How to enable dma? "desperate"

[Espen]

I have tried to solv this problem for over 10 hours now and start to get a bit desperate. I can't get my burner back to dma mode what ever I do. It's still in this f***ing pio mode.

I have tried the following.

Upgrade BIOS
Change firmware
Upgrade ASPI
Upgrade chipset
Change IDE cable
Deleted IDE canal

Nothing seems to help

I beginn to wonder if this problem is impossible to solve!

[enderst]

Got this from another forum and, this is assuming you're using xp. Seems to happen with xp when read errors occur.

Open registry editor
Go to "HKEY_LOCAL_MACHINE\SYSTEMS\CurrentControlSet\Cont rol\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}"

The Default Value should be "IDE ATA/ATAPI controllers"
Go to "0001" key if your device is on Primary IDE Chanel or "0002" if your device is on Secondary IDE channel and change the MasterDeviceTimingModeAllowed or SlaveDeviceTimingModeAllowed to 0xffffffff depending if your device is master or slave close registry editor.

Go to device manager select "IDE ATA/ATAPI controllers" and the corresponding IDE chanel go to "Advanced Settings" Tab and Set Transfer Mode to PIO and then to DMA if available again.
That's should do it.

Good Luck

[Sony]

Dont know why but before i buy dvd my cdrw lg changed in xp from mword ultra dma to pio... I just deinstalled it from device manager & find it again... Windows set up dma mode again... 3 or 4 month past & no problem....

Sorry for my bad "inglish"

[bottle-necked]

Your "inglish" is just fine.

[andie41]

As Sony wrote, you need to remove the IDE controller entry from device manager, reboot and XP will add new hardware and then reboot again and it will(should) come up in DMA mode. If there are problems writing to or from the drive, XP will monitor and eventually lock it into PIO mode.

[shaynew]

Hi all.

I've just tried the registry hack upping the acceptable # of errors.
Then I tried removing the Secondary IDE Channel in device manager and rebooting twice,
then removing each of the two Intel IDE Controllers, and rebooting twice for each controller removed.
I also set the writers to DMA if available again on the second IDE channel and rebooting again.

Nothing helps. My A06 is still in PIO land.

*EDIT*

Problem solved.

Found this link over at doom9.org and it works for my Dell 8300 at least.

http://support.dell.com/filelib/format.aspx?releaseid=r53986

Try this utility. Always worked for me when I couldn't get DMA enabled.

--Shayne

[andie41]

Removing the IDE controller and rebooting has worked for me, but my drive's problem was temporary, nothing really wrong with the drive. Perhaps there is a continuing problem with the A06 and errors continue. Is DMA working on your Primary IDE?

[bdgriff]

This has always worked for me also...Intel application accelerator, go to the intel site or just google search...

[shaynew]

andie41 said:

Removing the IDE controller and rebooting has worked for me, but my drive's problem was temporary, nothing really wrong with the drive. Perhaps there is a continuing problem with the A06 and errors continue. Is DMA working on your Primary IDE?

DMA is fine in the primary IDE channel which has 2 HDs. Secondary channel has a DVD-ROM drive master and the A06 slave. I never even put a disk in the A06 in almost all those times I was reinstalling drivers/devices. So I don't know how it could be finding new read/write problems. Besides I did the registry hack to make XP insensitive to read errors first before anything else.

--Shayne

[Espen]

Shaynew: Glad to see you find a solution. I have the exact same settings as you: DMA is fine in the primary IDE channel which has 2 HDs. Secondary channel has a DVD-ROM drive master and the A06(I'm Using Philips dvdrw 228) slave. As I wrote earlier I have Tried to remove the IDE controller entry from device manager, but didn't help. Have also tried Intel application accelerator, didn't help.

Now I will test the prog at this link: http://support.dell.com/filelib/format.aspx?releaseid=r53986

And I pray for it to work........

[paulstamat]

Hmm

[Espen]

No NO NO I remeber I all ready download and tried this prog yesterday.

Guees what, it didn't work!

