New PC / DVD Burn Issues w/DVD Shrink...

[filmjax]

I've just purchased a new PC to replace an aging one, and am unable to get my new DVD burner to make a DVD. Previously I used DVD X Copy and DVD Shrink for burning (and Nero on occasion), but now none of those three will complete a burn.

DVD Shrink gives me these errors/stats upon a failed burn. Anyone have any ideas at all? DMA is enabled.

r: _NEC DVD_RW ND-1300A, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214

8:34:31 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW,
DVD-R/RW.)
Not enough free discspace.
(Medium in drive: DVD-RW. Medium required by compilation: DVD+R/RW,
DVD-R/RW.)

8:34:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2278432 (2278432) = #2278432/506:19.7
relocatable, disc pos for caching/writing not required/required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2278432 blocks [_NEC DVD_RW ND-1300A ]
--------------------------------------------------------------

8:34:31 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4666228736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2278432 | lead-out | 1 | 0x00 | 0x41

8:34:31 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

8:34:31 PM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

8:34:31 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

8:34:31 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

8:34:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

8:34:31 PM #21 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode

8:34:31 PM #22 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

8:34:31 PM #23 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes

8:34:31 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:34:46 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
20:34:46.375 - _NEC DVD_RW ND-1300A\H1 T1 : Queue again later

8:34:52 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
20:34:52.781 - _NEC DVD_RW ND-1300A\H1 T1 : Queue again later

8:37:52 PM #27 CDR -25 File Writer.cpp, Line 304
Queue again later
_NEC DVD_RW ND-1300A\H1 T1

8:37:52 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:37:52 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

8:37:52 PM #30 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 31

8:41:17 PM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)

8:41:17 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

8:41:17 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.7 , size=24698 bytes, created
6/25/2003 3:18:48 AM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)

[offline]

No idea. Try loading a new set of ASPI drivers like ForceASPI

[bartstop]

Are you trying a on-the-fly copy? If so, are both drives on the same IDE channel? Try ripping to HD and then burning.

[budz]

What brand of media are you using? Also there are known software conflicts when you have DVDXCOPY installed. Try uninstalling DVDXCOPY then run DVD SHRINK. What is the brand name of the dvd burner?

[BJ_M]

What brand of media are you using? Also there are known software conflicts when you have DVDXCOPY installed. Try uninstalling DVDXCOPY then run DVD SHRINK. What is the brand name of the dvd burner?

looking above i see:

r: _NEC DVD_RW ND-1300A, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214

[budz]

looking above i see:

guess i'm blind as well as deaf too