I wanted to backup my DVD collection where the DVDs are slowly disintegrate due to the weather.
At the same time I wanted to upscale the DVDs to 1280x720 or 1920x1080.
All DVDs have already been successfully backed to my HDD.
For the next step I wanted to use Handbrake to upscale and convert but it seems there is no option to do that.
Looking into Avisynth I am a bit overwhelmed with all the setting and plugins.
Also some of the DVD material has a lot of grain, like Stargate SG-1 Season 1 to 3 as far as I can tell.
My DVDs are in PAL and NTSC depending on the series / movie.
How do I go about the up scaling and removal of the grain?
I saw that there are GPU supported Avisynth plugins that use the GPU to upscale.
For encoding I prefer to use the CPU as I been reading that the encoded result would look better compared to GPU encoding.
Another strange thing I noticed is that some DVDs seem to have a color mismatch or bad white balance.
I noticed that with my Buffy and Dr Quinn collection.
Is it possible to remove / fix that problem / issue?
My system configuration if needed
CPU: Intel Core I9-9900K
RAM: 64 GB
Windows 10 64 Bit
GPU 1: Intel UHD 630
GPU 2: Nvidia RTX 2060
GPU 3: AMD RX 570 series
+ Reply to Thread
Results 1 to 14 of 14
Or you can slowly upgrade to Blu-ray and get a better version, I've done the same with my DVD's until I got them all replaced, I usually get them for as low as $1 a disc online, though I had only like 300 DVD's. It might be a hassle if you have over a 1000.
where the DVDs are slowly disintegrate due to the weather.
Tip: Don't store DVDs in the attic, garage, non-temp-controlled storage, the dog house etc.
BTW, the more likely reason the discs are "disintegrating" is because the discs were always bad.
What is the media ID of these? CMC, Princo, etc?
You gain nothing by upscaling, and in fact can damage the visual quality.
All of my DVDs are ISOs on 5tb HDD, to watch on my WDTVs.
And those are backed up onto 16tb drives. The original discs are in boxes in a storage closet.
@jagabo - will have to take a look at the program
@dellsam34 - some of them are not available on BluRay
They are kept under the TV in a cupboard.
This are all original pressed DVDs, I assume its the weather as its very hot and humid here in the region where I live.
I got all DVDs as ISOs on my internal HDD for now.
For playing media I would usually use my Nvidia Shield but I never tested that with ISOs before.
I've played ISO DVD files on the Shield using Kodi perfectly, I was amazed on how fast the access speed compared to the actual physical disc in a DVD player. those are the DVD's that never made it to Blu-ray, Everything else is BD ISO's. So yes no need to re-encode anything, just playback the DVD ISO files.
I tried activating the Nvidia up scaling which doesn't work for this content.
Also changed the setting to display actual frame-rate in Kodi.
But the picture doesn't get better.
Is there any way to convert it and remove the grain make it a bit sharper or not recommended?
I saw somewhere to increase the frame rate by factor 2 (to 59.xx fps) to get progressive video, which will look better, but I have no idea if that will work for real.
Last edited by Quantumleap; 26th Dec 2020 at 19:29.
Ok, I will give that a try.
Cause on the 40" (FullHD TV) it looked ok with the DVD player but on the 55" (4K TV) with the Shield not really.
So I thought there might be some settings wrong or is it the difference in pixels it has to upscale FHD compared to 4k?
Yes that's the reason, 55" is bigger therefore the image is blurrier, pretty simple. But like I said DVD is an SD format, it can't get any better even with re-encoding it which you will loose quality in the process of doing it. That's the reason why I upgraded my library to Blu-ray and stopped buying DVD's 10 years ago.
QTGMC is generally considered way better than the likes of Yadif (samples). Granted, it's more difficult to setup, and it's slower, but once it works, it works, and if the goal is to compress to x265 it's gonna be slow anyway, so if going through that hassle, might as well use the best available conversion process. QTGMC also includes an optional denoiser, and the output tends to be slightly sharper than the source (at least at slower settings), some have even stated that the output (encoded with a high enough bitrate) could look subjectively better than the source. But you have to be certain that the source is actually interlaced, otherwise it will do more harm than good. MeGUI works with Avisynth scripts (Handbrake doesn't) and has a module which analyses each source to determine the best way to pre-process it : deinterlacing, inverse telecine, etc. (that's a good start although it's not perfectly reliable and should be double-checked before proceeding).
[Attachment 47392 - Click to enlarge]
[Attachment 47393 - Click to enlarge]
Could it be that my old DVD player was better with up scaling?
Last edited by abolibibelot; 2nd Jan 2021 at 13:02.