Did my new Pio DVR-111L go phffft? Solved. Yes it did.

[EAO]

So all was fine on my first 5 DVD DL backups using imageburn (and Nero for 5 SL's.) The DL media I am using is Verbatim MKM 001.

Then I tried backing up another DVD-ROM DL with Imgburn v2 and got the following messages depending on various tweaks I made on the VIDEO_TS folder when writing.

ECC Block Boundary
I/O Device Error
Power Calibration Area Error

So I transferred the VIDEO_TS folder to my wife's PC and Nero burned it just fine on her BenQ dw1620.

Went back to my PC.

The Pio is showing as UDMA4 and is primary master. (Remember it was working fine so I don't believe it is a cable or udma4 problem any) I uninstalled Nero and Imgburn and reinstalled. Made no difference.

For jollies I ran it through DVD shrink (unshrunk and kept the layer break) and had it go to Nero. (See Log one) Then I recaptured it with DVDFabDycypter to make certain it wasn't corrupted and ran it on a Fujifilm DL.

__________________________________________________ ________________________
__________________________________________________ ________________________

LOG ONE

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.01 (978), size=22528 bytes, created 7/18/1996 2:26:30 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b

Recorder: <PIONEER DVD-RW DVR-111L>Version: 8.26 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-111L atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3160023A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3250823A atapi Port 1 ID 0 DMA: On
DiskPeripheral : HDT722516DLAT80 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111L G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572332kB)
Free physical memory: 1234MB (1264072kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.8.2006
NeroAPI
3:51:52 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

3:51:52 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

3:51:52 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

3:51:52 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

3:51:52 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

3:51:52 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

3:51:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

3:51:52 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

3:51:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4005919 (890:12.19, 7824MB)

3:51:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

3:51:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-111L, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

3:51:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:51:56 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4005920 (4005920) = #4005920/890:12.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4005920 blocks [PIONEER DVD-RW DVR-111L]
--------------------------------------------------------------

3:51:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-111L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8204124160, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4005920 | lead-out | 1 | 0x41 | 0x00

3:51:56 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

3:51:56 PM #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

3:51:56 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

3:51:56 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 6x (8,310 KB/s)

3:51:56 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:52:08 PM #20 SCSI -1106 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02924200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

3:52:08 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 625
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

3:52:08 PM #22 CDR -1106 File ThreadedTransferInterface.cpp, Line 1771
Power calibration error

3:52:08 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
Could not perform start of Disc-at-once

3:52:08 PM #24 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 6x (8,310 KB/s)

3:52:08 PM #25 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

3:52:08 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.01 (978), size=14528 bytes, created 7/12/1996 7:31:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 7/13/2006 6:08:52 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

__________________________________________________ __________________________________________________ __________________________________________________ ______





LOG TWO
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.01 (978), size=22528 bytes, created 7/18/1996 2:26:30 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-111L>Version: 8.26 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD-RW DVR-111L>Version: 8.26 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-111L atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3160023A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3250823A atapi Port 1 ID 0 DMA: On
DiskPeripheral : HDT722516DLAT80 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111L G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572332kB)
Free physical memory: 1153MB (1180692kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.8.2006
UDF/ISO compilation
4:28:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

4:28:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

4:28:42 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

4:28:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

4:28:42 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

4:28:42 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-111L running

4:28:42 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

4:28:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

4:28:42 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:28:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4109407 (913:12.07, 8026MB)

4:28:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

4:28:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-111L, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0

4:28:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:28:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4109408 (4109408) = #4109408/913:12.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4109408 blocks [PIONEER DVD-RW DVR-111L]
--------------------------------------------------------------

4:28:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-111L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8416067584, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4109408 | lead-out | 1 | 0x41 | 0x00

4:28:43 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:28:43 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

4:28:43 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:28:43 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

4:28:43 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:29:07 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0C2A0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

4:29:07 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 614
L0 Data Zone Capacity set to 2077792 (1FB460h, 4058MB) -> OK, confirmed setting

4:29:07 PM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
Burning Layer 1

4:29:07 PM #24 Text 0 File DVDPlusDualLayer.cpp, Line 651
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

4:29:07 PM #25 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22B45F h (LBN: 1FB45F h, 4058 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................