I don't running a Dell system, so that may be why it dosen't work for me

[cdb]

Have you tried the following? See instructions for enabling DMA for hard drives and CD/DVD-RW drives under WinXP at:

http://www.ati.com/support/faq/winxp/winxpconfigenabledma.html

[Espen]

Yes, that was one of the first things I tried. Should I have to buy I new burner to solve the probem?

Aggh I'm not even sure if it's the burner cause the problem. It may even be related to the motherboard.....

[tompika]

You got Service Pack 1 installed?

[Espen]

Well I reformat my harddisk a while ago and I don't think I have insatlled any service packs since. That may maybe cause this dma problem?

[tompika]

Well I reformat my harddisk a while ago and I don't think I have insatlled any service packs since. That may maybe cause this dma problem?

Well, I had a similiar problem with a new system until I installed SP1 for WinXP (Windows Update).

[lobstamon]

For some (really troublesome Mo Boards) set powermanagement to "APCI" in Bios(DEL key at bootup)A 80 pin 66/100 IDE cable
for UDMA speeds, DMA set for the Harddrive (I assume you already set the DVD drive to DMA if avail.)<If not, you need to DL IDE driver from the MoBo Mfg for your OS, (the chipset provider driver may not work as the MoBo MFG sometimes do strange mods to std. chips).
Now remove/reinstall IDE Primary & secondary drivers in device manager(Controlpannel/System/Hardware/Devicemanager/IDE/ATAPI controlers)& PCI IDE UDMA controlers,install new drivers & I think you`ll like what you get (after reboot).

[lobstamon]

For some (really troublesome Mo Boards) set powermanagement to "APCI" in Bios(DEL key at bootup)A 80 pin 66/100 IDE cable
for UDMA speeds, DMA set for the Harddrive (I assume you already set the DVD drive to DMA if avail.)<If not, you need to DL IDE driver from the MoBo Mfg for your OS, (the chipset provider driver may not work as the MoBo MFG sometimes do strange mods to std. chips).
Now remove/reinstall IDE Primary & secondary drivers in device manager(Controlpannel/System/Hardware/Devicemanager/IDE/ATAPI controlers)& PCI IDE UDMA controlers,install new drivers & I think you`ll like what you get (after reboot).

[Espen]

Tried to upgrade to service pack 1. And no change

I will post the report Intal Application Accelerator gave me.

My burner is located as secodary master, if you look there it says
Cable Type (Device): 40 Conductor
Cable Type (Host): 40 Conductor

On the other 3 units(2hdd and 1dvd-rom) it says
Cable Type (Device): 80 Conductor
Cable Type (Host): 80 Conductor
Strange?

Well People take a look at the report and see if you can find any problems,plzzzzzzz.......


Intel(R) Application Accelerator, 2.3.0.2160
den 30 december 2003 03:02:57 (Local)
den 30 december 2003 02:02:57 (GMT)

Operating System
Windows XP (Build 5.1.2600, Service Pack 1)

Platform Information
Processor Type: Intel(R) Pentium(R) 4 Processor
Processor level: Family 15
Processor Revision: Model 2 Stepping 7
Active Processor Mask: 1
Number of Processors: 1

Controller Information
IDE Controller: Intel(R) 82801DB Ultra ATA Controller, ICH4
Storage Kit Build(s): 2.3.0.2164,
Storage Kit Installed: 2.3.0.2164
Driver Build: Intel Application Accelerator Driver
Driver Version: 2.3.0.2160
IDE Controller Tri-State: IDE Controller enabled
PIO Mode Support: 0 - 2 - 3 - 4
DMA SW Mode Support: 2
DMA MW Mode Support: 1 - 2
UDMA Mode Support: 0 - 1 - 2 - 3 - 4 - 5
Disk Timeout Value: Default
CDROM Timeout Value: Default
CD Audio Timeout Value: Default
UDMA on 80 conductor cable only: Default, Disabled
Flush Enable: Default, Disabled
Ping Pong Enable: Enabled

