VideoHelp Forum




+ Reply to Thread
Results 1 to 11 of 11
  1. Member
    Join Date
    Mar 2007
    Location
    United States
    Search Comp PM
    You know, the bullet going through the apple, the water drop falling into the water, etc... Other than spending tens of thousands of dollars of high speed cameras is there ANY way of capturing high frame rate video?
    Quote Quote  
  2. A very bright strobe light, and set your exposure time to as low as your camera can.
    Quote Quote  
  3. Member
    Join Date
    Mar 2007
    Location
    United States
    Search Comp PM
    well most cameras don't list shutter speeds as FPS, is there a chart or some other reference material to let me know how many FPS a certain setting will be? thanks.
    Quote Quote  
  4. Member
    Join Date
    Mar 2007
    Location
    United Kingdom
    Search Comp PM
    have you tried deinterlacing a 30fps dv-avi into 60fps and then using free fancy plugins to slow down the video? Just create a text file (e.g. with a text editor like notepad) with the following content:

    AVISource("Yourmovie.avi")
    separatefields


    Be sure to install AVIsynth beforehand though. Check out some examples near the bottom of the page http://www.100fps.com/
    Quote Quote  
  5. Member
    Join Date
    Mar 2004
    Location
    Texas, USA
    Search Comp PM
    NTSC video is always 30 FPS (well, 29.97 approximately), and PAL is always 25FPS. Shutter speed doesn't change that.

    Steve
    Quote Quote  
  6. Member
    Join Date
    Mar 2007
    Location
    United States
    Search Comp PM
    so nobody has figured out how to really do high FPS stuff on a budget?
    Quote Quote  
  7. Member
    Join Date
    Mar 2007
    Location
    United Kingdom
    Search Comp PM
    Check out some examples near the bottom of the page http://www.100fps.com/
    Quote Quote  
  8. Free Flying Soul liquid217's Avatar
    Join Date
    Feb 2002
    Location
    United States
    Search Comp PM
    If you use a fairly high shutter speed, you can probably get good results with this avisynth function.

    https://forum.videohelp.com/viewtopic.php?p=1533994#1533994
    Quote Quote  
  9. Member
    Join Date
    Mar 2007
    Location
    United States
    Search Comp PM
    ok well even though NTSC DV is shooting at 29.97fps and that cannot be changed changing the shutter speed should allow you to record fast moving people/objects with little to no blur, therefore helping the post production slowmo software to actually make something you can see. so even if you're going to be doing post production slow motion you should still film with a high shutter speed, correct?
    Quote Quote  
  10. Free Flying Soul liquid217's Avatar
    Join Date
    Feb 2002
    Location
    United States
    Search Comp PM
    The idea behind the use of mvtools and I would assume any other slow motion software like dynapel is that it will track the motion of the object and create generated frames that estimate where the object would be. If you camera has a fairly high shutter rate, that should minimize any blurring or ghosting, compared to a camera with a longer exposure time.
    As igor mentioned also, if you choose to use one of these software packages to make it appear slower, you should deinterlace that material.
    Quote Quote  
  11. Member
    Join Date
    Mar 2007
    Location
    United States
    Search Comp PM
    yeah I know all about deinterlacing. at first I was considering using one of the cameras from the studio I work at, but upon closer inspection I can save myself the trouble and risk of using a camera that doesn't belong to me, since my little Sony HC20 miniDV cam has an adjustable shutter setting.

    So here's what I'm going to try for some really nice slowmo stuff:
    *film at high noon, bright light
    *film at high shutter speed to reduce motion blurring
    *import and de-interlace footage
    *try one of the "slowmo" plugins/filters discussed

    I'll try to remember to post an example of how it came out once it's done. Thanks guys.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!