always finish writing a DVD-R with error and fail verify

[kain821]

using compusa dvd-rs, doing data dvd r about 2.5gb in size, turn on cache from network drive, stimulate write (passed), no multi-session, determine write speed but always fail... what's the problem? log included. using nero 6.00.15

Loveless

1A23-1035-0142-2255-8227-3559

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.15
Recorder: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.0.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.0.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23BA-20 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6112 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 25MB (26168kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.9.2003
ISO compilation
2:39:05 PM #1 Text 0 File Isodoc.cpp, Line 5878
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:39:05 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

2:39:05 PM #3 Text 0 File Writer.cpp, Line 127
Writer TOSHIBA DVD-ROM SD-R6112 running

2:39:05 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

2:39:05 PM #5 Text 0 File Burncd.cpp, Line 3169
Turn on Disc-at-once, using DVD media

2:39:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 1206719 (268:09.44)

2:39:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

2:39:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R
Disc Manufacturer: OPTODI - SCK001
Disc Application Code: 64, Disc Physical Code: 193

2:39:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:39:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1206720 (1206720) = #1206720/268:9.45
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1206720 blocks [TOSHIBA DVD-ROM SD-R6112]
--------------------------------------------------------------

2:39:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2471669760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1206720 | lead-out | 1 | 0x00 | 0x41

2:39:05 PM #12 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

2:44:24 PM #13 TRANSFER -15 File ThreadedTransfer.cpp, Line 1800
Cache file too small
<CACHE>

2:44:27 PM #14 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

2:44:28 PM #15 Phase 28 File dlgbrnst.cpp, Line 1843
Speed measurement started

2:44:29 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:51:03 PM #17 Text 0 File WriterStatus.cpp, Line 113
<TOSHIBA DVD-ROM SD-R6112> start writing Lead-Out at LBA 1206720 (1269C0h), lenght 0 blocks

2:51:03 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:51:04 PM #19 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

2:51:04 PM #20 Phase 29 File dlgbrnst.cpp, Line 1793
Speed measurement completed: 4.5x (6,210 KB/s)

2:51:04 PM #21 Phase 32 File dlgbrnst.cpp, Line 1843
Simulation started at 2x (2,760 KB/s)

2:51:06 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:51:06 PM #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 15:16,202 (916202ms) -> OK

2:51:06 PM #24 Text 0 File DVDR.cpp, Line 1479
Recording mode: Sequential Recording Mode

2:51:06 PM #25 Text 0 File Mmc.cpp, Line 19000
Set BUFE: supported -> ON

2:51:06 PM #26 Text 0 File DVDR.cpp, Line 1594
Start write address at LBA 0
DVD high compatibility mode: Yes

2:51:06 PM #27 Text 0 File Cdrdrv.cpp, Line 7909
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:38:03 PM #28 Text 0 File WriterStatus.cpp, Line 113
<TOSHIBA DVD-ROM SD-R6112> start writing Lead-Out at LBA 1206720 (1269C0h), lenght 0 blocks

2:38:03 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:39:01 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

2:39:01 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

2:39:02 PM #32 Phase 33 File dlgbrnst.cpp, Line 1843
Simulation completed successfully at 2x (2,760 KB/s)

2:40:04 PM #33 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 2x (2,760 KB/s)

2:40:04 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:40:04 PM #35 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 15:16,202 (916202ms) -> OK

2:40:04 PM #36 Text 0 File DVDR.cpp, Line 1479
Recording mode: Sequential Recording Mode

2:40:04 PM #37 Text 0 File Mmc.cpp, Line 19000
Set BUFE: supported -> ON

2:40:04 PM #38 Text 0 File DVDR.cpp, Line 1594
Start write address at LBA 0
DVD high compatibility mode: Yes

2:40:04 PM #39 Text 0 File Cdrdrv.cpp, Line 7909
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:11:07 PM #40 Text 0 File WriterStatus.cpp, Line 113
<TOSHIBA DVD-ROM SD-R6112> start writing Lead-Out at LBA 1206720 (1269C0h), lenght 0 blocks

3:11:08 PM #41 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:12:06 PM #42 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

