Bdmv problem in ps3 slim

[xavierrrr]

I encounter a small problem with my newly burned bd-r in ps3 slim. When I play it I see only a blank screen and there is only audio. I do not see any avc stream. What did I wrong. This is an information from bd rebuilder

[14:07:21] BD Rebuilder v0.32.03 (beta)
- Source: KNOWING
- Input BD size: 30.83 GB
- Approximate total content: [02:01:29.282]
- Target BD size: 22.66 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[14:07:21] PHASE ONE, Encoding
- [14:07:21] Extracting A/V streams [VID_00002]
- [14:49:38] Reencoding: VID_00002 (1 of 1)
- [14:49:38] Collecting video information
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 174,768 frames
- Bitrate: 20,660 Kbs
- [14:49:39] Reencoding: VID_00002, Pass 1 of 2
- [14:49:42] Reencoding: VID_00002, Pass 2 of 2
- [19:56:14] Video Encode complete
- [19:56:14] Reencoding audio tracks (if req'd)
- [19:56:14] Multiplexing M2TS
[20:30:47]PHASE ONE complete
[20:30:47]PHASE TWO - Rebuild Started
- [20:30:47] Rebuilding BD file Structure
- Failed in attempt to multiplex: MUX_MOVIE_ONLY.meta
-
[20:42:34] - Failed to REBUILD
-----------------------
[21:23:42] BD Rebuilder v0.32.03 (beta)
- Source: KNOWING
- Input BD size: 30.83 GB
- Approximate total content: [02:01:29.282]
- Target BD size: 22.66 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
- Resuming from previously started job.
[21:23:48] PHASE ONE, Encoding
[21:23:48]PHASE ONE complete
[21:23:48]PHASE TWO - Rebuild Started
- [21:23:48] Rebuilding BD file Structure
[22:21:06] - Encode and Rebuild complete
[22:21:06]JOB: KNOWING finished.

Cheers

It plays with no problem on my laptop

[Baldrick]

Moving you to our blu-ray backup section.

[xavierrrr]

It is additional information to this threat.

General #0
ID : 1
Complete name : L:\BDMV\STREAM\00000.m2ts
Format : BluRay Video
Format/Family : MPEG-2
File size : 21.8 GiB
PlayTime : 10ms

Video #0
ID : 4113 (0x1011)
MenuID : 1 (0x1)
Codec : AVC
Codec/Family : AVC
Codec/Info : MPEG-4 AVC
Codec profile : Main@L4.1
Codec settings, CABAC : Yes
Bit rate : 20.7 Mbps
Nominal bit rate : 20.7 Mbps
Width : 1920 pixels
Height : 1080 pixels
Display Aspect ratio : 16/9
Frame rate : 23.976 fps
Chroma : 4:2:0
Interlacement : Progressive
Writing library : x264 - core 85 r1442kGIT 781d300
Encoding settings : cabac=1 / ref=1 / deblock=0:0:0 / analyse=0:0 / me=dia / subme=0 / psy=1 / psy_rd=0.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=3 / sliced_threads=0 / slices=4 / nr=0 / decimate=1 / mbaff=0 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=0 / b_bias=0 / direct=1 / wpredb=1 / wpredp=0 / keyint=24 / keyint_min=1 / scenecut=0 / intra_refresh=0 / rc=abr / mbtree=0 / bitrate=20660 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=51 / qpstep=4 / ip_ratio=1.10 / pb_ratio=1.10 / aq=0 / pulldown=

Audio #0
ID : 4352 (0x1100)
MenuID : 1 (0x1)
Codec : DTS-HD
PlayTime : 10ms
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz
Resolution : 24 bits
Language : English

Ps3 recognizes bd as a "bdmv bd-r" and start playing it instantly. I can hear the audio track but there is no video stream (screen is black). I was looking on the INTERNET for any information about this problem but I couldn't find any correct answer. Reference frames are ok.
I want to mention that I picked up to copy only movie from my blue ray film. I used bd rebuilder and img burn.

Please help me with this problem. What I have done wrong?