VideoHelp Forum




+ Reply to Thread
Results 1 to 3 of 3
  1. 5th Nov 2003 12:23 #1
    vsenapati
    vsenapati is offline
    Member
    Join Date
    Oct 2002
    Location
    India
    Search Comp PM
    Problem with Maddogmultimedia Prowler MX-440-SE installation: The PCI graphics card supporting PCI 2.0(or higher) is not getting fixed in my PCI 2.2 motherboard because of two notches of the graphics card not matching with the slot of the motherboard. Why is there this incompatibility issue ? Is there any adapter available with which I can use this graphics card in my PCI 2.2 slot ? Is any any other solution ?
    vsenapati
    Quote Quote  
  2. 5th Nov 2003 12:43 #2
    RabidDog
    RabidDog is offline
    Member RabidDog's Avatar
    Join Date
    Oct 2002
    Location
    UK
    Search Comp PM
    STop ! the nothches are there to prevent cards being put into either the wrong slot or a slot with the wrong voltage. Your card probably requires 3.0 volts supply and some adapters only supply 1.5v . Inserting the wrong card in the wrong slot will fry the card. check its correct slot PCI/AGP? and if AGP check for correct voltage.1.5/3.0 ...
    Corned beef is now made to a higher standard than at any time in history.
    The electronic components of the power part adopted a lot of Rubycons.
    Quote Quote  
  3. 5th Nov 2003 13:14 #3
    rallynavvie
    rallynavvie is offline
    contrarian rallynavvie's Avatar
    Join Date
    Sep 2002
    Location
    Minnesotan in Texas
    Search Comp PM
    Beware, that card can catch fire
    Quote Quote  



Similar Threads

« Previous Thread | Next Thread »
Visit our sponsor! Try DVDFab and backup Blu-rays!