Channel Information
Primary Channel
No Data
Secondary Channel
No Data

Device Information
Primary Master: ST3120026A
Model: ST3120026A
Firmware: 3.16
Device Type: ATA - Fixed
PIO Mode Support: 0 - 1 - 2 - 3 - 4
DMA SW Mode Support: No Support
DMA MW Mode Support: 0 - 1 - 2
UDMA Mode Support: 0 - 1 - 2 - 3 - 4 - 5
LBA (28-bit maximum): 0x0DF84758
LBA (48-bit maximum): 0x00000DF84758
CHS: 3FFF x 0010 x 003F
CHS Sectors: 0x00FBFC10
Disk Size (28-bit maximum): 111.8 GB (120,000,000,000 bytes)
Disk Size: 111 GB (120,000,000,000 bytes)
Default Transfer Mode: UDMA-5
Current Transfer Mode: UDMA-5
Transfer Mode Limit: No Limit
Cable Type (Device): 80 Conductor
Cable Type (Host): 80 Conductor
PIO PPE: Enabled
UDMA Control Register: Ultra DMA Mode Enabled
UDMA Timing Register: CT = 3 CLK / RP = 16 CLK
Base Clock: Ultra DMA 100 Timings
Auto-Acoustic Management: Minimum Acoustic Output
Dynamic APM on AC: Feature not supported by device.
Dynamic APM on Battery: Feature not supported by device.

Device Identify Data:
0 1 2 3 4 5 6 7
0 5A0C FF3F 37C8 1000 0000 0000 3F00 0000
8 0000 0000 4A33 3054 4B59 3146 2020 2020
16 2020 2020 2020 2020 0000 0040 0400 2E33
24 3631 2020 2020 5453 3133 3032 3230 4136
32 2020 2020 2020 2020 2020 2020 2020 2020
40 2020 2020 2020 2020 2020 2020 2020 1080
48 0000 002F 0000 0002 0002 0700 FF3F 1000
56 3F00 10FC FB00 1001 5847 F80D 0000 0700
64 0300 7800 7800 F000 7800 0000 0000 0000
72 0000 0000 0000 0000 0000 0000 0000 0000
80 7E00 1B00 6B34 017F 0340 6934 013E 0340
88 3F20 0000 0000 FEFE 0000 7B60 8080 0000
96 0000 0000 0000 0000 5847 F80D 0000 0000
104 0000 0000 0000 0000 0000 0000 0000 0000
112 0000 0000 0000 0000 0000 0000 0000 0000
120 0000 0000 0000 0000 0000 0000 0000 0000
128 0900 5847 F80D 5847 F80D 2020 0200 B642
136 0000 008A 063C 0A3C FFFF C607 0001 0008
144 F010 0010 0200 3000 0000 0000 0000 06FE
152 0000 0200 0000 0000 0000 0000 2200 0B00
160 0000 0000 0000 0000 0000 0000 0000 0000
168 0000 0000 0000 0000 0000 0000 0000 0000
176 0000 0000 0000 0000 0000 0000 0000 0000
184 0000 0000 0000 0000 0000 0000 0000 0000
192 0000 0000 0000 0000 0000 0000 0000 0000
200 0000 0000 0000 0000 0000 0000 0000 0000
208 0000 0000 0000 0000 0000 0000 0000 0000
216 0000 0000 0000 0000 0000 0000 0000 0000
224 0000 0000 0000 0000 0000 0000 0000 0000
232 0000 0000 0000 0000 0000 0000 0000 0000
240 0000 0000 0000 0000 0000 0000 0000 0000
248 0000 0000 0000 0000 0000 0000 0000 A5EC


Primary Slave: WDC WD1200BB-23CAA1
Model: WDC WD1200BB-23CAA1
Firmware: 17.07W17
Device Type: ATA - Fixed
PIO Mode Support: 0 - 1 - 2 - 3 - 4
DMA SW Mode Support: No Support
DMA MW Mode Support: 0 - 1 - 2
UDMA Mode Support: 0 - 1 - 2 - 3 - 4 - 5
LBA (28-bit maximum): 0x0DF94BB0
LBA (48-bit maximum): 0x00000DF94BB0
CHS: 3FFF x 0010 x 003F
CHS Sectors: 0x00FBFC10
Disk Size (28-bit maximum): 111.8 GB (120,034,123,776 bytes)
Disk Size: 111 GB (120,034,123,776 bytes)
Default Transfer Mode: UDMA-5
Current Transfer Mode: UDMA-5
Transfer Mode Limit: No Limit
Cable Type (Device): 80 Conductor
Cable Type (Host): 80 Conductor
PIO PPE: Enabled
UDMA Control Register: Ultra DMA Mode Enabled
UDMA Timing Register: CT = 3 CLK / RP = 16 CLK
Base Clock: Ultra DMA 100 Timings
Auto-Acoustic Management: Disabled
Dynamic APM on AC: Feature not supported by device.
Dynamic APM on Battery: Feature not supported by device.

