ok um i tried to update my dvd burner drive using the live update at drvupdate.com and about 1/4 way through updating my drive it failed and told me to restart. so i restarted and now my drive doesnt show up in my computer. can someone please help me??? my dvd drive is DRW 1108IM – DVD+/-RW Drive and can be shown here: http://www.btc.com.tw/english/2-2-dvd_rw.htm#drw1108im
+ Reply to Thread
Results 1 to 2 of 2
-
-
Not good.
Try the following:
1) Uninstall the IDE cable and power connector from the drive and power up.
2)Power down
3) Reattach cables and power up again. Check Device Manager and see if it shows up.
4) If it doesn't, put your boot-up messages in verbose mode and look for the drive to be recognized when you restart again. If it doesn't report it there, and your BIOS settings are all correct (auto-sense IDE and both channels still enabled), check again in Windows.
5) If it still doesn't show up, the drive is hosed. You'll have to return it for a replacement.
Similar Threads
-
CloneDVD2 not working with Segate Expansion Drive
By peggypwr1 in forum Newbie / General discussionsReplies: 4Last Post: 12th Apr 2012, 23:51 -
transferring a file to external hard drive not working
By angryassdrummer in forum ComputerReplies: 5Last Post: 15th Apr 2011, 22:27 -
Working with video files on a USB drive
By Murphster05 in forum Newbie / General discussionsReplies: 13Last Post: 3rd Aug 2009, 01:32 -
NERO 9: OMG what a monster!
By jsmithepa in forum ComputerReplies: 16Last Post: 21st Apr 2009, 20:09 -
Replace Dead Hard Drive From DVR 533HS With Working Hard Drive From DVR 640
By gordo1811 in forum DVD & Blu-ray RecordersReplies: 2Last Post: 12th Dec 2007, 15:58