex] Peak bit-rate : 2777600 bits/sec
    INFO: [mplex] BUFFERING min 15 Buf max 134306
    INFO: [mplex] AUDIO_STATISTICS: c0
    INFO: [mplex] Audio stream length 200268096 bytes.
    INFO: [mplex] Syncwords : 298018
    INFO: [mplex] Frames : 298018 padded
    INFO: [mplex] Frames : 0 unpadded
    INFO: [mplex] BUFFERING min 15 Buf max 683
    INFO: [mplex] MUX STATUS: no under-runs detected.
    mkdir: /Volumes/FireWire: File exists
    mkdir: 78100/wed2movie.mpg.DVD: No such file or directory

    Could you tell me what I am doing wrong? Your help is very much appreciated. Thank you

  2. Originally Posted by tbush
    mkdir: /Volumes/FireWire: File exists
    mkdir: 78100/wed2movie.mpg.DVD: No such file or directory
    Remove the pesky space between "FireWire" and "78100".

  3. tbush
    Guest
    Thank you Major....problem solved.




Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!