Device Identify Data:
0 1 2 3 4 5 6 7
0 7A42 FF3F 0000 1000 00E1 5802 3F00 1000
8 0000 0E00 4457 572D 414D 4338 3632 3432
16 3238 0039 0000 0000 0300 0010 2800 3731
24 302E 5737 3731 4457 2043 4457 3231 3030
32 4242 322D 4333 4141 2031 2020 2020 2020
40 2020 2020 2020 2020 2020 2020 2020 1080
48 0000 002F 0140 8002 0000 0700 FF3F 1000
56 3F00 10FC FB00 1001 B04B F90D 0000 0700
64 0300 7800 7800 7800 7800 0000 0000 0000
72 0000 0000 0000 0000 0000 0000 0000 0000
80 3E00 0000 6B34 014B 0340 6934 0108 0340
88 3F20 0000 0000 0000 0000 006B FE80 0000
96 0000 0000 0000 0000 0000 0000 0000 0000
104 0000 0000 0000 0000 0000 0000 0000 0000
112 0000 0000 0000 0000 0000 0000 0000 0000
120 0000 0000 0000 0000 0000 0000 0000 0000
128 0900 0000 0000 0000 0000 2D00 0000 0000
136 0000 0000 0000 0000 0000 0000 0000 0100
144 0000 0000 0000 0000 0000 0000 0000 0000
152 0000 0000 0000 0000 0000 0000 0000 1B00
160 0000 0000 0000 0000 0000 0000 0000 0000
168 0000 0000 0000 0000 0000 0000 0000 0000
176 0000 0000 0000 0000 0000 0000 0000 0000
184 0000 0000 0000 0000 0000 0000 0000 0000
192 0000 0000 0000 0000 0000 0000 0000 0000
200 0000 0000 0000 0000 0000 0000 0000 0000
208 0000 0000 0000 0000 0000 0000 0000 0000
216 0000 0000 0000 0000 0000 0000 0000 0000
224 0000 0000 0000 0000 0000 0000 0000 0000
232 0000 0000 0000 0000 0000 0000 0000 0000
240 0000 0000 0000 0000 0000 0000 0000 0000
248 0000 0000 0000 0000 0000 0000 0000 A519


Secondary Master: PHILIPS DVDRW228
Model: PHILIPS DVDRW228
Firmware: 1.64
Device Type: ATAPI - Removable - CDROM
PIO Mode Support: 0 - 1 - 2 - 3 - 4
DMA SW Mode Support: 0 - 1 - 2
DMA MW Mode Support: 0 - 1 - 2
UDMA Mode Support: 0 - 1 - 2
Default Transfer Mode: UDMA-0
Current Transfer Mode: PIO-4
Transfer Mode Limit: UDMA-2
Cable Type (Device): 40 Conductor
Cable Type (Host): 40 Conductor
PIO PPE: Enabled
UDMA Control Register: Ultra DMA Mode Enabled
UDMA Timing Register: CT = 4 CLK / RP = 6 CLK
Base Clock: Ultra DMA 33 Timings
Auto-Acoustic Management: Feature not supported by device.
Dynamic APM on AC: Feature not supported by device.
Dynamic APM on Battery: Feature not supported by device.

