I have a dvd that was made from a VHS tape. The reds are way to red and cause a blurring effect on anything that is red. Is it possible to somehow fix the color on the dvd? I no longer have the VHS so all I have to work with is the dvd, and the file on my PC I took back off the dvd. Looking for preferably a free way of doing this if that is possible as well
+ Reply to Thread
Results 1 to 11 of 11
-
What We Do In Life, Echoes In Eternity....
-
You can also use virtualdub's filter's to adjust colour correction's .
Filter's can be "daisy chained" if needed , though encoding will take longer .
Preview alway's available .
From vdub , it's frameserve to bbmpeg and encode to mpeg2 (various tweak's as well)
It's a free method . -
Possible to post a frame?
Recommends: Kiva.org - Loans that change lives.
http://www.kiva.org/about -
Here's a few captures
hmmm, they don't seem so bad now. Maybe it was just the tv or dvd player that caused it. I'll have to try my other tv adn dvd player.
Also, could tmpgenc's Trial version allow me to fix the color?What We Do In Life, Echoes In Eternity.... -
The tv did it. I have an old tv that does that. Turn down the saturation, it'll go away.
Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
The reds above are still pretty noisy. Lotta noise everywhere, in fact (look at the boy's exposed arm and elbow, and flesh shadow areas). I've read that the red (lower) color spectrum during recording is most affected by (a) poor or inappropriate cables. My Monster cables used to produce this red problem, as well as murky cyan gunk in shadows. The problem went away when I threw out my Monster stuff. (b) Some VHS tape brands had nosie in this area. Sony VHS tapes of every quality had this irritating defect, as well as the low-grade tapes from other brands. (c) Low voltage in your system -- too many components on the same circuit -- definitely produces this problem, though it's usually also accompanied by severe color bleeding. I don't see too much of it in this capture, so I'm going to conjecture it was caused by either the cables, the tape, or both.
Vdub and Avisynth can take some deblocking filters that might help. They're tricky to set up, but might be helpful. You're limited to methods you can use, because your "master" is already MPEG, but maybe someone here can offer more tips on a fix.Last edited by sanlyn; 19th Mar 2014 at 00:47.
-
Originally Posted by sanlyn
-
Yes, edDV, I'd say it happens a lot, especially at slow VHS speeds. Or with an underpowered input signal. However, it was REALLY bad with my Monster stuff, especially their Series 3 S-Video wire. Yes, a lot of it went away with better cables. No, not all of it. But a lot. As with everything VHS, your mileage may vary .
Last edited by sanlyn; 19th Mar 2014 at 00:47.
Similar Threads
-
Womble MPEG Video Wizard DVD is re-encoding video, claiming not to (FIXED)
By Brad in forum Authoring (DVD)Replies: 11Last Post: 2nd Mar 2012, 20:28 -
Reds look wrong for Rec.709
By Anonymous344 in forum Newbie / General discussionsReplies: 11Last Post: 23rd Apr 2011, 18:14 -
VHS capture : red/blue lines
By pastapesto in forum Capturing and VCRReplies: 0Last Post: 24th May 2010, 05:32 -
I need a genuis!!! Heavily red tinted or red hue.
By mikekrauser in forum Authoring (DVD)Replies: 4Last Post: 16th Aug 2009, 19:51 -
VHS tape displays red saturation during normal playback only
By mlong30 in forum Capturing and VCRReplies: 2Last Post: 25th Oct 2008, 13:11