4:29:07 PM #26 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

4:29:09 PM #27 Text 0 File Cdrdrv.cpp, Line 1286
16:29:09.234 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:11 PM #28 Text 0 File Cdrdrv.cpp, Line 1286
16:29:11.812 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:11 PM #29 Text 0 File Cdrdrv.cpp, Line 1286
16:29:11.906 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:12 PM #30 Text 0 File Cdrdrv.cpp, Line 1286
16:29:12.156 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:12 PM #31 Text 0 File Cdrdrv.cpp, Line 1286
16:29:12.187 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:12 PM #32 Text 0 File Cdrdrv.cpp, Line 1286
16:29:12.468 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:12 PM #33 Text 0 File Cdrdrv.cpp, Line 1286
16:29:12.562 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:12 PM #34 Text 0 File Cdrdrv.cpp, Line 1286
16:29:12.812 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:29:12 PM #35 Text 0 File Cdrdrv.cpp, Line 1286
16:29:12.843 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:30:33 PM #36 Text 0 File Cdrdrv.cpp, Line 1286
16:30:33.359 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:30:33 PM #37 Text 0 File Cdrdrv.cpp, Line 1286
16:30:33.453 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:31:54 PM #38 Text 0 File Cdrdrv.cpp, Line 1286
16:31:54.234 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:31:54 PM #39 Text 0 File Cdrdrv.cpp, Line 1286
16:31:54.328 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:33:15 PM #40 Text 0 File Cdrdrv.cpp, Line 1286
16:33:15.140 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:33:15 PM #41 Text 0 File Cdrdrv.cpp, Line 1286
16:33:15.234 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:34:36 PM #42 Text 0 File Cdrdrv.cpp, Line 1286
16:34:36.046 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:34:36 PM #43 Text 0 File Cdrdrv.cpp, Line 1286
16:34:36.140 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:34:56 PM #44 Text 0 File Cdrdrv.cpp, Line 1286
16:34:56.515 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:34:56 PM #45 Text 0 File Cdrdrv.cpp, Line 1286
16:34:56.640 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:17 PM #46 Text 0 File Cdrdrv.cpp, Line 1286
16:35:17.062 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:17 PM #47 Text 0 File Cdrdrv.cpp, Line 1286
16:35:17.187 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:37 PM #48 Text 0 File Cdrdrv.cpp, Line 1286
16:35:37.562 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:37 PM #49 Text 0 File Cdrdrv.cpp, Line 1286
16:35:37.687 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:58 PM #50 Text 0 File Cdrdrv.cpp, Line 1286
16:35:58.062 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:58 PM #51 Text 0 File Cdrdrv.cpp, Line 1286
16:35:58.187 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:58 PM #52 Text 0 File Cdrdrv.cpp, Line 1286
16:35:58.859 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:35:58 PM #53 Text 0 File Cdrdrv.cpp, Line 1286
16:35:58.984 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:36:19 PM #54 Text 0 File Cdrdrv.cpp, Line 1286
16:36:19.375 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:36:19 PM #55 Text 0 File Cdrdrv.cpp, Line 1286
16:36:19.500 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:36:39 PM #56 Text 0 File Cdrdrv.cpp, Line 1286
16:36:39.906 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:36:40 PM #57 Text 0 File Cdrdrv.cpp, Line 1286
16:36:40.000 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:37:00 PM #58 Text 0 File Cdrdrv.cpp, Line 1286
16:37:00.375 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:37:00 PM #59 Text 0 File Cdrdrv.cpp, Line 1286
16:37:00.500 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:37:20 PM #60 Text 0 File Cdrdrv.cpp, Line 1286
16:37:20.890 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:37:21 PM #61 Text 0 File Cdrdrv.cpp, Line 1286
16:37:21.015 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:37:41 PM #62 Text 0 File Cdrdrv.cpp, Line 1286
16:37:41.421 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:37:41 PM #63 Text 0 File Cdrdrv.cpp, Line 1286
16:37:41.515 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:01 PM #64 Text 0 File Cdrdrv.cpp, Line 1286
16:38:01.906 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:02 PM #65 Text 0 File Cdrdrv.cpp, Line 1286
16:38:02.031 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:22 PM #66 Text 0 File Cdrdrv.cpp, Line 1286
16:38:22.562 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:22 PM #67 Text 0 File Cdrdrv.cpp, Line 1286
16:38:22.656 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:31 PM #68 Text 0 File Cdrdrv.cpp, Line 1286
16:38:31.046 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:31 PM #69 Text 0 File Cdrdrv.cpp, Line 1286
16:38:31.203 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:31 PM #70 Text 0 File Cdrdrv.cpp, Line 1286
16:38:31.453 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:31 PM #71 Text 0 File Cdrdrv.cpp, Line 1286
16:38:31.484 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:51 PM #72 Text 0 File Cdrdrv.cpp, Line 1286
16:38:51.609 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:38:51 PM #73 Text 0 File Cdrdrv.cpp, Line 1286
16:38:51.703 - PIONEER DVD-RW DVR-111L\H0 T0 : Queue again later

