VideoHelp Forum




+ Reply to Thread
Results 1 to 5 of 5
  1. 8th Aug 2005 15:52 #1
    bugande
    bugande is offline
    Member
    Join Date
    May 2001
    Search Comp PM
    I have an epson r200 and when powered on the green power light goes off then the ink light and paper light flash on and off. The printer will not respond to anything I try to do. Any help would be great. Thanks.
    Quote Quote  
  2. 8th Aug 2005 16:00 #2
    thevoelk
    thevoelk is offline
    Member thevoelk's Avatar
    Join Date
    Sep 2004
    Location
    Forest Hill, MD
    Search Comp PM
    This is probably a very stupid question, and I in no way mean to attempt to insult your intelligence, but do your cartridges have sort of sticky covering the nozzle? And if so, did you remove it? I got a CIS set that I had to pull these off of.
    Quote Quote  
  3. 8th Aug 2005 16:07 #3
    bugande
    bugande is offline
    Member
    Join Date
    May 2001
    Search Comp PM
    No problem, the carts are seated properly so that is not the problem. Thank.
    Quote Quote  
  4. 8th Aug 2005 16:55 #4
    Prot
    Prot is offline
    Member Prot's Avatar
    Join Date
    Dec 2003
    Location
    Oregon
    Search Comp PM
    Troubleshooting part of manual says the cd/dvd tray was left open when the printer was turned on or you tried to print.
    Try pulling it down, then back into the regular position. Make sure it clicks back into place.
    TANSTAAFL
    Quote Quote  
  5. 8th Aug 2005 17:36 #5
    stiltman
    stiltman is offline
    Hello Ladies stiltman's Avatar
    Join Date
    Jul 2003
    Location
    Studio 54
    Search Comp PM
    Originally Posted by Prot
    Troubleshooting part of manual says the cd/dvd tray was left open when the printer was turned on or you tried to print.
    Try pulling it down, then back into the regular position. Make sure it clicks back into place.
    Yep, just gonna say that...Stupidest thing....the CD/DVD tray has to be up when you power it on...Dumb!
    tgpo famous MAC commercial, You be the judge?
    Originally Posted by jagabo
    I use the FixEverythingThat'sWrongWithThisVideo() filter. Works perfectly every time.
    Quote Quote  



Similar Threads

« Previous Thread | Next Thread »
Visit our sponsor! Try DVDFab and backup Blu-rays!