Set up Philips DVDR70, Sat reciver and TV ???

[Troels]

I have a Philips DVDR70
sat reciver
and normal cabel TV

I have pluged the
Sat reciver to Scart 2 on Philips DVD
Scart 1 from Philips DVD is connect to TV
normal cable signal is connectet to Antenne IN on Philips DVD
one cable are connect from antenne out on Philips DVD to TV

now everything works almost fine.
I have all channels on the DVD both from the cabel TV and sat reciver
and I can choose to se the DVD on EXT 1 on the TV and the SAT reciver on EXT 2 on the TV
but is there a way to get the signal from the
DVD to a normal channel on the TV (not the EXT 1 (scart) channel)
and is there a way to get the SAT reciver signal to a normal channel on the TV

Before i got the Philips DVDR i had my channels like this on the TV
Channel 1 = Denmark 1
Channel 2 = Denmark 2
Channel 3 = SAT Reciver

this was done because via a antenne spilter I could se the SAT reciver on my other TV around the house - but now my SAT reciver are gone on the normal channel.

Any one have any solutions to this ??

[BipolarChucker]

Same setup as me. I've been looking into this myself but to no avail. The best method I came up with was a single channel P01 on the DVDR70 that output the Cable but I am using the UHF lead from the cable box for this.

Reading through the manual it seems to expect you to have a TV with a Scart socket (makes sense I guess but....backwards compatibility?).

EXT2 - Sky TV
EXT1 - Cable/TV? (tbh I don't use the channel at all)
P01 - Cable

Everything else is unused.