VideoHelp Forum




+ Reply to Thread
Results 1 to 9 of 9
  1. I recently tried burning on a 4x dvdr, and at first Alcohol 120% showed that it was going to burn at 4x... then all of a sudden the speed dropped to 2x... has this happened to anyone? If there's a way to correct this, please let me know! The Sony is using firmware 2.0f and the media was Meritline 4x...

    TIA!
    Quote Quote  
  2. That happened to me after I updated the firmware from the original to 1.0f. The drive never would burn at 4x after that no matter what brand of media I bought. A few weeks after that the drive flat out died.
    Quote Quote  
  3. Member
    Join Date
    May 2003
    Location
    United Kingdom
    Search Comp PM
    its probably the media ....... what is the manufacturers id ....... if its ritek then thats the problem the sony dont like ritek 4x try a different brant i can burn mirror media platinum at 4x but not ritek 4x on my sony dru500a
    Quote Quote  
  4. ahhhh okay...

    also, what's the difference in the color of the burn side of dvdr's? does it make a difference in how good something will burn, or what players can read them or anything like that?
    Quote Quote  
  5. Member
    Join Date
    Dec 2002
    Location
    United States
    Search Comp PM
    The later Sony firmware releases are known to be very conservative with burn speeds (whether this actually results in better burns or not seems to be unknown). Many people have seen burn speeds drop in the 2.0x releases. I have a DRU-500AX so I can't go below 2.0c anyway. So I'm sticking with 2.0f and hoping that I'm getting more reliable discs in exchange for the lower speeds.
    Quote Quote  
  6. well if buring at 2x proves to yield more consistent burns than 4x, I take it!
    Quote Quote  
  7. Member
    Join Date
    Dec 2002
    Location
    Belgium
    Search Comp PM
    Yeps, it's the media.
    My Princo -R 4x were written in 15 minutes, even on-the-fly.
    But the OptoDisc -R 4x dropped speed at 50% and it took 21 minutes to finish the disc.

    Nonetheless, the OptoDisc's are by far better than the Princo's.
    Sony DRU-500A v1.0d
    Toshiba SD-M1302 v1006
    Philips DVDR885P v1.7/8
    Quote Quote  
  8. I just bought a 50pk of Verbatim DataLife plus 4x -r's listed here. https://www.videohelp.com/dvdmedia.php?selectmedia=185

    It seems like everybody and their brother can get this to work on the 500a (2.0f) but me. Nero (latest version) says it's burning at 4x but it takes a full half hour (or slightly more) for a full disc to burn.

    Any ideas?
    Quote Quote  
  9. try proper ritek 4x they,re excellent ive never had a problem with 2.0f 15 minutes every time and no play back problems
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!