DVD2SVCD with TMPGEnc OK with CCE KO :(

[Greenie]

When using DVD2SVCD and CCE a get a freeze and its stops doing the RIP ( opens CCE window and stops ). Using TMPGEnc everything goes OK....

OK means sometimes a get a 1-2 sec pause on the movie on the DVD or it slows for also 1 or 2 sec... Very rare but happens sometimes...

Any idea for those 2 problems?!?

THX alot for the support....

[Jaspa]

the encoder has no effect, for ripping the movie
you mean encoding with cce or tmpgenc.

have you an amd processor and a via chip based mainboard.
this are no good components for useing with the cce, also dont overclook anything.

There is a patch for this avilible. calles CRC Patch,its from tsunami, search for it in the internet, or in kazza, edonkey
and the problem should be solved.

[Greenie]

Thx Jaspa... and yes i mean encoding not Ripping

I'll search for that patch and try to get it working....

And its also true i do have an AMD processor and via chipset...

Thx again...

[VidGuy]

I've had no trouble at all with CCE 2.5 and AMD chips with Via chipset.
AFAIK the only problem with these is if you try and do audio with CCE, and I assume DVD2SVCD is smart enough not to do that, since you don't want to do audio with CCE in any case.....

However, I don't use DVD2SVCD - I do all my encoding manually, so I can't say what might be causing the problems in this case.

[Greenie]

Jaspa, is that name for the patch correct?!?

CRC PATCH from Tsunami!?

Thx

[Jaspa]

here you can get the crc checksum error patch

http://www.smokers-board.de/download-system/cat.php?sec=main&show=10


@ the moderator

this is only the crc patch not a logo remover, hope that you will allow this

[Greenie]

Thx alot