i have had my vcr, and dvd recorder both hooked up threw a splicer i got from my cable co..and am getting too much red on some of the stations..no i dont have digital cable...is there any thing? such as cables/rca wires that work better than one and other???????????????help
+ Reply to Thread
Results 1 to 3 of 3
-
-
Althought I'm not a pro in this area, it almost sounds like your getting some type of interferrence (SP!) from the coax. I would exp check the shielding to make sure there are no visible 'splits' and the connectors to make sure they are not loose.
Coax with gold connectors tend to give you a better signal clairity, but cost more then the 'cheaper' coax. Also, if my memory serves me right, depending on the length of the coax, you can run in to some signal degragration (geeze my spelling needs some help lol), so if possible keep the lengths of the coax to a min.
One other thing, this might not be the problem in your case, but I've seen it happens tons of times. The power goes out, someone mucks with the settings on the tv, etc...so make sure this problem isn't with the color setting on your tv...sometimes its as simple as resetting the tv settings to the factory defaults.
Lastly, yes there are different levels of coax, the cheaper brands (sometimes sold in bulk lengths) don't have the the quality shielding or
connectors as the better products do. It's up to you but I've found it ya watch what ya buy ya can get quality coax for a decent price, and it will usually solve most of your problems.
Hope this helps,
Sabro
Similar Threads
-
PC controlling a cable box (USA time warner cable)
By marcolisi in forum Capturing and VCRReplies: 2Last Post: 4th Aug 2010, 16:24 -
Unable to use HDMI cable with Scientific ATlanta 8300 DVR cable box
By aimee43 in forum DVB / IPTVReplies: 11Last Post: 28th May 2009, 12:21 -
How can I use DVI analog inputs and HDMI from Cable box?
By hamiltonpl in forum DVB / IPTVReplies: 3Last Post: 15th Jan 2009, 20:28 -
PSU with detachable/modular cable management Vs stable cable(Recommendation
By retroborg in forum ComputerReplies: 3Last Post: 15th Oct 2008, 14:50 -
HP m7760n video inputs ~ how do I get these inputs to work?
By FTLOSM in forum Newbie / General discussionsReplies: 6Last Post: 22nd Sep 2007, 19:19