Device Identify Data:
0 1 2 3 4 5 6 7
0 C085 0000 0000 0000 0000 0000 0000 0000
8 0000 0000 2020 2020 3620 4F56 3230 3534
16 4244 3130 3835 0036 0000 0000 0000 2E31
24 3436 2020 2020 4850 4C49 5049 2053 5644
32 5244 3257 3832 2020 2020 2020 2020 2020
40 2020 2020 2020 2020 2020 2020 2020 0000
48 0000 000F 0000 0002 0002 0600 0000 0000
56 0000 0000 0000 0000 0000 0000 0700 0700
64 0300 7800 7800 F000 7800 0000 0000 0000
72 0000 0000 0000 0000 0000 0000 0000 0000
80 1E00 0000 1842 0040 0040 1842 0000 0040
88 0701 0000 0000 0000 0000 0000 0000 0000
96 0000 0000 0000 0000 0000 0000 0000 0000
104 0000 0000 0000 0000 0000 0000 0000 0000
112 0000 0000 0000 0000 0000 0000 0000 0000
120 0000 0000 0000 0000 0000 0000 0000 0000
128 0000 0000 0000 0000 0000 0000 0000 0000
136 0000 0000 0000 0000 0000 0000 0000 0000
144 0000 0000 0000 0000 0000 0000 0000 0000
152 0000 0000 0000 0000 0000 0000 0000 0000
160 0000 0000 0000 0000 0000 0000 0000 0000
168 0000 0000 0000 0000 0000 0000 0000 0000
176 0000 0000 0000 0000 0000 0000 0000 0000
184 0000 0000 0000 0000 0000 0000 0000 0000
192 0000 0000 0000 0000 0000 0000 0000 0000
200 0000 0000 0000 0000 0000 0000 0000 0000
208 0000 0000 0000 0000 0000 0000 0000 0000
216 0000 0000 0000 0000 0000 0000 0000 0000
224 0000 0000 0000 0000 0000 0000 0000 0000
232 0000 0000 0000 0000 0000 0000 0000 0000
240 0000 0000 0000 0000 0000 0000 0000 0000
248 0000 0000 0000 0000 0000 0000 0000 0000


Secondary Slave: HL-DT-STDVD-ROM GDR8161B
Model: HL-DT-STDVD-ROM GDR8161B
Firmware: 0043
Device Type: ATAPI - Removable - CDROM
PIO Mode Support: 0 - 1 - 2 - 3 - 4
DMA SW Mode Support: 0 - 1 - 2
DMA MW Mode Support: 0 - 1 - 2
UDMA Mode Support: 0 - 1 - 2 - 3 - 4
Default Transfer Mode: UDMA-4
Current Transfer Mode: UDMA-4
Transfer Mode Limit: UDMA-4
Cable Type (Device): 80 Conductor
Cable Type (Host): 80 Conductor
PIO PPE: Enabled
UDMA Control Register: Ultra DMA Mode Enabled
UDMA Timing Register: CT = 2 CLK / RP = 8 CLK
Base Clock: Ultra DMA 66 Timings
Auto-Acoustic Management: Feature not supported by device.
Dynamic APM on AC: Feature not supported by device.
Dynamic APM on Battery: Feature not supported by device.

Device Identify Data:
0 1 2 3 4 5 6 7
0 C085 0000 0000 0000 0000 0000 0000 0000
8 0000 0000 2020 2020 2020 2020 2020 2020
16 2020 2020 2020 2020 0000 0000 0000 3030
24 3334 2020 2020 4C48 442D 2D54 5453 5644
32 2D44 4F52 204D 4447 3852 3631 4231 2020
40 2020 2020 2020 2020 2020 2020 2020 0000
48 0000 000F 0000 0002 0002 0600 0000 0000
56 0000 0000 0000 0000 0000 0000 0700 0700
64 0300 7800 7800 7800 7800 0000 0000 0000
72 0000 0000 0000 0000 0000 0000 0000 0000
80 0000 0000 0000 0000 0000 0000 0000 0000
88 1F10 0000 0000 0000 0000 0020 0000 0000
96 0000 0000 0000 0000 0000 0000 0000 0000
104 0000 0000 0000 0000 0000 0000 0000 0000
112 0000 0000 0000 0000 0000 0000 0000 0000
120 0000 0000 0000 0000 0000 0000 0000 0000
128 0000 0000 0000 0000 0000 0000 0000 0000
136 0000 0000 0000 0000 0000 0000 0000 0000
144 0000 0000 0000 0000 0000 0000 0000 0000
152 0000 0000 0000 0000 0000 0000 0000 0000
160 0000 0000 0000 0000 0000 0000 0000 0000
168 0000 0000 0000 0000 0000 0000 0000 0000
176 0000 0000 0000 0000 0000 0000 0000 0000
184 0000 0000 0000 0000 0000 0000 0000 0000
192 0000 0000 0000 0000 0000 0000 0000 0000
200 0000 0000 0000 0000 0000 0000 0000 0000
208 0000 0000 0000 0000 0000 0000 0000 0000
216 0000 0000 0000 0000 0000 0000 0000 0000
224 0000 0000 0000 0000 0000 0000 0000 0000
232 0000 0000 0000 0000 0000 0000 0000 0000
240 0000 0000 0000 0000 0000 0000 0000 0000
248 0000 0000 0000 0000 0000 0000 0000 0000


