problems with my dru 510a

[SIRCOOKS]

what does this mean

writing error
Cmd: 42, Scene:3, ASC:12,ASC

ive been getting this message for a while now, and hhave been turning out coasters at a regular capacity.....can anyone help

[disturbed1]

Sense 03 ASC 12 ASCQ 00

Address Mark Not Found For Id Field

Means source media error.


Most ASPI error codes that start with Sense 03, will lead to Source media error codes. A few are temp, and buffer underrun errors.

One of two things can cause this, cheap media, and/or weak laser.

[handyguy]

why don't you try SONY media? you didn't give any specs.

[SIRCOOKS]

ive been using this same media for some time now, how is it that it can be messing up......also if my lasers weak what do i do

[disturbed1]

ive been using this same media for some time now, how is it that it can be messing up......also if my lasers weak what do i do

Maybe a cleaning will help out.

Also, media can have a bad batch once in a while. If your using cheap media, that likelyhood is even higher.

To trouble shoot, clean your laser, try again. If that doesn't work, run to the store and grab some TDK, or FujiFilm media.

If the TDK and Fuji media still won't burn, send in the drive for repair.

TDK is either RitekG04, TDK, or Maxell media, Fuji is either RitekG04, ProsdicS03, or Tayio Yuden. TDK DVD+R is Ricoh media.

[SIRCOOKS]

cool, ill have to physically open the burner and softly wipe the lens..thats no rob though, i just dont wanna have to go a while without the burner...holla back

[disturbed1]

Keep us posted to the outcome of your cleaning.

[JohnnyCNote]

One of two things can cause this, cheap media, and/or weak laser.

Re the weak laser: would that explain why my DRU 500A would write CD-RW's but not CR's or anything else? Does the laser operate at differing intensities depending on the media?

I've posted more details in another thread, https://www.videohelp.com/forum/viewtopic.php?t=194063. Any suggestions would be greatly appreciated....

[SIRCOOKS]

is it aiight if i wopen up my burner, is there a guide to properly show me how to...holla back

[SIRCOOKS]

guys im still getting this error, now its saying Cmd: 42,Scene:3,ASC:12,ASCQ:8...WHAT the hell does this mean, ive tried everything...holla back

[tomames5]

Writer : Verbatim VBTDVRW1A (NEC DVD+RW ND 1000A)
Burn with TMPGenc DVD Author 1.5...(gave up on NERO, NONE of the discs burned with it work in my standalone players).
Rip with DVDShrink 3.0

This has become a recurring problem. I rip the disc then go to burn with TMPGenc DVD Author and during the leadin write I get the following error:

Cmd:42, Scene:3, ASC:115, ASCQ:3
Writing Errror

And just now, it got all the way to the leadout and gives this error:

Cmd:91, Scene:0, ASC:0, ASCQ:0
Internal SCSI Error

What could this mean? I show NO errors or conflicts on my PC, and this has started to happen every time I try and burn a disc. I have tried Maxell DVD+R media and get this error each time I put it in the drive. Less frequent with Philips media, Memorex media, and TDK.
HELP! please!

[handyguy]

" I have tried Maxell DVD+R media and get this error each time I put it in the drive. Less frequent with Philips media, Memorex media, and TDK. "

Looks as if you need better media.Did you even try my suggestion to use Sony media? Sony writer use Sony media. Pioneer writer use Pioneer media.

Or uninstall your writer from System & restart your computer & it should redetect it. ALso reinstall your ASPI layer.