dvd shrink error

[grimee1]

i riped a movie to my HD using dvdfab and tried to burn wit dvd shrink half way thru it go a error sayn dvd shrink encountered a error etc.. anyone no why or what i can use for this to work.. Thanx in adavnce

[hech54]

Need More Info.....the main reason for needing more info is because DVDShrink is not a burning program.

[guns1inger]

Half way through what ? Analysis ? Encoding ? Burning ?
Which version of DVD Fab Decrypter ?
What burning engine are you using (if this is where it is crashing ?)

[Cobra]

Would this movie happen to be Madagascar? I had issues. The solution may well be to run it through VobBlanker - you can just open it, tell it where the input files are and where to put the output files. Set it off, and DVD Shrink should have no problem after that.

If it is Madagascar, you may want to use VobBlanker to cut out all the adverts/trailers and a section which is about 540MB long, and is 40 minutes of black screen. Here's a guide:

https://www.videohelp.com/forum/viewtopic.php?t=247372

[jtoolman2000]

I have not a clue what you are talking about! My crystal ball is not working today. Tell us what it is you are actually doing. Title of the movie woould also help. Stage of the process before the error pops up,,,,, and so an.

Shrink is a transcoder not a burner.

[grimee1]

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU53 - HA 1 TA 0 - 6.3.1.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA CD/DVDW SD-R5372 F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 243MB (249448kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.12.2005
NeroAPI
7:50:33 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

7:50:33 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

7:50:33 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

7:50:34 AM #4 Text 0 File Reader.cpp, Line 118
Reader running

7:50:34 AM #5 Text 0 File Writer.cpp, Line 124
Writer TOSHIBA CD/DVDW SD-R5372 running

7:50:34 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

7:50:34 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:50:34 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:50:34 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

10:26:23 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

10:26:23 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

10:26:23 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

10:26:23 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

10:26:23 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA CD/DVDW SD-R5372]
--------------------------------------------------------------

10:26:23 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286144 | lead-out | 1 | 0x00 | 0x41

10:26:23 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

10:26:23 AM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

10:26:23 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

10:26:23 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 6x (8,310 KB/s)

10:26:23 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:26:23 AM #21 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

10:26:23 AM #22 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

10:36:15 AM #23 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x20 0xA6 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

10:36:15 AM #24 CDR -1135 File Writer.cpp, Line 304
Write error

10:36:15 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:36:15 AM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:36:15 AM #27 SCSI -1046 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

10:36:15 AM #28 SCSI -1046 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

10:36:15 AM #29 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc

10:36:15 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

10:36:15 AM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 6x (8,310 KB/s)

10:36:15 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

10:36:15 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


movies are life of david gale and madagascar...Thanx for repyn

[Cobra]

grimee1,

Do the following:

- Rip the DVD with DVDFab Decrypter
- Pass the files through VobBlanker
- Feed into DVD Shrink
- Burn the resulting files

No problem.

Madagascar-specific tips:

- Use VobBlanker to remove all the trailers and adverts, as well as a 540MB, 40-minute long section that has nothing but blackness on it
- When you feed it in to DVD Shrink, you can get the best results by leaving everything set to "Automatic" for the compression (when normally you should put everything to "Custom ratio" and compress it as much as possible to make more space for the main film)
- Set AEC (Adaptive Error Compensation) to "Maximum smoothness"
- Ensure you do the "Deep analysis"

See my previous post in this thread for a guide to get rid of the unwanted sections of DVD using VobBlanker.

Following this advice, you'll get the best possible copy of Madagascar.

Hope this helps,

Cobra

[grimee1]

Thanks for all the help im using the freeware version of dvdfab and dvdshrink 3.2 and newly installed nero 6.0. i will try all the help that was giving to me.. anyone no why i got that long error message when i tried to burn a back up of life david gale??
Thanx