VideoHelp Forum




+ Reply to Thread
Results 1 to 6 of 6
  1. Member bakonfreek's Avatar
    Join Date
    Aug 2012
    Location
    A Corn Field In Iowa
    Search Comp PM
    Is it in theory possible to convert an audio recording of an analog video signal to a digital video file without using a capture card? I already know that my TV can convert the audio to a picture when I plug the audio out from my computer to the video in on the TV, but I was wondering if this would be possible without the use of a capture card.

    I did find that the higher I had the bit rate, sampling rate, and bit depth set, the better the picture came through. As well, having a louder file also made a better picture (until I ran into clipping which had some interesting effects).

    No biggie if it's not possible, I am just a bit curious and I don't have work tomorrow so I was just messing with data streams.
    Quote Quote  
  2. Banned
    Join Date
    Oct 2014
    Location
    Northern California
    Search PM
    Originally Posted by bakonfreek View Post
    Is it in theory possible to convert an audio recording of an analog video signal to a digital video file without using a capture card?
    Think about it, the bandwidth of an analog SD video signal is somewhere between 4 and 6 MHz (depending on video system and version) now compare that to the bandwidth of an audio recording.

    Last edited by newpball; 11th Jun 2015 at 01:47.
    Quote Quote  
  3. Member bakonfreek's Avatar
    Join Date
    Aug 2012
    Location
    A Corn Field In Iowa
    Search Comp PM
    It seemed to work on my TV, but it only works on my shitty Trinitron (I get nothing on my HD Vizio TV...no surprise there).
    Quote Quote  
  4. Originally Posted by bakonfreek View Post
    Is it in theory possible to convert an audio recording of an analog video signal to a digital video file without using a capture card? I already know that my TV can convert the audio to a picture when I plug the audio out from my computer to the video in on the TV, but I was wondering if this would be possible without the use of a capture card.

    I did find that the higher I had the bit rate, sampling rate, and bit depth set, the better the picture came through. As well, having a louder file also made a better picture (until I ran into clipping which had some interesting effects).

    No biggie if it's not possible, I am just a bit curious and I don't have work tomorrow so I was just messing with data streams.
    Well - if you can expand time then yes, or if resolution like 1x576(480) suit your needs then answer is also yes.
    Horizontal sync frequency fit in audio bandwidth.
    Using 2 channels at the same time (and additional simple electronic) you may extend bandwidth twice... but still it will be limited resolution (maybe 3 pixels on 576(480) lines).
    Last edited by pandy; 11th Jun 2015 at 06:03.
    Quote Quote  
  5. Member Cornucopia's Avatar
    Join Date
    Oct 2001
    Location
    Deep in the Heart of Texas
    Search PM
    Not only is it possible in theory, but that exactly what was done with the D2 video format (c.1987). It was a composite signal that was sampled as-is in time, just like an audio signal.
    But as has already been pointed out to you, the sample rate necessary for doing this properly & with good quality is 13.5MHz* for SD video (luma) and 74.25MHz for HD (luma).

    Scott

    *Note that this is >280x the rate of digitizing audio!
    Last edited by Cornucopia; 11th Jun 2015 at 03:33.
    Quote Quote  
  6. Formerly 'vaporeon800' Brad's Avatar
    Join Date
    Apr 2001
    Location
    Vancouver, Canada
    Search PM
    Somewhat OT but since you seem interested in this sort of thing: with a 28Mhz capture card, a guy called happycube continues to refine software decoding of LaserDisc players' raw RF output.

    http://forum.lddb.com/viewtopic.php?f=32&t=2671
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!