Hi,
I have been using an external Lacie Dual Layer DVD burner (firewire) for a while with single layer disks.
I tried using Traxdata DL DVDs but the drive would not recognize them. I read on this site that a firmware upgrade is available for the NEC2510A (which this drive is) that would enable use of these disks. However upgrading the firmware of the Lacie is probably not a practical idea.
Lacie reccomend Verbatim DL disks but these are still expensive. Does anyone know what other DL DVDs are compatible with this drive?
Memorex disks are cheap but I don't want to risk wasting more money.
Cheers.
+ Reply to Thread
Results 1 to 2 of 2
-
-
the three DL media you mentioned are pretty much the only ones available. RICOH DL is supposedly available in Japan, but not many writers can use it (at least from what little I have heard.)
Upgrading firmware might help if any firmware contain new write strategies for the Traxdata (Ritek) DL media. Just be sure you use the correct firmware for your drive.
I suggest you check you the cdfreak forums.
Recording Hardware:
http://club.cdfreaks.com/forumdisplay.php?f=61
NEC subforum:
http://club.cdfreaks.com/forumdisplay.php?f=86Some people say dog is mans best friend. I say that man is dog's best slave... At least that is what my dogs think.
Similar Threads
-
Best IDE Burner for burning Dual Layer or Single Layer Discs for Duplicator
By Konfusion in forum DVD & Blu-ray WritersReplies: 7Last Post: 18th Nov 2011, 03:16 -
Dual Layer problem. Layer break issue...
By papegoja in forum DVD RippingReplies: 23Last Post: 9th Jun 2010, 22:52 -
Dual layer disc error (2nd layer not burning properly - AVCHD)
By hhhgamewmx7 in forum Authoring (DVD)Replies: 7Last Post: 24th Aug 2008, 09:00 -
dual layer DVD-R in single layer burner?
By snafubaby in forum MediaReplies: 5Last Post: 4th Oct 2007, 13:39 -
Help on Dual Layer DVD
By mn072065 in forum DVD RippingReplies: 9Last Post: 16th May 2007, 09:36