Lite-on LDW-401s? DVDr prob!

[Sasarchiver]

I am using a Liteon LDW-401s and Bulkpaq 4x DVD+R. my problem is, when i goto burn the disk, either at the start of the process or the end, the burn process fails: Power calibration error, were it fails..but also if its not that error its this one...

10:32:37 AM #25 CDR -1176 File ThreadedTransferInterface.cpp, Line 1594
Session fixation error

10:32:37 AM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1594
Could not perform end of Disc-at-once

10:32:45 AM #27 Phase 127 File dlgbrnst.cpp, Line 1818
Generating DVD high compatibility borders

10:33:05 AM #28 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

10:33:05 AM #29 Phase 129 File dlgbrnst.cpp, Line 1818
Generating DVD borders completed successfully

10:33:05 AM #30 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

10:33:05 AM #31 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 2.4x (3,312 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 12:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Ive used this media before and it worked fine? not one coaster, but now its 2in3 are failing...I upgraded the firmware to es0g, but still the same. so i have a DVD+RW and i tried it on that, it worked fine...So is this the media? if so why did it work ok the first time i got it (but from a different supplier) THX...sasarchiver

[mark_r_wood]

I ran into this with my liteon 401s. It was with the same version of the firmare and nero 6.019 when I upgraded nero the problem went away. Also the disk was not burned when I had the power calibration error so I could burn sucessfully when I set the speed at 2.4 before the upgrade. This was with Fuji media that was working at 4x before the firmware upgrade and at 2.4x after the upgrade. When I upgraded nero I could burn at 4x again. This problem happened with any program that uses nero asapi before the upgrade. In my case the problem was only at the start.

[Sasarchiver]

so upgrading ur nero fixed this problem for you then? i dont understand, one day its fine, next thing, it spits out the disks. nothing has changed, that im aware of? Damn strange thing...Sasarchiver (more help/tips appreciated)