4:39:01 PM #74 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B870000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0E 0x58 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x0E 0x55 0xF0 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

4:39:01 PM #75 CDR -1135 File Writer.cpp, Line 311
Write error

4:39:01 PM #76 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:39:01 PM #77 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:49:12 PM #78 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

5:01:41 PM #79 Phase 130 File dlgbrnst.cpp, Line 1832
Generating DVD borders aborted

5:01:41 PM #80 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.01 (978), size=14528 bytes, created 7/12/1996 7:31:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 7/13/2006 6:08:52 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 8:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[budz]

When you uninstalled NERO did you use the NERO CLEAN TOOL? If you didn't then try uninstalling NERO then use the NERO CLEAN TOOL then reboot the pc and reinstall it.

Also do a burst rate test in CDSPEED version 4.51.1. It should correctly be about 23-24 burst rate.

[EAO]

Sorry about the long post. Yes ran Nero Clean Tool and a general clean tool. FWIW i have used both before.

[budz]

Sorry about the long post. Yes ran Nero Clean Tool and a general clean tool. FWIW i have used both before.

download CD/DVD SPEED version 4.51.1 then do the burst rate test.

[EAO]

Done. 47MB/s.

I guess that's cause it udma4.

[EAO]

Well... ran to BB. They hada LG-H10L on sale.

Picked it up. Slapped it in. Ran the same file through it and into imburn and voila... it finalized and is verifying as I type.

That's the shortest period of time a drive has lasted for me. 3 and a half days. Time for RMA. And I think I need to pick up a good external enclosure for it.

Budz: thanks for the input and for helping.

[budz]

so you're returning the Pioneer drive? have you flashed it back to the original firmware? fyi when you flashed it with tdb firmware you voided the original warranty.

[EAO]

Here's how I see it. If I flash the DVD Writer and the flash breaks it - fine. My loss. But if it works and burns perfectly for three days making 5 DL and 2 SL DVD's then the laser went bad and that has nothing to do with the flash.

[budz]

Here's how I see it. If I flash the DVD Writer and the flash breaks it - fine. My loss. But if it works and burns perfectly for three days making 5 DL and 2 SL DVD's then the laser went bad and that has nothing to do with the flash.

No matter what you think on how the drive was flashed, you've still voided the warranty because you didn't use the official Pioneer firmware plain and simple. :P