PCI Configuration
PCI Configuration Registers - Function 0 (PCI to ISA Bridge)
0 1 2 3 4 5 6 7 8 9 a b c d e f
0X: 86 80 cb 24 07 00 80 02 01 8a 01 01 00 00 00 00
1X: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
2X: 61 18 00 00 00 fc bf fe 00 00 00 00 14 10 67 02
3X: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
4X: 77 e7 33 e7 bb 00 00 00 0f 00 11 20 00 00 00 00
5X: 00 00 00 00 b8 37 00 00 00 00 00 00 00 00 00 00
6X: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
7X: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8X: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9X: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fX: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00

PCI Configuration Registers - Function 1 (IDE Interface)
0 1 2 3 4 5 6 7 8 9 a b c d e f
0X: 86 80 cb 24 07 00 80 02 01 8a 01 01 00 00 00 00
1X: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
2X: 61 18 00 00 00 fc bf fe 00 00 00 00 14 10 67 02
3X: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
4X: 77 e7 33 e7 bb 00 00 00 0f 00 11 20 00 00 00 00
5X: 00 00 00 00 b8 37 00 00 00 00 00 00 00 00 00 00
6X: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
7X: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8X: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9X: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fX: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00


Registry Data
SYSTEM\CurrentControlSet\Services\idechndr\Paramet ers
AtapiOnPrimary,REG_DWORD,ffffffff
AtapiOnSecondary,REG_DWORD,ffffffff
SecondaryMasterMode,REG_DWORD,ff2
SecondarySlaveMode,REG_DWORD,ff4
SymbolicReference,REG_DWORD,569b2eb9

System\CurrentControlSet\Services\Cdrom
DependOnGroup,REG_MULTI_SZ,SCSI miniport
ErrorControl,REG_DWORD,1
Group,REG_SZ,SCSI CDROM Class
Start,REG_DWORD,1
Tag,REG_DWORD,2
Type,REG_DWORD,1
DisplayName,REG_SZ,CD-ROM-drivrutin
ImagePath,REG_EXPAND_SZ,System32\DRIVERS\cdrom.sys
AutoRun,REG_DWORD,1
AutoRunAlwaysDisable,REG_MULTI_SZ,NEC MBR-7 ,NEC MBR-7.4 ,PIONEER CHANGR DRM-1804X,PIONEER CD-ROM DRM-6324X,PIONEER CD-ROM DRM-624X ,TORiSAN CD-ROM CDR_C36
System\CurrentControlSet\Services\Cdrom\Enum
0,REG_SZ,SCSI\CdRom&Ven_V386&Prod_STEALTH_DVD&Rev_ 1.0h\1&2afd7d61&3&000
Count,REG_DWORD,3
NextInstance,REG_DWORD,3
1,REG_SZ,IDE\CdRomPHILIPS_DVDRW228________________ ________1.64____\5&1c4517b&0&0.0.0
2,REG_SZ,IDE\CdRomHL-DT-ST_DVD-ROM_GDR8161B_______________0043____\5&1c4517b&0&0. 1.0

