VideoHelp Forum




+ Reply to Thread
Results 1 to 14 of 14
  1. Just installed my drive but have had bad results using "Datawrite Classic 2x" media, not being able to burn a single disc - nero keeps giving "power calibration error" and 2 other software packages also don't do any better.

    Anyone had more success? What media did you use?

    Please post brand / speed burned / read compatibility with other DVD-ROM/PS2/etc if known.
    Quote Quote  
  2. Some more results:

    Bulkpaq burned at 1x, could see directory but files won't open.

    Best results from "Choice" DVD-R - burned good data-disc at 2x.
    Quote Quote  
  3. Bulkpak 1x - plays movie for a while (about 50mins) then is unable to read disc

    Unbranded 2x (TDK according to CDinfo) - won't play at all @ x1 or x2

    going to try some major (expensive) brands to check if drive is defective.

    ShadOLurk
    Quote Quote  
  4. i bought some Datawrite to test with my dvdburner, but no luck with the first one. didn't have more time to test others, but i don't have my hopes very high.

    They failed almost inmediatly at the start of the burning process with Prassi.

    I'll try Princo tonight.
    Quote Quote  
  5. bulkpaq purple top 1x disks play up to about 50 min then go blocky

    datasafe datawrite classic 2 x perfect burn no problems

    bulkpaq green top gen 4 2x perfect burn no problems

    princo dvd rw general 1x perfect no problems

    datasafe dvd rw general 1x perfect no problems

    hope this helps a bit more
    Quote Quote  
  6. memorex DVD-R 1x perfect

    imation DVD-R 1x perfect

    imation DVD-RW 1x perfect

    i'll post more asap
    Quote Quote  
  7. Memorex... some are perfect, and some are play 50 min then blocky...

    Doug
    Quote Quote  
  8. I tried some Memorex 1X I picked up at CompUSA over the weekend. The two I tried out of the box both returned Power Calibration Errors. It also didn't want to record at 16X on the Memorex 32X CD-R's I had, though it worked fine with the Philips 48X ones I have. I think I will go pick up a Imation and Fuji DVD-R's and see how they work. The unknown DVD-RW that came with the drive worked fine.

    Henry
    Quote Quote  
  9. Doug when you say play 50 mins then are blocky, do you have to actually play them 50 mins or is it blocky even when you skip forward to there.

    Because usually what I just do to check is skip forward to the last 2 chapters and check them a couple of minutes
    Quote Quote  
  10. I just got my DVR-105 a few days ago and have only burned one disc, a Maxell 2x DVD-R, and burning it was perfect, and it seems to work properly when putting it in my standalone DVD player, but I haven't tested it extensively yet
    Quote Quote  
  11. anyone tried the Ritek 2x on with the A05 ?
    Quote Quote  
  12. Bulkpaq 2x Gen4 DVD-R (light green top) : perfect

    Choice 2x Gen3 (blue top) : lots of errors at verifying (both at 1x and 2x)

    Datawrite Classic : 2x burn (forced) verified but unreadable on standalone or even dvdrom

    ========= EDIT

    Optodisc 1x RW : perfect
    Quote Quote  
  13. jmbuis, when I get blocky playback on the memorex discs, it h appens either way, playing normally, or skipping to that chapter....

    I think that playing blocky may be more of a authoring problem though, I dont know that it means the m edia is defective as much as the IFO files not being created properly, because I have some memorex discs which play perfectly, but others dont...

    Doug
    Quote Quote  
  14. Princo DVD-R at 1X - Perfect. Burnt more than 15 discs so far
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!