Nero ReCode speed

[scootzilla]

I use nero recode and dvd shrink advanced analyis on both of the program and to make a copy of the movie with extras menus and all it take about 3 to 3 and a half hours is that right for my systeme

Amd 2400+
asus nf2 mobo lastest bios
512 333 ddr
ati 9600 xt
80 gig 8 mb buffer hd
80 gig 2 mb buffer hd

[tompika]

I use AnyDVD 3 + Nero Recode 2

About 20-25 min to analyse and another 20-25 min to convert
+ 15-30 min to burn (2x or 4x)

[energy80s]

Using DVD Shrink with full analysis mode on my XP1600 system takes about 50 mins to analyse and 25 mins to convert.

[fargoman]

NO! My specs are very similar, and using Shrink 3.1.2 my whole process using deep analysis on a full 8+gb episodic disk takes 45-55 minutes. That's ripping, analysing, deep analysis, encoding, burning.

Here's a few things to check into, or buy. Make sure you have 2 drives, the burner - and a dvd rom (go with the Lite On at WalMart for under $40). For one it will save wear and tear on your burner, and for me my rip speeds more than 10x on the average. With your burner I'm guessing your at somewhere near 2-3x. Check your aspi layer, or download the newest version. Try to have your dvd-rom set as master, burner as slave if you have them on the same ide chain. Make sure you have all your devices set to DMA mode.

These are the tips that helped me achieve some really good results. I can do some movie only reauthors in as little as 17 minutes, including burn time.

[scottvf]

My system takes 19min to analize and 19min to encode.
I have an asus A7N8X DELUXE with a CPU AMD|3000/333 ATHLON XP BARTON,
1.5 gb ddr 3200 ram
5 western digital hard drives all with 8mb cashe
1. 100gb ata
2. 120gb ata
3. 250gb ata
4. 250gb ata
5. 250gb sata

Leadtek WinFast A280TD GeForce4 Ti4200-8X 128MB DDR 8X AGP - video

[scootzilla]

k i only have nero aspi driver do i need the aspi drivers and my dvd burner is pri and my dvd rom/cd burner is sec. they are on dma