System\CurrentControlSet\Services\Disk
DependOnGroup,REG_MULTI_SZ,SCSI miniport
ErrorControl,REG_DWORD,1
Group,REG_SZ,SCSI Class
Start,REG_DWORD,0
Tag,REG_DWORD,2
Type,REG_DWORD,1
DisplayName,REG_SZ,Diskdrivrutin
ImagePath,REG_EXPAND_SZ,System32\DRIVERS\disk.sys
AutoRunAlwaysDisable,REG_MULTI_SZ,Brother RemovableDisk(U)
System\CurrentControlSet\Services\Disk\Enum
0,REG_SZ,IDE\DiskST3120026A_______________________ _______3.16____\5&2aa56add&0&0.0.0
Count,REG_DWORD,2
NextInstance,REG_DWORD,2
1,REG_SZ,IDE\DiskWDC_WD1200BB-23CAA1_____________________17.07W17\5&2aa56add&0&0 .1.0

System\CurrentControlSet\Services\Cdaudio
ErrorControl,REG_DWORD,0
Group,REG_SZ,Filter
Start,REG_DWORD,1
Tag,REG_DWORD,6
Type,REG_DWORD,1
System\CurrentControlSet\Services\Cdaudio\Enum
Count,REG_DWORD,0
NextInstance,REG_DWORD,0
INITSTARTFAILED,REG_DWORD,1

SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
Class,REG_SZ,hdc
,REG_SZ,IDE ATA/ATAPI-styrenheter
Icon,REG_SZ,-9
Installer32,REG_SZ,SysSetup.Dll,HdcClassInstaller
TroubleShooter-0,REG_SZ,hcp://help/tshoot/tsdrive.htm
SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\0000
InfPath,REG_SZ,oem21.inf
InfSection,REG_SZ,IdeBusDr_Inst
ProviderName,REG_SZ,Intel
DriverDateData,REG_BINARY,00402A7CDD68C201
DriverDate,REG_SZ,10-1-2002
DriverVersion,REG_SZ,2.3.0.2160
MatchingDeviceId,REG_SZ,pci\ven_8086&dev_24cb&cc_0 1018a
DriverDesc,REG_SZ,Intel(R) 82801DB Ultra ATA Controller
SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\0001
InfPath,REG_SZ,oem21.inf
InfSection,REG_SZ,IdeChnDr_Inst_primary
ProviderName,REG_SZ,Intel
DriverDateData,REG_BINARY,00402A7CDD68C201
DriverDate,REG_SZ,10-1-2002
DriverVersion,REG_SZ,2.3.0.2160
MatchingDeviceId,REG_SZ,i_primary_ide_channel
DriverDesc,REG_SZ,Primary IDE Channel
SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\0002
InfPath,REG_SZ,oem21.inf
InfSection,REG_SZ,IdeChnDr_Inst_secondary
ProviderName,REG_SZ,Intel
DriverDateData,REG_BINARY,00402A7CDD68C201
DriverDate,REG_SZ,10-1-2002
DriverVersion,REG_SZ,2.3.0.2160
MatchingDeviceId,REG_SZ,i_secondary_ide_channel
DriverDesc,REG_SZ,Secondary IDE Channel
SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\Properties

SYSTEM\CurrentControlSet\Enum\PCI
SYSTEM\CurrentControlSet\Enum\PCI\VEN_1013&DEV_600 3&SUBSYS_33575053&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_104C&DEV_802 0&SUBSYS_801015C5&REV_00
SYSTEM\CurrentControlSet\Enum\PCI\VEN_10DE&DEV_017 2&SUBSYS_87841462&REV_A3
SYSTEM\CurrentControlSet\Enum\PCI\VEN_10DE&DEV_025 0&SUBSYS_87251462&REV_A3
SYSTEM\CurrentControlSet\Enum\PCI\VEN_14F1&DEV_270 2&SUBSYS_200214F1&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_103 9&SUBSYS_02671014&REV_81
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_244 E&SUBSYS_00000000&REV_81
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C 0&SUBSYS_00000000&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C 2&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C 3&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C 4&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C 5&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C 7&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C B&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_24C D&SUBSYS_02671014&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_256 0&SUBSYS_00000000&REV_01
SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_256 1&SUBSYS_00000000&REV_01