WMV To DV (Not Just A Poll - Have Problem)

[dizzie]

I'm at it again! I have a wmv file I'm trying to take to DV for someone to do further work with. I have the latest FlipForMac installed. When I try without using QT to decode, I get this log:


Encoding started on Mon Jun 4 00:05:28 EDT 2007
Seems that stream 1 comes from film source: 1000.00 (1000/1) -> 30.00 (30/1)
Input #0, asf, from '/Users/2ElKhouris/Movies/2007/07, 5-20 DRHS Slide Show.wmv':
Duration: 00:15:00.0, start: 3.000000, bitrate: 270 kb/s
Stream #0.0: Audio: wmav2, 44100 Hz, stereo, 159 kb/s
Stream #0.1: Video: WMV3, 640x480, 1000.00 fps
Codec type mismatch for mapping #0.0 -> #0.0


When I add invert mapping, I get:


Encoding started on Mon Jun 4 00:06:29 EDT 2007
Seems that stream 1 comes from film source: 1000.00 (1000/1) -> 30.00 (30/1)
Input #0, asf, from '/Users/2ElKhouris/Movies/2007/07, 5-20 DRHS Slide Show.wmv':
Duration: 00:15:00.0, start: 3.000000, bitrate: 270 kb/s
Stream #0.0: Audio: wmav2, 44100 Hz, stereo, 159 kb/s
Stream #0.1: Video: WMV3, 640x480, 1000.00 fps
Output #0, dv, to '/Users/2ElKhouris/Movies/2007/07, 5-20 DRHS Slide Show.wmv.ff.dv':
Stream #0.0: Video: dvvideo, 640x480, 29.97 fps, q=2-15, 25000 kb/s
Stream #0.1: Audio: pcm_s16le, 48000 Hz, stereo, 1536 kb/s
Stream mapping:
Stream #0.1 -> #0.0
Stream #0.0 -> #0.1
Unsupported codec (id=0) for input stream #0.1


When I select decode with QT, I get:


Encoding started on Mon Jun 4 00:06:40 EDT 2007
Seems that stream 1 comes from film source: 1000.00 (1000/1) -> 30.00 (30/1)
Input #0, asf, from '/Users/2ElKhouris/Movies/2007/07, 5-20 DRHS Slide Show.wmv':
Duration: 00:15:00.0, start: 3.000000, bitrate: 270 kb/s
Stream #0.0: Audio: wmav2, 44100 Hz, stereo, 159 kb/s
Stream #0.1: Video: WMV3, 640x480, 1000.00 fps
Codec type mismatch for mapping #0.0 -> #0.0


When I add invert mapping, I get:


Seems that stream 1 comes from film source: 1000.00 (1000/1) -> 30.00 (30/1)
Input #0, asf, from '/Users/2ElKhouris/Movies/2007/07, 5-20 DRHS Slide Show.wmv':
Duration: 00:15:00.0, start: 3.000000, bitrate: 270 kb/s
Stream #0.0: Audio: wmav2, 44100 Hz, stereo, 159 kb/s
Stream #0.1: Video: WMV3, 640x480, 1000.00 fps
Output #0, dv, to '/Users/2ElKhouris/Movies/2007/07, 5-20 DRHS Slide Show.wmv.ff.dv':
Stream #0.0: Video: dvvideo, 640x480, 29.97 fps, q=2-15, 25000 kb/s
Stream #0.1: Audio: pcm_s16le, 48000 Hz, stereo, 1536 kb/s
Stream mapping:
Stream #0.1 -> #0.0
Mon Jun 4 00:06:44 EDT 2007
#0.0 -> #0.1
Unsupported codec (id=0) for input stream #0.1

Anybody got any idears? This is a slideshow I did on a PC with Microsoft Movie Maker. Don't ask.

Thanks!!!!!

P.S. Sorry for the poll. I have just always wanted to do one!

[Case]

Output #0, dv, [...]
Stream #0.0: Video: dvvideo, 640x480, 29.97 fps, q=2-15, 25000 kb/s

What made you change the video size? The DV preset sets the size to the correct 720x480, not 640x480.

Stream #0.1: Video: WMV3, 640x480, 1000.00 fps
This is a slideshow I did on a PC with Microsoft Movie Maker. Don't ask.

a. Couldn't you set the framerate to a more normal value (29.97 fps) than 1000 fps?
b. Couldn't you export from MMM to DV in one go? (I have no idea, just asking...)

[dizzie]

Thanks, Case. I did use MMM to take it to DV after all. I have no idea why it shows as 1000 fps - MMM supposedly exports 30 fps. Thanks as always!!!