CCE produces junky purple video

[tonemgub]

I give it an avi that works with tmpgenc but it produces video covered in purple! What am I doing wrong?

[guns1inger]

Is your version of CCE demo or registered ?

How are you feeding the avi into CCE ? Are you loading it directly, or frameserving ?

What does G-Spot say about your source ?

[tonemgub]

Demo version. Tried using AVS and directly from AVI, both give same result.
Gspot exported file:

--- File Information ---
File Name: Family Guy - Stewie Griffin the Untold Story.avi
File Name (with full path): C:\shows\Family Guy - Stewie Griffin the Untold Story.avi
File Size (in bytes): 731,527,168

--- Container Information ---
Base Type (e.g "AVI"): AVI(.AVI)
Subtype (e.g "OpenDML"): OpenDML (AVI v2.0),
Interleave (in ms): 42
Preload (in ms): 504
Audio alignment("split across interleaves"): Split
Total System Bitrate (kbps): 0
Bytes Missing (if any): 0
Number of Audio Streams: 1

--- Video Information ---
Video Codec Type(e.g. "DIV3"): xvid
Video Codec Name(e.g. "DivX 3, Low-Motion"): XviD
Video Codec Status(e.g. "Codec Is Installed"): Codec(s) are Installed
Duration (hh:mms): 01:28:19
Frame Count: 127055
Frame Width (pixels): 512
Frame Height (pixels): 384
Frame Aspect Ratio (e.g "1.3333"):
Frame Aspect Ratio (e.g. "4:3"):
Pixel Aspect Ratio ("SAR"):
Display Aspect Ratio ("DAR"): 1.333
Frames Per Second: ***ERROR***
Video Bitrate (kbps): 970
MPEG-4 ("MPEG-4" or ""): MPEG-4
B-VOP ("B-VOP" or ""): B-VOP
QPel ("QPel" or ""):
GMC ("GMC" or ""):
H264 ("H264" or ""):

MPEG-2 ("MPEG-2" or ""):
Interlaced ("I/L" or ""):
Progressive ("Prog" or ""):
Top Frame First ("TFF" or ""):
Bottom Frame First ("BFF" or ""):
3:2 Pulldown ("3:2" or ""):
Picture-per-field ("PPF" or ""):

- Aspect Ratio Related:

Broadcast standard: "PAL" (else blank)
Broadcast standard: "NTSC" (else blank)
src:"VCD", "SVCD", "CVD", or "DVD (else blank):
Instructions to convert to VCD, first part:
Instructions to convert to VCD, second part:
Instructions to convert to SVCD, first part:
Instructions to convert to SVCD, second part:
Instructions to convert to CVD, first part:
Instructions to convert to CVD, second part:
Instructions to convert to DVD, first part:
Instructions to convert to DVD, second part:
Instructions to convert to AVI, first part:
Instructions to convert to AVI, second part:

--- Audio Information ---
MPEG Stream ID (e.g. "0xbd"):
MPEG VOB file Substream(e.g. "0x80"):
Audio Codec (e.g. "AC3"): 0x0055(MP3, ISO) MPEG-1 Layer 3
Audio Codec Status (e.g. "Codec Is Installed"): Codec(s) are Installed
Audio Sample Rate (Hz): 48000
Audio Bitrate(kbps): 128
Audio Bitrate Type ("CBR" or "VBR"): CBR
Audio Channel Count (e.g. "2" for stereo): 2

[guns1inger]

Can you post the contents of the AVS script (don't need path and file names though).

Also, which version of CCE is it ?

[tonemgub]

CCE SP trial version 2.70.01.03

-----------------
avisource("c:\shows\family guy - stewie griffin the untold story.avi")
trim(0,800)