Wanting to copy a DVD, but the disc has scuff marks around the periphery as well as minor scratch marks (not seen in photo). It is difficult to copy this disc because the DVD reader can't read some of the disc content due to the scuff marks (and possibly due to minor scratch marks as well).
Looking at cleaning this disc in the hope of eventually being able to copy all of the DVD content.
I've looked at several disc cleaning method videos online, but I have some doubt as to the validity of the cleaning methods, and there seems to be a risk of permanently damaging the DVD disc, which I don't want.
What are known reliable and effective DVD disc cleaning methods/procedures that actually work and minimize chances of permanent disc damage?
Prefer responses from people who have actually carried out the procedure (successfully) themselves.
Thank you.
[Attachment 82594 - Click to enlarge]
EDIT: Forgot to mention that there are no professional disc cleaning services in my area (as far as I'm aware), so I can't use a professional cleaning service (locally).
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays!
+ Reply to Thread
Results 1 to 14 of 14
Thread
-
Last edited by meeshu; 2nd Oct 2024 at 11:09. Reason: Professional cleaning note
-
My experience has been BAD trying home cleaning methods.
So I would recommend finding a professional disk cleaning business.
They have machines for polishing the disk.
It is impractical for a person cleaning a disk for their own use to have one of these machines.
I have tried toothpaste (A joke IMO).
Car polishing & rubbing compound.
All of these left the disk "cloudy" not clean & shiny like new.
If Isopropyl alcohol on a microcloth & a dry buffing with a microcloth doesn't clean the disk enough.
Then I would not use other home cleaning methods.
Try a program named IsoPuzzle to rip the DVD disk.
It has to be used with a decrypter like DVDFab Passkey.
Or AnyDVD. -
Thanks for the comments.
I forgot to mention that there are no known professional disc cleaning businesses in my area, unfortunately.
Yes, I'm a bit wary of these home remedy solutions to clean DVD's. But I'm still trying to keep an open mind on what method works best for cleaning discs without damage. -
For very light scratches and scuffs, this kind of product can be helpful
-
Practice on a blank disc first: wet sand with 1500 grit sandpaper for big scratches then again lightly with 2500-3000 grit. Then with a drill and buffing pad use turtle wax polish compound or headlight compound and spray water and buff. Have done many of times but if you never have before you will ruin a disc. There will be light swirls afterwards but the disc will work again
if all else fails read the manual -
Thanks for the comments.
I'm still undecided which method to use though. But I'm leaning more towards using iso-propyl alcohol with a follow up fine polishing afterwards (but not decided on what polishing compound and polishing procedure to use). I have doubts that the iso-propyl alcohol will remove the scuff marks, but maybe it will?
Sandpaper? A bit reluctant to use that, even ultra fine grit, as it may cause (permanent) damage to the DVD(?)
Baking soda based toothpaste?
Any other suggestions? -
@ meeshu,
What the alcohol will do is clean any "dirt" out of the scratches.
This can allow the laser to read them but will not most of the time.
If you try polishing do as dannyboy48888 suggested : Start with a blank or even another burned disk you consider disposable.
Even put some light scratches on it.
I have tried automotive polishing & rubbing compound but only by hand.
This resulted in a cloudy appearance that was worse to read than just the scratches.
So you will need a buffer pad & arbor to hold it that can be used with a drill.(I never took this step).
But dannyboy48888 posted it is the way to get a good polish on a disk.
For sandpaper it has to be wet sandpaper.
You should not buy by "ultrafine" but by the grit.
You might find the 1500 but I had to order some online to get the even finer grits.
This removed the scratches but I guess I needed to do the drill & buffer pad step.
Because with just sanding the DVD still was not able to be read.
Toothpaste is a joke. Baking soda or other.
If you believe baking soda will do it then try a paste of just baking soda & water.
I never had any luck with this method.
Again maybe with a polishing pad it would work.Last edited by cholla; 5th Oct 2024 at 10:51.
-
I’ve read that Brasso can be helpful but I never tried it. It’s all the same theme, though.
-
Before investing money and more time, inspect the suspected scratched areas with a decent magnifying lens to make certain they are surface scratches and not a separation of disk layers. If they are surface scratches, an aviation or maritime plastic polish that is rated for polycarbonate plastic can usually remove the scratches and not fog up the surface. Good luck.
-
In Texas, United States. Home Depot had all the grits in the paint dept. And yes toothpaste and baking soda will not work. otherwise it would harm your teeth every time your brushed from being too strong and not dissolving
if all else fails read the manual -
I'm also a Texan.
I remember now why I decided to get my sandpaper online.
Home Depot 10 sheets for $8.98 per grit.
Amazon: multi grit packs for less with many more sheets.
Multi Pack 1
https://www.amazon.com/HARFINGTON-Sandpaper-Finishing-Automotive-Polishing/dp/B0D5RJ96...6&sr=8-74&th=1 -
Comments noted, and thanks for the links.
Because there are some contradictions in which cleaning methods to use (primarily from other online sources), it seems I will have to carry out some test cleans (using a variety of cleaning methods) on other disks and see how the results of the tests turn out. Then I'll use the method which gives the best possible result on my scuffed disk. -
meeshu...let us know how your efforts turn out.
Extraordinary claims require extraordinary evidence -Carl Sagan -
Ditto on the results.
mail2tom posted about " aviation or maritime plastic polish that is rated for polycarbonate plastic".
I have never used either one but I thought about maybe using the Lexan headlight cleaner to remove the cloudiness.
I would like to know if it is similar in chemicals to the aviation or maritime plastic polish.
Similar Threads
-
Cleaning videotapes
By banaguitar in forum Capturing and VCRReplies: 8Last Post: 15th Oct 2024, 23:34 -
Cleaning this up
By Lild81603 in forum RestorationReplies: 5Last Post: 10th Sep 2024, 05:18 -
Cleaning Up Cartoons
By pulsar8 in forum RestorationReplies: 11Last Post: 16th Jun 2023, 00:02 -
Cleaning Movies with VSDC
By CptFluffy in forum Newbie / General discussionsReplies: 4Last Post: 7th Jan 2021, 20:04 -
Cleaning minidv tapes - cleaning machine available ?
By VideoEdwin in forum RestorationReplies: 2Last Post: 12th Dec 2019, 10:33