Audio Sync Problem

[chloe555]

Hi
Just burnt my first DVD with help from this site and all went really well .
Only problem was when I play the film on my dvd player the film gets about half way and the lip sync goes completely ......any suggestions please.

Many Thnaks

Great site.............

[FulciLives]

The solution to your problem lies in the details.

For instance use Gspot to get as much detail about the original A/V file you are attempting to convert. Do a screen grab of the results and post it here.

Also please go into as much detail as possible as to the methods you used in your attempt to convert this file to a DVD disc.

If you used a guide please link to the guide and if you did anything differently than what the guide says to do please make an effert to point that out.

Once you do that I am sure that someone will be able to offer you some real advice on how to fix your problem.

- John "FulciLives" Coleman

[chloe555]

hi

Think I may have found the problem.... When I inputted the data from Gspot into ffmpeggui I didnt input the correct data so this may have caused the problem . So ill try again.

thanks

[johns0]

I had the same type of problem with audio going out of sync using ffmpeggui,i found that when the audio was 44.1 khz ffmpeggui would put it out of sync when changing it to 48khz ac3,changing it to 48khz in goldwave fixed the problem.