VideoHelp Forum




+ Reply to Thread
Results 1 to 2 of 2
  1. Been having ALOT of ghosting troubles off my Panny E50 when my Pacific 1002W was plugged into it. The actual ghost was of the 1002Ws image, meaning if I recorded from AV2, id get the ghost as well

    After alot of messing, here is the solution if anyone is having ghosting problems.

    Equipment needed: 2 Fully Wired scart leads.

    Steps:

    1) Plug scart lead from TV to panny into AV1 on panny.

    2) Plug scart lead from Pacific 1002W (or your DVD player model) into AV2.

    3) On Remote:
    a) Functions;

    4) Then on screen display:
    a) SETUP
    b)CONNECTION
    c)AV1 / AV2 Settings

    5) Now set AV1 Output and AV2 Input to both RGB.

    This not only instantly solved the ghosting, but gave me a sharper picture and more vibrant colours.

    Sorry if you already knew this but I did a search and couldnt find anything, I typed this up for searching reference for people in the future.

    PS. This may only work on PAL set ups.
    Quote Quote  
  2. I dont have the above problem but..

    I noticed that when I recorded Satellite program with Panny E80 and Tv set using channel 3 (TV and recorder) I got some interference that recorded on the disc.
    By (accident?) playing around I set recorder to L1 and problem solved..
    clean transmission.
    Perhaps my wiring (cables)not hooked up properly.
    Pehaps the manual does refer to the use of L1 like this.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!