VideoHelp Forum




+ Reply to Thread
Results 1 to 2 of 2
  1. Member
    Join Date
    Sep 2002
    Location
    australia
    Search Comp PM
    I have a xms750 and till now no problem
    but just latly some of the DVD originals will not pay .
    the make a noise in the drive and show no disc.

    what can i do about it. its out of warrantee.

    is there any know adjustments .

    I have taken the cover off and lightly soft cloft the lazer lense in case it had dust.
    Quote Quote  
  2. I'm not an expert on the 750.
    You could try taking it back to strathfield (where I presume you
    bought it) but if the drive mechanism is going (and it sounds like it)
    it needs to be replaced. When you opened the unit up did it
    have an IDE cable interface with the DVD mechanism? If so you
    might be able to drop in a cheap samsung DVD rom drive or similar.

    You could try re-greasing the guiding rod that the laser uses to
    track back and forth (not oil but silicon based electronic grease)
    as this also could be your problem.

    luck!
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!