Can some1 help me to identify my VHS graphic problem?

[harky]

Here is my video link which upload to Utube
https://www.youtube.com/watch?v=XlkVntCn7R0&t=1143s

I using this connection.

Sony SLV-X825MN VCR (set to NTSC playback) -> Panasonic DMR-ES10 (TBC & NTSC) -> Hauppauge USB-Live 2

No issue on other vhs.. so i wonder isit the tape itself is going to spoilt ?
did not see any mould..

[JVRaines]

Most likely the tape is a copy made without correction, or possibly the instability is too great for the ES10 to handle.

[harky]

hmm but it is original vhs.

No way to fix it?

Most likely the tape is a copy made without correction, or possibly the instability is too great for the ES10 to handle.

[manono]

There's no TBC active in that capture. So, either JVRaines is correct that it's from a second generation tape, or the TBC isn't working in your DVD recorder or ... Did you try the other input in the ES10? I have an ES15 and it has 2 inputs and I've read (correctly or not, I don't know), that only one works as a TBC.

[harky]

ehhhhhhhhhhh ok. i go try it again..

actually i only use S-Video so there is only 1 input.

There's no TBC active in that capture. So, either JVRaines is correct that it's from a second generation tape, or the TBC isn't working in your DVD recorder or ... Did you try the other input in the ES10? I have an ES15 and it has 2 inputs and I've read (correctly or not, I don't know), that only one works as a TBC.

[harky]

Hi, i test... ES10 did has TBC but i think it reall too great for the ES10 to handle.
As i connect direct from VCR and bypass..

the so call original vhs, do look like copy

[manono]

actually i only use S-Video so there is only 1 input.

There are two. One in the back and another in the front. I'll enclose a picture. I'm not saying that's going to magically make the TBC work, but only that you should try it.

[JVRaines]

The manual makes no mention of different processing for the inputs. But it does say

Line-in NR (Only when IN1, IN2 or IN3 is selected.)
Reduces video tape noise while dubbing.
Depending on the software, jittering may occur.

So perhaps turning off the Line-in NR will help.