3:12:06 PM #43 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

3:12:06 PM #44 Phase 161 File dlgbrnst.cpp, Line 1843
Burn process completed successfully with warnings

3:12:07 PM #45 Phase 78 File dlgbrnst.cpp, Line 1843
Data verification started

3:17:06 PM #46 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter26-1.rm

3:17:08 PM #47 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter25-2.rm

3:17:11 PM #48 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter25-1.rm

3:17:13 PM #49 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter24-2.rm

3:17:19 PM #50 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter24-1.rm

3:17:22 PM #51 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter23-2.rm

3:17:24 PM #52 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter23-1.rm

3:17:26 PM #53 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter22-2.rm

3:17:28 PM #54 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter22-1.rm

3:17:30 PM #55 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter21-2.rm

3:17:31 PM #56 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter21-1.rm

3:17:33 PM #57 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter20-2.rm

3:17:35 PM #58 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter20-1.rm

3:17:37 PM #59 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter19-2.rm

3:17:40 PM #60 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter19-1.rm

3:17:41 PM #61 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter18-2.rm

3:17:44 PM #62 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter18-1.rm

3:17:47 PM #63 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter17-2.rm

3:17:48 PM #64 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter17-1.rm

3:17:51 PM #65 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter16-2.rm

3:17:53 PM #66 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter16-1.rm

3:17:55 PM #67 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter15-2.rm

3:17:58 PM #68 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter15-1.rm

3:18:01 PM #69 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter14-2.rm

3:18:02 PM #70 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter14-1.rm

3:18:05 PM #71 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter13-2.rm

3:18:07 PM #72 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter13-1.rm

3:18:09 PM #73 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter12-2.rm

3:18:11 PM #74 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter12-1.rm

3:18:13 PM #75 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter11-2.rm

3:18:15 PM #76 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter11-1.rm

3:18:17 PM #77 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter10-2.rm

3:18:19 PM #78 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter10-1.rm

3:18:21 PM #79 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter9-2.rm

3:18:23 PM #80 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter9-1.rm

3:18:25 PM #81 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter8-2.rm

3:18:27 PM #82 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter8-1.rm

3:18:29 PM #83 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter7-2.rm

3:18:32 PM #84 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter7-1.rm

3:18:34 PM #85 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter6-2.rm

3:18:36 PM #86 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter6-1.rm

3:18:38 PM #87 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter5-2.rm

3:18:40 PM #88 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter5-1.rm

3:18:43 PM #89 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
hunter4-2.rm

3:18:46 PM #90 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1645
Read error on CD file
Real Alternative\realalt100.exe

3:18:46 PM #91 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1344
Status summary
Total files=63, identical=18, different=0, inaccessible=45, skipped=0.

3:18:47 PM #92 Phase 81 File dlgbrnst.cpp, Line 1843
Data verification failed


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[SaSi]

Wow! Now that's a comprehensive question.

The interesting part of the log is that it says that recording finished succesfully with warnings, however I failed to find any in the previous eventlog entries.

Verification failed due to read errors. As many files were accessed (18), I assume the disk was recorded to some extent. Verification started at 3:12:07 while errors were reported after 3:17:06, so I assume all the files until them were recorded succesfully and verified ok.

Well, I'm afraid the answer will be quite simple. Change the media you are using. Buy one or two high quality media disks and test them. If they burn ok, then it's the media. If not, then it's probably the drive, although most likely it's the media.

[kain821]

thanks for the swift response. I reviewed the dvd media section but I'm still clueless as to which media would work better over others. I understand there isn't a "best" media but a suggestion would be suffice.

thanks for your help and your patience

[Bob W]

Everyone here has been saying that there are problems with Nero version 6 so why not go back to version 5.5 (I think that's right). I wouldn't know because I could never get the program to install on three different computers.

Also maybe consider using RecordNow Max which seems to work for me on three different DVD burners?

[dh]

I have experienced the same problem before as yours.
You have to test different brands of media yourself and find out which of them are suitable for your DVD recorder.
I don't think it is the problem of burning software.