Nero DVD Video

[AndyJPA]

I am having major problems trying to burn some .vob files

I have selected DVD Video in nero, dragged the vob's to the correct folder but this is now the fifth time its failed to burn, it always fails at the 1% mark, i am using the same media i always have, and up until recently have not had any problems, i just tried to upgrade my firmware on my burner but still i have the same problem

This is the log from nero if anyone with a bit more knowledge can have a look i would appreciate it

Cheers



5C80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 08:24:34
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PHILIPS DVDR885P> Version: P2.0 - HA 1 TA 4 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR885P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVDR885P E: CDRom4
TEAC CD-W54E G: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392692kB)
Free physical memory: 86MB (88320kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.12.2005
UDF/ISO compilation
11:38:25 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started

11:38:25 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)

11:38:25 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:38:26 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted

11:38:26 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory

11:38:26 #6 Text 0 File Reader.cpp, Line 124
Reader running

11:38:26 #7 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVDR885P running

11:38:26 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

11:38:26 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

11:38:26 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

11:38:26 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2278191 (506:15.66, 4449MB)

11:38:26 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

11:38:26 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVDR885P, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

11:38:26 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:38:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278192 (2278192) = #2278192/506:15.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278192 blocks [E: PHILIPS DVDR885P]
--------------------------------------------------------------

11:38:26 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PHILIPS DVDR885P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665737216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278192 | lead-out | 1 | 0x41 | 0x00

11:38:26 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:38:27 #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

11:38:27 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

11:38:27 #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

11:38:27 #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)

11:38:27 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:38:27 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 00 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

11:38:27 #24 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVDR885P
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:38:27 #25 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM

11:38:27 #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

11:38:38 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x04de0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:38:38 #28 CDR -1135 File Writer.cpp, Line 302
Write error
E: PHILIPS DVDR885P

11:38:38 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:38:39 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:38:39 #31 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

11:38:39 #32 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders

11:38:39 #33 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully

11:38:39 #34 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVDR885P
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:38:39 #35 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 08:24:34
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 23/10/2005 19:02:51 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 02:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Bjs]

No replies yet ?

Seem's slow this time of year .. ok .. what the ? is that scsi thing listed in the four drives you have shown ... it's a good chance it's where the problem is currently .

I would remove scsi hardware , and system drivers for such devices and try again ... error seem's related further down in that post of your's .

Try nero after , if no go , uninstall nero , reboot pc , reinstall and try again ... if no .

Install avg , give it a shot to see if something dodgy got in the pc .
Install addaware , it should hunt out problems in registry .

Try nero again ... no .

Ok , stop using nero for the time being , and try using imagetools to burn the dvd's , if it works , fine , if not , move to next option .

You could also use dvd-decryptor to burn an iso image .

To create iso , you may need dvdauthorgui , has mkisofs in it , as pcgedit requires it .

Load dvd in pcgedit , then File , Burn dvd / Create iso
There are three options , links to external tools , these need to be correct .
You also need to set the dvd burner drive letter .

If mkisofs is available , pcgedit will complian if dvd burner letter is not set , but will create iso , that dvd-decrypter can burn later .

If the two methods mentioned above work , then the problem exists in nero , file corruption in the main product ... a clean unistall and reinstall my fix problem .

The only way to test the physical drive is to get it too another pc for testing , then you'll be able to asses if its the drive having problem .

If the drive is fine , and nero reload still wont work , the problem is embedded in the os elsewhere .

These can be caused by the installation of new , recent programs either downloaded or bought .. there are a number of these that conflict with other products .. I have seen too many this year already .

Quickest way to make an enemy of me , is to release a product that interferes with bbmpeg ... serifs movie product dose this ... cannot access bbmpegs settings if this is installed ... I'll burn their house down later ... uninstall serif product cure's problem .

Use system restore to return to when things were working well , if it's possible ...

Warning : Any program installed after restore point , when restore is used , all of these programs "exe's" will be nulled ... you will need to unistall all non opperating programs , then reinstall them , to get them back up and running ... ms failed to warn user's of this trap .

Ok : Clean reinstall .

1 : Backup favs to zip file
2 : Export your contacts from email program .
3 : Copy important emails .
4 : Write down you internet access details .
5 : Backup any file you think important to keep .
6 : Download the latest drivers for all pc hardware , backup as well .

Transfer all by burning to cd , if that dosent work , floppy , second hard drive , network connected pc .

Only then should you proceed with next step .

last and final way to get things up and running again , is to completely reload the os of the pc ... a clean reinstall ... never use xp's "may I fix it for you" when booting from xp's cd ... it will stuff things right up .

If you have usb2 :

Latest edition : install xp with sp2 , then install all hardware drivers .

Xp without sp2 : Install xp , then system drivers (not usb2) , install sp2 , then install motherboard usb2 drivers .... thats the correct way .

See how you go ...