MMB Problem?

[wiedenu]

I'm trying to burn a VCD and have the .img files created by MMT with a .toc file. I try to burn a cd following the directions, terminal opens and starts the burn process. However, before the actual burn starts, the terminal says

Starting write resid: 68
at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
WARNING: No super user permission to setup real time scheduling.
resid: 104
Turning BURN-Proof on
Executing power calibration...
Power calibration successful.
ERROR: Drive does not accept any cue sheet variant - please report.
ERROR: Writing failed.

Anyone know what's going on? I have a DVR-104 that comes with the MDD (DP 867).

Thanks for help.

[Ross]

This is a known issue.

Cdrdao writes as disk-at-once (dao), however it seems the 103 & 104 drives do not support dao.

I have added cdrecord to the latest version of MMB. Cdrecord uses track-at-once (tao). Could someone please try a show info and/or a simulated burn in cdrecord mode, to see if the superdrive (103/104) is supported.

Please report you findings. Thanks Ross

[wiedenu]

Yea, I'll try when I get home - I'm on my lunch break, and don't have time to try a simulated burn.

[wiedenu]

Okay, this is what I got from cdrecord...

./cdrecord: Warning: using inofficial libscg transport code version (csapuntz-scsi-mac-iokit.c-1.4 '@(#)scsi-mac-iokit.c 1.4 02/10/19 Copyright 1997,2001 J. Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-104 '
Revision : 'A227'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
./cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
./cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
./cdrecord: Undefined error: 0. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 3A 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 40s
./cdrecord: No disk / Wrong disk!

Doesn't look like it's supported...

[Ross]

./cdrecord: No disk / Wrong disk!

I get the same error WITH a supported drive, without a disk in place.

Was there a blank cd in the drive when you did this test?

[wiedenu]

Oops!

My bad.

Okay, this is what I get with a blank CD in the drive...

ERROR: /Users/wiedenu/untitled folder/videocd.bin:1: Illegal token:
ERROR: /Users/wiedenu/untitled folder/videocd.bin:1: Illegal token: ?
ERROR: /Users/wiedenu/untitled folder/videocd.bin:1: Illegal token: ?
ERROR: /Users/wiedenu/untitled folder/videocd.bin:1: Illegal token: ?
ERROR: /Users/wiedenu/untitled folder/videocd.bin:1: syntax error at "EOF" missing { TrackDef CdText }

Am I using a wrong kind of .iso? I'm using an image created by MMT because the "generate ISO from data folder" in MMB doesn't seem to work for me. I believe it's because I don't have a program called "mkisofs." Where do I get this?

Thanks for all the help.