Can't Transfer From S-VHS

[Macdon22shipp]

I have a Pioneer 310-s DVD Recorder and a JVC S-VHS VCR. I have it hooked up in the front with an S-Video cable and RCA cables. Once i record and finalized the disc it will play back but i don't have any audio or video just a black screen. I've selected the L-2 (that's my front input)on my recorder but i get nothing. Just did a recording from mt camcorder and all was fine but VCR recording doesn't work. Thanks for any help

[andkiich]

I had a VCR once that needed to be set to LINE OUT before it would broudcast through the SVHS or RCA jacks. YOu might want to check something like that.

[PhilipL]

Withdrawn

[Macdon22shipp]

Yes i will try the raer outputs. And will let you know what happens. Thanks again.

[Macdon22shipp]

If all else fails read the manual CAREFULLY. It doesn't really say but looking through the manual i noticed that there is a section called "Front Aux. Input" and there is the key word "Input" not Input/Output. So like Philip suggested try the back panel and it worked like a charm. These problems are usually quite simple once you sit back and think about them. Again thanks to all for your help.

[ernet]

Hi,
You could also check the details of a/v in Main menu of 3100. As far as I remember you can chose video L2 input as: S-VHS ( RGB ? ) or Video or decoder.chose the proper input and ....... let us know. I recorded many VHS choosing " Video "L2 IN with no problems at all. Also I manipulated a little in VIDEO/AUDIO IN SETTINGS to get a result better.

greetings